Spare Parts
SUSI connecting cable, red, 4-core (300mm)
On order, lead time to be confirmed
SUSI & FastUpdate programming cable, red (300 mm)
On order, lead time to be confirmed
DiMAX bus cable, 6-core (6 m)
On order, lead time to be confirmed
DiMAX bus cable, 6-core (2 m)
On order, lead time to be confirmed
DiMAX bus cable, 8-pole (2 m)
On order, lead time to be confirmed
Bus cable for connecting the DiMAX 1202B digital booster 8137501 to Märklin Central Station 2 and 3.
On order, lead time to be confirmed
DiMAX bus cable for booster, 4-pole (3 m)
On order, lead time to be confirmed
Connection plug for DiMAX Central Station/Booster (6-pin)
On order, lead time to be confirmed
When the onboard system was introduced at LGB in 2002, the connector system colloquially known as MiniCT came into use. From that point on, all components were made (with a few exceptions) with this connector system and installed in tens of thousands of models. The MiniCT system covers not only the onboard decoders but also the models referred to as Onboard-DCC with a decoder interface (e.g. for LGB 55027). Via the MiniCT connector system, components such as lighting, clock generators, reed contacts, loudspeakers, sockets, etc. are connected to the heart of the locomotive (decoder or interface board). To this day this connector system is used at LGB and of course also in the well-known Massoth components. As part of the development of the range, the item is now offered in a practical bag of 4 at a lower price. The cables are each 300mm (30cm) long.
On order, lead time to be confirmed
When the onboard system was introduced at LGB in 2002, the connector system colloquially known as MiniCT came into use. From that point on, all components were made (with a few exceptions) with this connector system and installed in tens of thousands of models. The MiniCT system covers not only the onboard decoders but also the models referred to as Onboard-DCC with a decoder interface (e.g. for LGB 55027). Via the MiniCT connector system, components such as lighting, clock generators, reed contacts, loudspeakers, sockets, etc. are connected to the heart of the locomotive (decoder or interface board). To this day this connector system is used at LGB and of course also in the well-known Massoth components. As part of the development of the range, the item is now offered in a practical bag of 4 at a lower price. The cables are each 300mm (30cm) long.
On order, lead time to be confirmed
When the onboard system was introduced at LGB in 2002, the connector system colloquially known as MiniCT came into use. From that point on, all components were made (with a few exceptions) with this connector system and installed in tens of thousands of models. The MiniCT system covers not only the onboard decoders but also the models referred to as Onboard-DCC with a decoder interface (e.g. for LGB 55027). Via the MiniCT connector system, components such as lighting, clock generators, reed contacts, loudspeakers, sockets, etc. are connected to the heart of the locomotive (decoder or interface board). To this day this connector system is used at LGB and of course also in the well-known Massoth components. As part of the development of the range, the item is now offered in a practical bag of 4 at a lower price. The cables are each 300mm (30cm) long. Packaging unit: 4/Pack
On order, lead time to be confirmed
Replacement rail contact brushes for most LGB locomotives from 1990 onwards. (4/pack)
On order, lead time to be confirmed
Pantograph carbon strips, 14 mm (8/pack)
On order, lead time to be confirmed
Pantograph carbon strips, 16 mm (8/pack)
On order, lead time to be confirmed
Replacement pickup shoes for LGB 2067 track-cleaning locomotive (2/pack)
On order, lead time to be confirmed
Replacement grinding pads for LGB 50050 track-cleaning machine (4/pack)
On order, lead time to be confirmed
Replacement grinding plate for LGB track cleaning machine 50040 (1/pack)
On order, lead time to be confirmed
With the universally applicable loudspeaker drilling template, there is now finally a precise tool that ends the often necessary but not always professionally looking "freehand drilling" of sound outlet holes when fitting a loudspeaker. The product, made from high-quality stainless steel, is fixed centrally in a hole drilled at the desired location using the supplied screw and wing nut. The symmetrical 4mm holes for the sound outlet, which fit all loudspeakers available from Massoth but also many other brands, can now be made cleanly. The four wings with the smaller 2.5mm holes also allow the holes for the fixing screws to be made in the correct position. To enable work in cramped spaces, the wings are partly provided with a break-off point (tool required, beware of sharp corners) for easy removal.
On order, lead time to be confirmed
There are changes in the classic spare parts range too: in 2021 we are replacing the previous red traction tyres 8315105 (Ø37.5mm) and 8315205 (Ø46.5mm), with 5 pieces each in the pack, with new, transparent traction tyres in original manufacturer quality, as fitted at the factory by garden railway manufacturers. The larger pack contains 8 pieces. The material is subject to colour variations. Traction tyres Ø37.5mm (8/Pack) compatible with LGB 69104, E126174
On order, lead time to be confirmed
There are changes in the classic spare parts range too: in 2021 we are replacing the previous red traction tyres 8315105 (Ø37.5mm) and 8315205 (Ø46.5mm), with 5 pieces each in the pack, with new, transparent traction tyres in original manufacturer quality, as fitted at the factory by garden railway manufacturers. The larger pack contains 8 pieces. The material is subject to colour variations. Traction tyres Ø46.5mm (8/Pack) compatible with LGB 69184, E131368
On order, lead time to be confirmed
The fully synthetic special oil is 100% free of resin and acid and is excellently suited for the model railway sector. The 12 ml bottle with the 40 mm fine nozzle (drop oiler) reaches every corner of the garden railway model.
On order, lead time to be confirmed
The Massoth smoke and cleaning distillate has been specifically developed for use in model railway smoke generators, ensuring reliable and consistent smoke production. It is also ideal for the gentle cleaning of locomotives, coaches, track and other model railway components.
On order, lead time to be confirmed
With the MM1 contact paste (graphite grease) in the practical dosing tube, contact problems at the rail joints in indoor and outdoor layouts are a thing of the past.
On order, lead time to be confirmed
After replacing gear components and motors, the gears and bearings are lubricated with this grease, which is specifically designed for high temperatures and extreme pressure. It is also suitable for wagon axle bearings.
On order, lead time to be confirmed