Spare Parts
Universal retrofit set for buffer beams
On order, shipped within 4-5 days
Sleeve buffer set, black, round, Ø 2.4 mm
On order, shipped within 4-5 days
Rod buffer set, black, round, Ø 2.4 mm
On order, shipped within 4-5 days
Buffer set, black, rectangular, 2.7 mm x 2.2 mm
On order, shipped within 4-5 days
Bellows retracted
On order, lead time to be confirmed
Bellows extended
On order, lead time to be confirmed
Standard coupling head with hook
On order, lead time to be confirmed
Metal disc wheelset, Ø 31.4 mm
On order, shipped within 4-5 days
Metal spoke wheelset, Ø 31.4 mm
On order, shipped within 4-5 days
Detailed miniature reproduction of the original screw coupler. The length can be varied by turning the threaded inner part. Movable by means of joints. With a mounting spring. Contents 10 pieces. With few exceptions, the Profi-1 models produced since 1987 offer the possibility of replacing the standard claw coupler with this screw coupler. This coupler matches its full-size prototype in appearance and in operation. However, operation with this coupler usually requires very large minimum radii of 3.0 m to 3.5 m depending on the model. Current Profi-1 models that can be retrofitted with this coupler can be recognised by the corresponding pictogram.
Content: 10 pc. (CHF 6.29 / 1 pc.)
On order, shipped within 10-15 days
Model Detailed steam heating hose for retrofitting. Pack of 6 pieces for 3 coaches. For completing the buffer beam on locomotives, passenger coaches and express train coaches. An assembly drawing is included. Cannot be used in conjunction with the claw coupler. Highlights Vehicle super-detailing
Content: 6 pc. (CHF 3.65 / 1 pc.)
On order, shipped within 10-15 days
Model Detailed brake hose for retrofitting. The set contains 4 right-hand and 4 left-hand brake hoses. Suitable for vehicles with a square mount. Highlights Vehicle super-detailing
On order, shipped within 10-15 days
2 below-baseboard mounting sets for the 59079 point motor. The sets consist of operating rods, retaining plates and matching mounting hardware. (H1092). Can be used up to a board thickness of approximately 45 mm.
On order, shipped within 10-15 days
Model The Märklin 7194 reversing unit slide springs are a practical spare parts set for all conventional Märklin locomotives. The springs are used in the reversing switch to ensure reliable operation. This set allows defective or lost springs to be replaced quickly, so that your locomotives work perfectly again. Highlights Spare parts set with 5 reversing unit slide springs Suitable for all conventional Märklin locomotives Ensures reliable operation of the reversing switch Ideal for replacing defective or missing springs
Content: 5 pc. (CHF 0.76 / 1 pc.)
On order, shipped within 10-15 days
Model Contents: 50 close coupler heads 357874. For fitting in vehicles with a standard coupler pocket (NEM 362) and a guide mechanism, as well as in vehicles with a lower buffer height in accordance with NEM 303. Compatible with standard couplers (NEM 360). Highlights Close coupler heads for vehicles with a lower buffer height
Content: 50 pc. (CHF 1.08 / 1 pc.)
On order, shipped within 10-15 days
Model Contents: 10 close coupler heads. For fitting in vehicles with a standard coupler pocket (NEM 362) and a guide mechanism, as well as in vehicles with a lower buffer height in accordance with NEM 303. Compatible with standard couplers (NEM 360). Highlights Pack of 10 close coupler heads for vehicles with a lower buffer height
Content: 10 pc. (CHF 1.39 / 1 pc.)
On order, shipped within 10-15 days
Model For connecting vehicles closely coupled together with single-pole current transfer. Suitable for fitting in the standard close coupler pocket of all modern Märklin H0 coaches 26.4 cm and 27 cm long with a guide mechanism. A single lighting pickup shoe can therefore be enough for each lighted group of coaches. In addition to two current-conducting close coupler heads, the standard contents supplied also include the current transfer elements for retrofitting the close coupling mechanism as well as the interior lighting cable connecting terminals for one coach in each case. Coupling and uncoupling by hand on the layout is possible. Pack with 2 close coupler heads and current transfer elements for equipping one coach. Assembly instructions are included. Note The 72020 separable current-conducting close coupler is suitable as an alternative or as a conversion option for the current-conducting rigid coupler drawbars from the 7319 detail set.
Content: 2 pc. (CHF 7.45 / 1 pc.)
On order, shipped within 10-15 days
For connecting vehicles closely coupled together with single-pole current transfer. Suitable for fitting in the standard close coupler pocket of all "Donnerbüchse" coaches based on 4313, 4314 and 4315. A single lighting pickup shoe can therefore be enough for each lighted group of coaches. In addition to two current-conducting close coupler heads, the standard contents supplied also include the current transfer elements for retrofitting the close coupling mechanism. Coupling and uncoupling by hand on the layout is possible. Pack with 2 close coupler heads and current transfer elements for equipping one coach. Assembly instructions are included.
On order, shipped within 10-15 days
Model Separable close couplers with a single-pole electrical connection for the lighting of the express coaches of the 1928-30 standard design with a lower buffer height in accordance with NEM 303. Suitable for example for the prepared coaches 42500, 42510, 42520, 42521, 42530, 42540 when the 73410/73411 LED interior lighting is installed. One coach in the train consist requires a 73406 pickup shoe. Contents: 2 current-conducting close coupler heads for standard coupler pockets with contacts, 2 coupler drawbars with built-in contact springs, 2 spacer plates with soldered-on cables, 1 common return spring for the bogie with a soldered-on cable, installation instructions. Coupling and uncoupling by hand on the layout is possible; they will also couple with regular close couplers without an electrical contact. Highlights Current-conducting close coupler heads for installing interior lighting in the express coaches of the 1928-30 standard design, with a lower buffer height
On order, shipped within 10-15 days
Model Contents: 10 current-conducting close coupler heads. For fitting in vehicles with a standard coupler pocket (NEM 362) and a guide mechanism, as well as in vehicles with a lower buffer height in accordance with NEM 303. Highlights Pack of 10 current-conducting close coupler heads for vehicles with a lower buffer height
Content: 10 pc. (CHF 1.89 / 1 pc.)
On order, shipped within 10-15 days
Interchangeable with the standard Märklin plastic coupler. 10 couplers for locomotives (for 701560 and 704210) and 40 couplers for rolling stock (for 701570 and 701580). Reduced coupler play on vehicles being pulled.
Content: 50 pc. (CHF 1.12 / 1 pc.)
On order, shipped within 10-15 days
Contents: 10 Relex coupler heads. For fitting in vehicles with standard coupler pockets (NEM 362).
Content: 10 pc. (CHF 1.39 / 1 pc.)
On order, shipped within 10-15 days
Type SBS 10 for older design locomotives. Interchangeable with 7218.
On order, shipped within 10-15 days
Scissors-type pantograph
On order, shipped within 10-15 days