Electronic Accessories
Next18 bridge plug
On order, lead time to be confirmed
18-pin Next18 bridge plug with "LED flash suppression circuit"
On order, lead time to be confirmed
Interior lighting, with yellow LEDs for coaches with bogies, 100 mm long light tube, "incandescent light effect".
On order, lead time to be confirmed
Interior lighting, with white LEDs for coaches with bogies, 100 mm long light tube, "neon lamp light effect".
On order, lead time to be confirmed
For the 43581-43586 coaches. Consisting of a power feed, a circuit board with 10 light bulbs, and a current-conducting close coupler.
On order, shipped within 10-15 days
For the models of the TEE/IC observation coaches such as those in the 26727 train and in the 42995 coach set. Only suitable for coaches from year of construction 2002 on. Consisting of a power feed, 2 lamp bases, 2 light bulbs, and a connecting cable. The light guide is already present in the coaches.
On order, shipped within 10-15 days
For the 4035, 4038, 4039, 4107, and 4108 coaches. Consisting of a power feed with a lamp socket and a light bulb.
On order, shipped within 10-15 days
For the 4131, 4132, and 4133 coaches. Consisting of a power feed, an adjustable lighting strip, 2 lamp sockets, and 2 light bulbs.
On order, shipped within 10-15 days
For the 42101, 42131, 4214, 42141, 42142, and 4229 coaches. Consisting of a power feed, a lighting strip, a lamp socket, and a light bulb.
On order, shipped within 10-15 days
Same as 7330, but for shorter express coaches. For the 41351, 41361, 42383, and 42751 coaches.
On order, shipped within 10-15 days
Universal circuit board with two red LEDs, suitable for the UIC-x and TEE coaches of the new generation in the Märklin H0 programme (coach length 28.2 cm). 2 fixed connecting cables.
On order, shipped within 10-15 days
Model Special circuit board with two red LEDs, suitable for the local service coaches of the new generation in the Märklin H0 programme (coach length 28.2 cm). 2 fixed connecting cables. Highlights Retrofittable LED tail lamp for the new "Silberlinge"
On order, shipped within 10-15 days
Model Electronics for radio interference suppression for C tracks, with connecting cables in red and brown as well as flat plugs. One is required in each of the conventional and digital circuits. Designed for a maximum load current of 2 A. Recommended for the Mobile Station and analogue controllers. Note The FCC interference suppression set is only required in the USA!
On order, shipped within 10-15 days
Model Electronics for radio interference suppression with a screw terminal connection. One is required in each of the conventional and digital circuits. Designed for a maximum load current of 5 A. Recommended for the Central Station and analogue controllers up to 5 A output current. Note The FCC interference suppression set is only required in the USA!
On order, shipped within 10-15 days
With a 10 V light bulb. For use in the 8950 lighting base, the 8939 signal (old version) and 8940, the 8992 level crossing, in all locomotives that can be lighted and in models of ICE intermediate cars (exception: lighting with maintenance-free LEDs).
On order, shipped within 10-15 days
The DiMAX radio conversion set 2.4GHz consists of the 8131001 DiMAX radio receiver 2.4GHz and the 8131901 DiMAX radio transmitter 2.4GHz. This allows for an affordable entry into the new radio system. The operating instructions can be found on the relevant product page.
On order, lead time to be confirmed
The new DiMAX radio receiver operates on the 2.4GHz frequency internationally and can therefore be used worldwide. It supports up to 4 radio users and can be used with both Central stations with Massoth bus (DiMAX 800Z, 1200Z, 1210Z, LGB 55006 and PIKO 35010) and analogue controllers (LGB 51070, 51079 or PIKO 35002). The range is up to 100 metres in the open air. For the first time, the classic whip antenna is no longer required, as it is internally mounted.
On order, lead time to be confirmed
This retrofit wireless transmitter can equip all navigators currently on the market with the latest 2.4GHz radio technology. This ensures that the hand controller remains up to date in the future. The 2.4GHz wireless transmitter requires at least Navigator firmware version 2.2.
On order, lead time to be confirmed
In addition to the DiMAX EU radio transmitter (8133301), the circuit board including the antenna (without housing) is now also available as a spare part for the corresponding DiMAX EU radio receiver II (8133101). This makes it easy for customers to continue operating and maintaining existing DiMAX digital layouts with the old radio system, even after many years.
On order, lead time to be confirmed
The DiMAX radio transmitter has an extended range (up to 100 m) and can be retrofitted in the Navigator. A small hole through the housing wall is required.
On order, lead time to be confirmed
A small, powerful switched-mode power supply, ready-made for connection to the DiMAX PC module or a small Central Station.
On order, lead time to be confirmed
The DiMAX 24 V | 12.5 A switched-mode power supply is the ideal power feed, precisely matched to the DiMAX product range (e.g. Digital Central Station 1210Z or Digital Booster 1202B). It is also suitable for other applications requiring consistently high power.
On order, lead time to be confirmed
The DiMAX switched-mode power supply 24V | 12.5A is the ideal power supply, precisely matched to the DiMAX product range (e.g. Digital Central Station 1210Z or Digital Booster 1202B). It is also suitable for other applications where a consistently high output is required.
On order, lead time to be confirmed
The DiMAX 1202B digital booster is a modern and powerful digital booster. With two separate output stages of 6 amps running current each, it offers ample reserves for 2 additional track sections on the model railway layout. If the 6 amps per track section are not sufficient, the two output stages can be connected together on the output side to form one output stage of 12 amps. The track voltage can be set in 5 steps: 14, 16, 18, 20 and 22 volts. A switched-mode power supply of 18-24 volts (DC) with sufficient power (min. 12A) is required for the power supply, for example the DiMAX 1200T switched-mode power supply (8135501) with up to 15 amps peak power. All desired settings are made with easy-to-use buttons on the front of the booster. A clear LED display shows the current settings and the operating state. With its different connection options, the booster can be used with most digital systems: booster bus socket for connection to Massoth / DiMAX digital command stations booster bus socket for connection to LGB MZS II and III digital command stations C-D-E terminal (e.g. for Lenz, Tams, Roco, etc.) Please observe the separate CDE usage note! Märklin CAN* (for operation on Märklin CS 2 / CS 3) is fully integrated from production year 2019 (new in 2019) direct track signal tap via terminals C, D for all digital command stations that do not provide a usable booster bus It can be used regardless of the data format and can therefore be operated, in addition to NMRA/DCC, with Motorola, Selectrix, etc., for example. The booster supports the following operating modes: normal running/booster mode braking booster function with active pass-through of function commands RailCom Märklin CAN / MfX* The booster can be operated on the Märklin CS II / III Central Station as a running booster. The matching connection cable 8312086 DiMAX Booster CAN bus cable for Märklin CS is not included in the delivery. MfX feedback is not available at present and is to be retrofitted at a later date with an additional module.
On order, lead time to be confirmed