The garden railway in G scale
LGB, Swiss metre-gauge trains in the garden
RhB Ge 4/4 II and Allegra, MGB HGe 4/4 II, MOB Pullman coaches: LGB models the Swiss mountain railways at 1:22.5, with models designed to run outdoors as well as indoors.
- 338items in the shop
- 1:22.5G scale
- Since 1968the garden railway

What LGB brings to your garden
- Swiss railways: RhB, MGB, FO and MOB: Ge 2/4, Ge 4/4 II, Ge 6/6, Allegra, Capricorn, panoramic coaches and container wagons.
- Made for the garden: models designed for outdoor as well as indoor use, on sturdy, weatherproof brass track.
- Sound and digital control: recent locomotives such as the RhB Ge 2/4 and Ge 4/4 II have an mfx/DCC decoder, many sound and light functions and digitally controlled pantographs.
- The whole layout: track and points in radii R1 to R5, power supplies, decoders, sound modules, smoke generators and spare parts.
The LGB families
The trains
50 itemsLocomotives and railcarsRhB Ge 2/4, Ge 4/4 II, Ge 6/6, Allegra and Capricorn, HGe 4/4 II, FZe 6/6.See the items
46 itemsPassenger coachesRhB main-line, panoramic, dining and saloon coaches, MOB Pullman coaches.See the items
32 itemsWagons and vansRhB coop and postal container wagons, tank wagons, open wagons and luggage vans.See the items
10 itemsStarter setsTo get started: Christmas train, construction, passenger or goods train.See the itemsThe layout
81 itemsTrack, points and signalsStraight and curved track R1 to R5, points, crossings, buffer stops and signals.See the items
47 itemsControl, sound and smokePower supplies, controllers, decoders, sound modules, smoke generators and lighting.See the items
46 itemsSpare partsWheelsets, bogies, couplings, skates, pantographs and motors.See the itemsAll LGB items
This two-conductor black/white cable is designed for the AC connections on your LGB layout and is colour-coded accordingly. Cross-section 1.5 mm2, length 15 m.
On order, shipped within 10-15 days
With this versatile control panel you can switch up to four electrical circuits on and off, e.g. electrically separated track blocks or street lamps. Each toggle switch operates one circuit. Depending on your needs, you can connect the control panel to DC or AC power by means of the plugs on the sides. An LED indicates when the control panel is being supplied with power. Colour-coded connections on the back make hooking it up easier. With stickers for marking the switch assignments. 126 x 116 x 66 mm. Replaces item 51800.
On order, shipped within 10-15 days
The distant signal informs the driver of the state of the following main signal. The electrically operated LGB signal is equipped with a moving signal disc and signal lamps that change colour to indicate "expect clear" (Vr1) and "expect stop" (Vr0). With an LGB signal drive for easy installation. For use with the LGB 51755 or similar. Height 230 mm.
On order, shipped within 10-15 days
This classic main signal can be found on many European railways. The electrically operated LGB signal is equipped with a moving semaphore arm and signal lamps that change colour to indicate "clear" (Hp1) and "stop" (Hp0). The mast is finely detailed and equipped with moving levers and counterweights. With an LGB signal drive. Easy assembly and wiring. For use with the LGB 51755 or similar. Height: 350 mm.
On order, shipped within 10-15 days
This two-arm signal is indispensable for controlling trains in stations. The fully functional model is equipped with two moving semaphore arms and signal lamps that change colour to indicate "slow" (Hp2) and "stop" (Hp0). The mast is finely detailed and equipped with moving levers and counterweights. With an LGB signal drive. Easy assembly and wiring. For use with the LGB 51755 or similar. Height 350 mm.
On order, shipped within 10-15 days
The Rhaetian Railway uses colour light signals, which take up less space along its narrow mountain lines. The electrically operated LGB signal is equipped with signal lamps that change from red to green and are mounted on a prototypical signal mast. With an LGB signal drive. Easy assembly and wiring. For use with the LGB 51755 or similar. Height: 240 mm.
On order, shipped within 10-15 days
These simple semaphore signals could be found in earlier times on many American railways. The prototypical model is equipped with an electrically operated semaphore arm and signal lamps that change colour to indicate "Go" and "Stop". With an LGB signal drive. Easy assembly and wiring. For use with the LGB 51755 or similar. Height: 220 mm.
On order, shipped within 10-15 days
The classic LGB control panel in the attendant's house now offers modern features, for example: max. 5 A running current / built-in rectifier, suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / for use indoors or outdoors / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 115 x 175 x 165 mm.
On order, shipped within 10-15 days
This controller is designed for special applications, e.g. for installation in track diagram control panels. With increased running current, while at the same time generating less waste heat than its predecessor. Features: max. 5 A running current / built-in rectifier / suitable for use with any LGB transformer (DC or AC) / SIC (Special Integrated Circuit) technology provides sensitive control and smoothed DC voltage / connections for cables with a cross-section of up to 1.5 mm2 / minimal waste heat / short-circuit protection / output: 0-24 V DC voltage / running current: max. 5 A / 100 x 80 x 90 mm.
