Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
Construction Site Theme World There is a lot to do at the construction site. Put on your hard hat and guide the crane car into position. Today many stones are needed for a new section of the large construction site. Extend the outriggers, because now you are the boss at the loading station. The empty loading box is already floating over on the crane to be filled. Rotating crane with a hand crank and magnet. Magnetic loading box for setting down and lifting up again. 4 sturdy outriggers for stability. Crane boom and outriggers can be folded in for travel. In addition to the loading box, the magnetic containers from the entire my world assortment can also be loaded. Together with the construction train (29341) you can load and transport all kinds of things. Load your construction cars and then off to the other side of your large construction site.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Ichqs-u 377 of the German Federal Railway (DB)/Interfrigo. Model For everything that has to stay cool. The Ichqs-u 377 refrigerator wagon of the German Federal Railway/Interfrigo. DC wheelset E700580 available separately. Highlights A Märklin classic for many years now Incidentally, you can also paint the wagon with your coloured pencils just the way you like it!
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Centre self-unloading hopper wagon. A centre self-unloader with a load of hard coal, as was often to be seen in local freight service in the 50s and 60s. Its advantage was the quick and inexpensive unloading of the hard coal at the small consignee. Model Size of the wagon 11.5 cm. DC wheelset E700580 available separately. Highlights The wagon and its load were to be seen so often Hard coal as a removable load Size of the wagon 11.5 cm Relex couplers for quick and easy coupling and uncoupling
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Type Kbs of the German Federal Railway (DB). Model Almost anything can be carried on this two-axle stake wagon of the type Kbs. Its low side walls and its 18 plug-in stakes allow the load to be secured well. Size of the wagon 11.5 cm. DC wheelset E700580 available separately. Highlights A true all-rounder for goods transport Size of the wagon 11.5 cm Relex couplers for quick and easy coupling and uncoupling
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Crane wagon of the Krupp-Ardelt type, crane protection wagon and equipment wagon of the Deutsche Bahn AG (DB Netz). Version as service vehicles of the railway fire brigade/emergency response service. Model Crane wagon with a rotating superstructure, a movable jib and a hand crank for the crane cable. Crane protection wagon with a jib support. Equipment wagon with a built-in mfx digital decoder and a power feed for sound functions that can be switched in sequence. All wagons with Relex couplers. Overall length over the buffers 32.5 cm. Highlights Robust models - ideally suited for children ages 6 and above Realistic fire brigade sounds: two-tone horn, alarm signal, emergency call radio message and operating sounds Many play possibilities around the fire brigade theme Note The wagon set goes with the "Feuerwehr" starter set 29752. This themed world can also be extended with the themed extension set 78752.
In stock: 3 on the shelf, shipped within 1-3 days
Highlights Wagon in a unique design as the superhero Green Lantern Illuminated wagon lantern Includes Green Lantern figure
In stock: 3 on the shelf, shipped within 1-3 days
Model Container car in the well-known banknote design of the AC/DC single Moneytalks from 1990. Relex couplers. Car length 11.5 cm. DC wheel set E700580 available separately. Highlights A reprint of the Moneytalks banknote is included with the car Reasonably priced supplement to the already released AC/DC models One-time series ©2026 Leidseplein Presse B.V. Under License to Perryscope Productions LLC Note You can find the matching locomotive under item number 39966 in the Märklin H0 assortment.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Set consisting of three four-axle Erz Id open self-unloading hopper cars, type OOtz 44, of the German Federal Railroad (DB). Version with a very low upper body and a brakeman's platform. Used to transport iron ore. Standard design pressed sheet metal trucks with a welded-in underframe beam for reinforcement. Basic red-brown paint scheme. The cars look as they did starting in 1952. Model Detailed version with different car numbers. All cars with a brakeman's platform and a brake wheel on the end. Loaded with load inserts of real iron ore in a scale grain size. All cars individually packaged in an additional outer box. Length over the buffers 34.5 cm. DC wheel set E700580. Highlights Loaded with real iron ore
In stock: 3 on the shelf, shipped within 1-3 days
Prototype 5 two-axle goods wagons of different designs. 1 covered goods wagon J2d with a brake cabin of the BLS. 1 covered goods wagon J3 with a brake cabin of the SBB. 1 covered goods wagon Typo F "Spitzdach" of the FS. 1 tank wagon as a privately owned wagon of the firm ERPAG AG, Basel. 1 covered goods wagon G 10 "München" of the DB. All of the wagons look as they did at the end of the 1940s / the beginning of the 1950s. Model The covered goods wagons J2d, J3, and G10 have sliding doors that can be opened. The tank wagon has a separately applied brake platform and steps. All of the wagons are individually packaged and marked. With an additional outer box. Total length over the buffers 58.5 cm. DC wheelset E700580 for each wagon. Highlights Matching goods wagons for the new tooling of the Ae 6/8 electric locomotive. Era-appropriate wagon consist Note The matching Ae 6/8 electric locomotive can be found in the Märklin H0 assortment under item no. 38680.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: Open goods wagon of the Eaos type for the Swiss Federal Railways (SBB/CFF/FFS). Operating condition: The vehicle looks as it did around 1991.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Four-axle low-sided open wagon of the Res type of On Rail GmbH, Mettmann. European standard design with a length of 19.90 m. Version with steel side boards, folding stakes and square buffers. Golden yellow basic paint scheme. The wagon looks as it did starting in 2007. Model Specific version of the underbody. Many applied details such as folding stakes and handwheels for the parking brake. Y 25 type bogies. Wagon loaded with a ballast reproduction. Length over the buffers 22.9 cm. DC wheelset E700580. Highlights Wagon loaded with a "ballast" load insert Many separately applied details
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: 6-axle articulated double-pocket wagon, type Sdggmrss (T3000e), of Wascosa AG. Modern load-carrying wagon for intermodal freight transport. Basic paint scheme in light red orange. Version with four side folding locks. Operating condition starting in 2019. Loaded with four 20ft tank containers for the haulage company Bertschi.
