Spare Parts
Visaton speaker FRS 7, 66.5×66.5mm, 15 W, 8 Ω, HiFi
On order, lead time to be confirmed
Potentiometer for manual volume control of the eMOTION sound decoder (also suitable as a spare part for LGB).
On order, lead time to be confirmed
Fit your locomotive’s sound with a retrofitting reed contact board. This allows the bell, whistle, or horn to be triggered by a track magnet.
On order, lead time to be confirmed
Synchronise the sound and wheel rotation (cylinder advance) with the clock generator, sound axle and magnetic ring (supplied).
On order, lead time to be confirmed
Switch the motor of the LGB® 2067 track-cleaning locomotive, the uncoupling drive of the LGB® DUO locomotive or the pulsed smoke generator. You can also use it to safely switch your own home-built creations on and off. Supply voltage: 16-24V Max. output current: 8 A Here are the details: various control options controls old LGB® pantograph drives controls the LGB® 2067 track-cleaning motor controls the uncoupling drives of LGB® DUO locomotives switches the supply voltage for the pulsed smoke generator double changeover switch output control voltage 16-24 volts integrated freewheel diode
On order, lead time to be confirmed
The completely newly developed fixed-voltage regulator provides stable 6V and 1.5 Ampere output current for consumers (briefly 2A), such as servos, vaporisers, lighting, etc. Supply voltage: 5-24V AC/DC/DCC.
On order, lead time to be confirmed
Now with reflector! Small, universally usable firebox module. Operation via digital decoder or analogue voltage supply. Supply voltage: AC/DC/DCC 5-24V Current consumption: 16mA Here are the details: universal firebox module red and orange LED with reflector for better light distribution (included loose) suitable for analogue and digital operation various control options firebox flicker already integrated firebox control possible either internally or externally works from around 5 volts track voltage current consumption of only 16mA particularly small dimensions, also fits in the LGB® Stainz, for example
On order, lead time to be confirmed
To protect your valuable locomotive model from damage caused by short circuits, even up to the complete burning out of the locomotive, there is now the Electronic Fuse (8242070). If currents greater than 4 amperes flow in the locomotive model, the power feed is automatically interrupted. A good insurance policy for every garden railway model and certainly a worthwhile investment! (2/pack)
On order, lead time to be confirmed
Plug-in light bulb, suitable for LGB, etc. (10/pack)
On order, lead time to be confirmed
The plug-in LEDs for 5V herald the next generation of headlights. For the first time, a mass-produced, retrofit, and easily plug-in warm white LED for headlamps is available. The legally protected miniature circuit boards with LEDs specifically specified for this purpose optimally replace a light bulb with its round warm white light point. No difference can be seen. Power saving and the significantly longer service life ultimately make the LED a more cost-effective light source compared to conventional light bulbs.
On order, lead time to be confirmed
The plug-in LEDs for 5V herald the next generation of headlight lighting. For the first time, a mass-produced, retrofit, and easily plug-in warm white LED for headlamps is available. The legally protected miniature circuit boards with LEDs specifically specified for this purpose optimally replace a light bulb with its round warm white light point. No difference can be seen. Power saving and the significantly longer service life ultimately make the LED a more cost-effective light source compared to conventional light bulbs.
On order, lead time to be confirmed
Plug-in light bulb, suitable for LGB, etc. (10/pack)
On order, lead time to be confirmed
The plug-in LEDs for 24 V (also suitable for 19 V) herald the next generation of headlight lighting. For the first time, a mass-produced, retrofit, and easily plug-in warm white LED for headlamps is available. The legally protected miniature circuit boards with LEDs specifically specified for this purpose replace a light bulb with its round warm white light spot optimally. No difference can be seen. Power saving and the significantly longer service life ultimately make the LED a more cost-effective light source compared to conventional light bulbs.
On order, lead time to be confirmed
The plug-in LEDs for 24 V (also suitable for 19 V) herald the next generation of headlight lighting. For the first time, a mass-produced, retrofit, and easily plug-in warm white LED is available for headlamps. The legally protected miniature circuit boards with LEDs specifically specified for this purpose replace a light bulb with its round warm white light spot optimally. No difference can be seen. Power saving and the significantly longer service life ultimately make the LED a more cost-effective light source compared to conventional light bulbs.
On order, lead time to be confirmed
The applications for the fittings are versatile and they are a find for crafters. (10/pack)
On order, lead time to be confirmed
These two locomotive socket cables are universally suitable for connecting lighting, decoders, coaches and many other components to the locomotive socket, which is present on many LGB locomotives. The 45 cm long twin cable is already stripped and tinned at one end from the factory and can be soldered directly. If required, the twin cable can be shortened to the individually required length.
On order, lead time to be confirmed
The 8312060 connection cable set consists of eight folded plug-in cables in four different colours for 1.3mm solder pins. The connection cables are ideally suited for connecting decoders or LGB semaphore signals. The contents supplied also include four screws for mounting decoders and other components.
On order, lead time to be confirmed
LGB interface cable, 6-pin
On order, lead time to be confirmed
DCC interface cable, 10-pin
On order, lead time to be confirmed
eMOTION 8FL interface cable (8-pin)
On order, lead time to be confirmed
Connecting cable for the light strips 8121010, 8121020, 8123010, 8123020
On order, lead time to be confirmed
Connecting cable for track modules such as 8156610 signal decoder 1K III or 8170090 FB track contact III.
On order, lead time to be confirmed
The MiniCT3 double distributor is designed with a dual configuration for two separately controlled components. This allows the cables for uncouplers and pantograph drives, or other components, to be extended by 50 cm simultaneously, particularly with large locomotive models. The contents supplied include 2 pieces.
On order, lead time to be confirmed
The function adapter allows you to connect additional digital function modules, such as shunting couplings and pantograph drives, directly in the supply line from the gearbox to the electronics. Two connecting cables are included. Further digital and analogue circuits are possible.
On order, lead time to be confirmed