Electronic Accessories
Compact! Car System Digital satellite with small enclosure, ideal even under confined space conditions, such as e.g. in shadow areas that are not accessible on your installation.
On order, lead time to be confirmed
Big technology in a small space - convert now and get started! Our new, ultra-compact conversion kit with integrated 5 x 5 mm ultrasonic capsule makes the digitalisation of Car System vehicles easier than ever before. Thanks to its minimal size, it is perfect for retrofitting even particularly small vehicle models - ideal for individual conversions and creative projects. With just one circuit board, any analogue model can be turned into a fully-fledged digital vehicle - equipped with: Ultrasonic localisation for precise vehicle tracking Fully automatic distance control Dynamic speed adjustment in play mode The circuit board also features solder pads for additional lighting and sound functions - perfect for experienced hobbyists who want to get the most out of their model. Small. Powerful. Future-proof.
On order, lead time to be confirmed
System sound! Loudspeaker for retrofitting conversion vehicles in conjunction with »Analog-Digital Conversion Kit«, Art. 163701.
On order, shipped within 4-5 days
Modular cable, RJ12 plug to RJ12 plug, 6 wires, all assigned, 1:1, length: 0.5 m. Connection cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular extension, RJ12 plug to RJ12 socket, 6 wires, all assigned, 1:1, length: 2 m. Extension cable for all common LocoNet modules.
On order, shipped within 4-5 days
Modular junction/adapter, 1 x RJ12 socket on 2 x RJ12 socket, 6P6C, all assigned, 1:1. Adapter/junction to connect to all common LocoNet cables.
On order, lead time to be confirmed
FALLER Car System USB charger with the following features: - Can be used worldwide – USB A from 1.1 with 500mA power handling capacity. - Suitable for all FALLER Car System vehicles – any generation and gauge (except FALLER Car System Digital) - Suitable for all original FALLER Car System batteries – installed battery type is automatically detected and the charging current is adjusted accordingly. - Automatic shutdown – switches off after a certain amount of time and when charging end voltage has been reached. - LED signals for status and error messages. Technical data: - Input side: connection type: USB A ('male'), voltage: 5 V, current max: 0.5A - Output: voltage max: 2.4 V, current max: 0.5 A
On order, shipped within 4-5 days
The extremely economical beginner’s package with the major functional elements allowing to build Car System installations.
On order, shipped within 4-5 days
"Nearly every traffic situation can be simulated. Whether you want to plan a bus stop, diagonal parking lot, work zone, right-hand or left-hand traffic. The vehicle will stop by itself. Along with 8 inputs and 8 outputs, a total of 15 control programs can be selected via microswitches. Rotary control knobs allow to adjust different periods of time. Comprehensive instructions for use with plenty of examples of connections and control sequences are supplied. 16 V alternating voltage
On order, lead time to be confirmed
This Traffic Light Control allows you to pilot every kind of traffic light installed on Car System layouts. Power supply through FALLER Transformer (art. 180699). With detailed instructions for use. Functions: - up to 4 traffic lights can be connected (12 LEDs) - the length of time of the different lights can partly be programmed at will - up to 16 different LEDs (of 20 mA each) can be connected without having to use a surge protector - running lights possible with up to 8 lamps
On order, lead time to be confirmed
Prepared for connection to the Traffic Light Control (item no. 161654).
On order, shipped within 4-5 days
Interacting with scenarios on the spot. Module composed of 2 relays (12 V DC) on small PCB that allows to trigger various actions on the model layout by plugging some wire straps (also called jumpers). - Connected to the »Traffic-Control«, Art. 161651 or the »Extension module«, Art. 161352 the module can switch on and off e.g. a smoke generator, Art. 180690 or a modeller’s synchronous motor, Art. 180629 (alternating current). - Connected to an »Extension module« one of the outputs can actuate a motor in forward motion, while the other output will actuate the motor in reverse motion, by plugging the wire straps accordingly. - It is also possible for the module to link various digital systems potential-free: one of the systems switches the relay on and that signal will be processed in another system. - By plugging the wire straps accordingly, two signals can be generated out of one signal: since a normally closed contact and a normally open contact of the relay are used, either one contact or the other will be closed depending on whether the relay has pulled up or is open. By suitably connecting the relay module it is also possible to reverse a signal. - By connecting the relay module in series, it is possible to switch higher current values or even other voltages (e.g. an alternating voltage) on modules the outputs of which are too weak for the required current. Further possible uses are described in the instruction manual supplied.
On order, shipped within 4-5 days
The speed trap is equipped with a very bright LED and is prepared for connection with a series resistor for 12-16 V DC. The flashing light is triggered when the built-in sensor (Art. 161773, not included) is passed over. A flashing light box for H0 or N can be built.
On order, shipped within 4-5 days
Advantageous combination. The set contains all parts required to build a personalized functioning lane width neutral bus stop. Along with a control unit suitable for a bus stop (16 V alternating current) there are 1 Stop section, 1 Branch-off junction, 2 Sensors, 1 additional magnet (H0/N), 5 m of Special contact wire, 1 mounting template (H0/N) as well as detailed instructions within the set.
On order, shipped within 4-5 days
This groove cutter was developed and made especially for laying the contact wire in the FALLER Car System. Detailed instructions enclosed.
On order, shipped within 4-5 days
10 m. Diameter and alloy adapted for use with steering magnet.
On order, shipped within 4-5 days
Parking space for the permanent stopping of vehicles in car parks. The vehicle is reactivated by means of the magnetic field of the electric coil. Connection: 16 V, AC voltage. Current draw 330 mA.
On order, lead time to be confirmed
The accumulator voltage is interrupted via a reed switch in the vehicle by means of the magnetic field of the electric coil. Connection: 22 V, DC voltage, 160 mA.
On order, shipped within 4-5 days
Whenever it is activated the magnetism of the branch-off junction steers a vehicle onto a second turning-off guide wire. This occurs via the magnet fastened to the steering slider built into the vehicles.
On order, shipped within 4-5 days
Suitable for charging all accumulators built into Car System vehicles.
On order, lead time to be confirmed
Sensors are designed for the control of stop points, branch-off junctions, etc. They are activated by additional magnets fitted to the bottom of vehicles. Connection to Traffic-Control (art. 161651). Max. switching power 5 W Max. switched current 200 mA
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red with a control box. Equally suitable for Car System, Car System Digital or independent operation. The most current international signal sequences can be triggered via the inputs of the box: one regulator each for country setting and duration. Possible signal lights: -green/yellow/red -green/yellow/red/red-yellow -green/green blinking/yellow/red/red-yellow.
On order, shipped within 4-5 days
Two traffic lights with LED signals in the colours green, yellow and red. Equally suitable for Car System and Car System Digital. By connecting them to the control unit »Traffic Light Control« art. 161654 they help represent the international signal sequence with three states (green/yellow/red). By connecting them to an »Extension module« art. 161352 they help represent the international signal sequences with three states (green/yellow/red), four states (green/yellow/red/yellow-red) or five states (green/green blinking/yellow/red/red-yellow).
On order, shipped within 4-5 days
Two traffic lights with LED light signals in the colours green, yellow and red without control. Equally suitable for Car System, Car System Digital or stand-alone operation. The construction site traffic lights are ready for connection for: 12-16 V AC/DC. Height: 32 mm. We recommend the control units: 161654, 161352, 161345.
On order, shipped within 4-5 days