In stock: 3 on the shelf, shipped within 1-3 days
Prototype: Two-axle sliding-roof wagon, type Tms 851. Private wagon of the company Fissler GmbH, Idar-Oberstein, registered with the Deutsche Bundesbahn (DB). Without brake cabin and without brake platform. The vehicle looks as it did around 1990.
In stock: 3 on the shelf, shipped within 1-3 days
Club members only (Märklin Insider)
Prototype Heavy-duty flat wagon of the SSym 46 type of the Deutsche Bundesbahn. Deep black basic paint scheme. The wagon looks as it did starting in the mid-1950s. Model Wagon made of metal. With steel slabs as load. Plug-in stakes are included. Length over the buffers 15.2 cm. DC wheelset E700580. Highlights With attractive load Wagon made of metal
In stock: 3 on the shelf, shipped within 1-3 days
Prototype Six-axle heavy-duty wagon, type Samms 710, of the Deutsche Bahn AG. Basic paint scheme in traffic red. The wagon looks as it did from 2021 on. Model Metal frame. Many separately applied details. Three-axle special bogies. With a separately applied handwheel for the parking brake. Prepared for being driven on by Viessmann CarMotion vehicles. Stakes and folded-up bridging flaps are included as separate plug-in parts. Length over the buffers 18.9 cm. DC wheelset E700580. Highlights Prepared for being driven on by Viessmann Car Motion vehicles Metal frame Many applied details
In stock: 3 on the shelf, shipped within 1-3 days
With electromagnetic drive. Crossing angle 30°. Curve corresponds to 5100. Length of the straight tracks 193 mm. Additional hand control lever. Illuminated lantern with changing signal aspects. 3 connecting cables.
In stock: 3 on the shelf, shipped within 1-3 days
Changes from red (Hp0) to green (Hp1). Lighting by means of LEDs. 16 volt operating voltage. The signal is supplied without a drive. Either the universal remote switch (7244 or 72441) or the m 84 decoder (60842) can be used as the drive.
In stock: 3 on the shelf, shipped within 1-3 days
Connection adapter, for example for connecting loads such as lights to a switched-mode power supply with a 4-pin high-current mini-DIN plug.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin locomotives with a built-in universal / field coil motor. The märklin LokDecoder Allstrom supports the mfx, MM1, MM2 and DCC digital formats. Particularly powerful function outputs for old Telex couplers, light bulbs and smoke generators. The classic unregulated running characteristics under different load conditions are retained on the "Old- und Youngtimer" locomotives retrofitted with this decoder.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder mSD3 has a soldered-on wiring harness. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. A plug for NEM-652 interfaces, to be soldered on yourself, is included. Preset sound of a steam locomotive.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a soldered-on wiring harness with an 8-pin NEM interface plug, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of an electric locomotive.
In stock: 3 on the shelf, shipped within 1-3 days
Made of welded steel wire. Prefabricated unit for crossings and double slip points with a crossing angle of 22.5° (e.g. 2259, 2260) and 24.3° (e.g. 24624, 24640). Length 140.2 mm. 1 piece.
In stock: 3 on the shelf, shipped within 1-3 days
Model The Märklin 7102 cable (brown) is the ideal solution for clean and reliable wiring of your model railway layout. With a length of 10 metres, a 0.19 mm² cross-section and single-core construction, it is perfectly suited to common return leads, accessories or lighting – universally usable for all gauges. Single-core. Brown. 10 m. Cross-section 0.19 mm². Highlights 10 m connecting cable in brown, single-core, 0.19 mm² cross-section Universally usable for all gauges and systems (analogue & digital) Ideal for common return leads as well as accessories, points and lighting Flexible and long-lasting insulation for easy laying even on complex layouts Clear colour coding for tidy and safe wiring
In stock: 3 on the shelf, shipped within 1-3 days
3-pole cable for the connection between the 74492 point motor and the 72752 control panel from the Start up range. Length: 1.80 m.
In stock: 3 on the shelf, shipped within 1-3 days