On order, shipped within 10-15 days
Model Set consisting of four figures (workers) that can be used for varied decoration of railway facilities and other construction sites on the layout. Note The illustration shows an example.
On order, shipped within 10-15 days
Display case with a roller test stand. The display case matches the Shay type US geared steam locomotive but is also suitable for other LGB models. 7 roller stands, individually movable. Interior height of the display case 24 cm above the roller stand. Roller test stand made of black anodised aluminium on a black acrylic base. The display case can be used with various digital or analogue LGB/Märklin control systems. Digital central unit or analogue controllers not included.
On order, shipped within 10-15 days
Connecting cable for connecting the MZS Power Booster to the Märklin CS2 to increase power.
On order, shipped within 10-15 days
Reversing loop module for the digital LGB system world. Switch the reversing loop on your digital layout automatically and without short circuits. In doing so, you protect your digital system and of course your rolling stock. An additional advantage of the reversing loop module: several reversing loops can be used on the layout at the same time. Conventional reversing loop modules generate a short circuit when the train enters and, by means of a voltage dip, force the polarity of the track to be reversed, e.g. the 55080. The MZS reversing loop module, by contrast, switches without short circuits; an interruption of the voltage on the track is prevented. Overloading of the MZS central unit by the deliberately generated short circuit is thus a thing of the past. Above all, this protects track components such as locomotive decoders, point decoders and the electronics usually installed in locomotives and wagons. Compatible with the previous components. Notes: Suitable to a limited extent for analogue operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm.
On order, shipped within 10-15 days
Model Adapter board for plugging the new 55029 large-scale decoder into the Märklin 60971 decoder programmer. Easy connection to a PC/laptop. In addition, the Märklin Decoder Tool software is required, which can be conveniently downloaded from the Märklin homepage (www.maerklin.de under Service/Downloads/Nachrüstdecoder/mLD3/mSD3). It can be used to easily transfer existing or self-recorded sounds; other settings such as maximum speed, braking behaviour, etc. can also be programmed very easily and quickly with it. Note The Märklin 60971 decoder programmer is also required. It is not included.
On order, shipped within 10-15 days
Model Energy storage unit for connection to the 55029 large-scale decoder or the identical decoders in almost all LGB locomotives built from 2018. Equipped with this energy storage unit, locomotives can cross small sections without power with no problem. It simply plugs into the decoder. Size 36 mm x 24 mm x 23 mm, cable length 200 mm. Highlights For bridging short sections without power
On order, shipped within 10-15 days
With this point decoder, the control commands for up to four LGB solenoid accessories can be transmitted easily via the tracks. Power is drawn directly from the track, which avoids long, complicated wiring. This point decoder is thus ideal for controlling points and signals out on the line or at more distant locations on your LGB layout. Features: four control outputs / adjustable mode for each output: normal (for points and signals), synchronous blinking (for lamps), asynchronous blinking (for lamps), on/off (for lamps and accessories) / adjustable switching duration for normal, synchronous and asynchronous. Suitable for the CS 2 and CS 3 as well as MZS III. The DCC, mfx and MM formats are supported.
On order, shipped within 10-15 days
This interface adapter makes it possible to install the new 27-pin 55029 decoder in earlier MZS vehicles with the old 10-pin interface.
On order, shipped within 10-15 days
These sturdy brass wires are used with the "Standard" and "Modell" catenary systems. The wires have a grooved profile. Length: 680 mm. Can be shortened as required.
On order, shipped within 10-15 days
These plastic clamps allow you to make an insulated connection between two LGB 56201 catenary wires.
On order, shipped within 10-15 days
These brass catenary wire clamps are used to make an electrically conductive connection between two LGB 56201 catenary wires.
On order, shipped within 10-15 days
A reproduction of a modern catenary mast of the Swiss railways. On this model the catenary wire is suspended from a supporting cable. The prototypical mast is made of aluminium and is equipped with two booms, one for the catenary wire and one for the supporting cable. The catenary wire is mounted 225 mm above the top of the rails. The catenary mast base (LGB 56302) or the pivoting catenary mast base (LGB 56303) can be used to set up the mast.
On order, shipped within 10-15 days
This catenary mast base allows you to connect the catenary mast (LGB 56301) and the standard catenary mast (LGB 56405) securely to your LGB tracks. On the catenary mast base there is an adjustable bar (5.5-30 mm) for mounting on the tracks. The catenary masts are inserted into the catenary mast.
On order, shipped within 10-15 days
Similar in design to the catenary mast base (LGB 56302), this one can also pivot. It allows you to set up catenary masts on lines with gradients of up to 25%. Recommended for steep lines and rack railways.
On order, shipped within 10-15 days
Catenary cross-span assemblies are ideal for use wherever several tracks lie next to each other and are to be spanned with catenary wire. A maximum of 5 tracks can be spanned with the catenary cross-span assembly. Length: 1,000 mm, can be shortened as required.
On order, shipped within 10-15 days