Spare Parts
Single-arm pantograph
On order, shipped within 10-15 days
Type SBS 65 for modern locomotives. Interchangeable with 7218.
On order, shipped within 10-15 days
For locomotives 88021 and 8831.
On order, shipped within 10-15 days
The use of large LEDs significantly improves the lighting of the wagon. A built-in buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode, while in the digital version (VHDM DCC-compatible) they can be freely programmed with various effects. Each set includes two light strips.
On order, lead time to be confirmed
The next generation of the proven and popular 100 mm LED light strips is the logical further development for even more realistic and convincing coach interior lighting. 8121011 LED light strip 100mm can be operated both analogously and digitally. A decoder is not integrated.
On order, lead time to be confirmed
The use of large LEDs significantly improves the lighting of the wagon. A built-in buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode; in the digital version (VHDM DCC-compatible), they are freely programmable with various effects. The contents supplied include two light strips, and the digital version also includes two matching connecting cables.
On order, lead time to be confirmed
The newly developed light strips, available in 100 mm and 330 mm lengths and 10 mm width, are fitted with warm white, very bright LEDs on a white circuit board. They can be used in both digital and analogue operation with a voltage of 5 – 24 volts. Screw holes at various intervals allow mounting in most series vehicles; alternatively, gluing is possible, and if necessary, the long version can be shortened.
On order, lead time to be confirmed
The use of large-area special LEDs significantly improves the lighting of the wagon. A permanently integrated buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode; in the digital version (VHDM DCC-compatible), they are freely programmable with various effects. Each set includes two light strips.
On order, lead time to be confirmed
The next generation of the proven and popular 300 mm LED light strips is the logical further development for even more realistic and convincing coach interior lighting. 8123011 LED light strip 100 mm can be operated both analogously and digitally. A decoder is not integrated.
On order, lead time to be confirmed
The use of large-area special LEDs significantly improves the lighting of the wagon. A permanently integrated buffer capacitor powers the light strip for up to 30 seconds. Two additional outputs operate directionally in analogue mode; in the digital version (VHDM DCC-compatible), they are freely programmable with various effects. The contents supplied include two light strips each; the digital version also includes two matching connecting cables.
On order, lead time to be confirmed
eMOTION 4WLR coach lighting control (2/Pack) Less flickering, simple operation: the lighting upgrade for your LGB RhB express coaches. The eMOTION 4WLR coach lighting control replaces the factory-fitted analogue lighting control and supplies the existing coach lighting. Its integrated voltage buffer bridges brief interruptions in the power supply and thereby reduces annoying flickering, for atmospheric journeys through the garden in the evening. Reuse the existing lighting The connecting wires of the coach lighting are resoldered to the corresponding solder pads on the new circuit board. Four light outputs are available for this. Two MiniCT sockets on the top allow table lighting to be connected; an additional solder pad makes it easier to wire them in series, for example in an RhB restaurant car. For reliable current collection, both bogies can be connected to the two track connections on the underside of the circuit board. Voltage buffer already integrated The standard voltage buffer stores 39 Ws of energy. During brief contact interruptions it continues to supply the lighting. Even after the track voltage is switched off, the stored energy remains available until the buffer is discharged. The bridging time depends on the current requirement of the connected lighting. For analogue and DCC operation The 4WLR works with both analogue DC voltage and DCC track voltage. In both operating modes the lighting is switched on and off with the integrated slide switch. No programming is required. In analogue operation the lighting needs a sufficient running voltage of at least about 7 to 8 volts. On a DCC layout it remains supplied even when stationary as long as track voltage is present. The 4WLR does not contain a digital decoder and therefore cannot be switched via digital function keys. Advantages at a glance Especially for modernising LGB RhB express coaches Replacement for the factory analogue lighting control Integrated voltage buffer to reduce light flickering Four light outputs for the existing coach lighting Two MiniCT sockets for table lighting Track connections for both bogies Manual on/off switch, no programming For analogue DC voltage and DCC track voltage Contents supplied: two eMOTION 4WLR coach lighting controls and operating instructions. Installation note: replacement requires soldering. Observe the connection assignment and load limits given in the operating instructions.
On order, lead time to be confirmed
The LED headlight set includes six warm white LEDs (5 mm) with a pre-assembled cable to equip a locomotive model (e.g. PIKO) on both sides with triple headlights.
On order, lead time to be confirmed
The tail light set contains 4 red LEDs (5 mm) including a pre-assembled cable to equip a locomotive model (e.g. PIKO) on both sides with two red tail lights.
On order, lead time to be confirmed
This set contains 4 warm white LED spots that can be placed individually in any locomotive or wagon model.
On order, lead time to be confirmed
Following the great demand for the Christmas tree for Gauge G (5 cm), a Christmas tree (2 cm) is also being released for smaller gauges, e.g. H0. It is also suitable for Gauge G as a small Christmas tree. With nine orange LEDs, pre-configured for connection to AC, DC and DCC.
On order, lead time to be confirmed
Every garden railway enthusiast will be familiar with the steam locomotives that run before Christmas, particularly on the Saxon narrow-gauge railways, with an illuminated Christmas tree mounted on the front buffer beam or in front of the smoke box door. On the prototype, simple metal plates with a matching colour scheme and appropriate lighting elements are attached to the front buffer beam or in front of the smoke box door, thus creating a festive atmosphere in the snow-covered landscape.
On order, lead time to be confirmed
The MASSOTH Pendulum Automation 8142010 enables fully automatic shuttle operation between two terminal stations. The starting and braking times as well as the dwell time can be adjusted individually to ensure particularly realistic running. With a load capacity of up to 5 A, the module is also suitable for powerful locomotives and complete trains. The Pendulum Automation can be mounted protected in the LGB buffer stop 10310; the required fixing material and the insulating track connectors are included in the contents supplied. The product is intended exclusively for analogue operation with adjustable DC voltage and is not suitable for digital operation.
On order, lead time to be confirmed
DCC light decoder with four function outputs specifically designed for installation in RhB express coaches as a replacement for the analogue controls fitted as standard. All cables in the coach can be soldered to the pads on the underside. Two additional sockets allow connection of additional elements. A high-power voltage buffer is already fitted as standard. (Image shows development model)
On order, lead time to be confirmed
57mm loudspeaker, 3 Watt, HiFi
On order, lead time to be confirmed
Visaton K57FL loudspeaker, 57 mm diameter, 2 watts, 8 ohms
On order, lead time to be confirmed
70 mm loudspeaker, 2 W, 8 Ω
On order, lead time to be confirmed
Visaton speaker K40SQ, 40 x 40 mm, 1 watt, 8 ohm
On order, lead time to be confirmed
Visaton K28WP speaker, 28 mm diameter, 2 watts, 8 ohms
On order, lead time to be confirmed
Visaton speaker FRS 5, 50 mm diameter, 5 W, 8 Ω
On order, lead time to be confirmed