Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
Prototype: Tms 851 type wagon with sliding roof and brake cabin, equipped with a hand brake, as a privately owned wagon of the Christmas Railway (WB).
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Four-axle open self-unloading hopper wagon of the Fad 155 type (former OOtz 41 / Erz IIId) with Christmas design as a privately owned wagon of the Weihnachtsbahn (WB). Model Detailed version with brake platform and handwheel at the end. With "gold nuggets" as load insert. Length over the buffers approx. 11.5 cm. DC wheelset E700580. Highlights The special gift idea for Christmas Model with Christmas design Loaded with "gold nuggets" One-time series One-time series.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype 3 four-axle open side-tipping wagons, type Fas, of DB Schenker Rail Polska S.A., with ribbed side walls and transition platforms. Basic paint scheme in traffic red. The wagons look as they did around 2016. Model Type Y 25 bogies. The bodies can be tipped to both sides. Version with ribbed side walls. Movable compressed air cylinders and pneumatic rams. All of the wagons have different running numbers and are each packaged individually. Additional outer packaging. Overall length over the buffers 42 cm. DC wheelset E700580 per wagon. Note The matching class 370 electric locomotive of PKP Cargo can be found under item no. 39336 in the Märklin H0 range.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: gas tank wagon from GATX, registered in Germany.
In stock: 1 on the shelf, shipped within 1-3 days
Model: Tim Tender service coach. Coach in special livery with motifs from the world of the Märklin Start up Club. To complete the set, the coach includes a guard’s whistle. Relex couplings. Length over the buffers 11.0 cm. DC wheelset 2 x 700600. Model of the year for members of the Märklin Start up Club and Märklin Insider. One-time series.
In stock: 1 on the shelf, shipped within 1-3 days
Club members only (Märklin Insider)
Prototype: Two-axle beer refrigerated van of the Tehs 50 design. Private goods wagon of the Adlerbrauerei Rettenberg Herbert Zötler KG. Registered with the Deutsche Bundesbahn (DB). Krupp Mustang lorry as a beer lorry, with a stepped dropside of the Adlerbrauerei Rettenberg Herbert Zötler KG. The vehicle looks as it did around 1959.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Two-axle goods wagon with smooth side walls. Model Length over the buffers 13.9 cm. DC wheelset E700580. One-time series One-time series.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Two-axle goods wagon with smooth side walls. Model Length over the buffers 13.9 cm. DC wheelset E700580. One-time series One-time series. Note TM & © 1971 - 2025 The Smiley Company
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Two-axle goods wagon with smooth side walls. Model Length over the buffers 13.9 cm. DC wheelset E700580. One-time series One-time series. Note TM & © 1971 - 2026 The Smiley Company
In stock: 1 on the shelf, shipped within 1-3 days
Prototype: Two-axle container flat wagon for medium containers. Private goods wagon, Belgium, with yellow container of the Albemarle Corp. Registered with the SNCB. Operating condition, Era V around 2001.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Permanent way wagon as a workshop wagon of the German Federal Railway (DB), based on the type Dm 902. Basic ocean blue paint scheme in the condition of the early 1980s. Model It has an mfx digital decoder. A whole series of different sound functions such as electric welding with flickering light and an angle grinder, sawing metal, hammering, angle grinding, a grinding wheel, the Typhon warning signal, and compressor sound can be controlled digitally with the 6021 (the first 4 sounds) as well as with the Mobile Station or Central Station. In addition, a red tail lamp on the right and on the left end of the wagon can each be turned on and off separately in digital operation. A set of figures with 5 track workers is also included with the workshop wagon. Length over the buffers 28.2 cm. Highlights With sound functions for electric welding, sawing, hammering, angle grinding, a grinding wheel, compressor sound, and the Typhon warning signal Red tail lamps on both sides, each can be controlled digitally One-time series The 49965 permanent way wagon is being produced exclusively for Insider members with 20 years of membership. Note This offer is exclusively for Insider Club members with 20 years of membership in the Insider Club.
In stock: 1 on the shelf, shipped within 1-3 days
Club members only (Märklin Insider)
Prototype Electric locomotive Ce 6/8 III of the SBB CFF FFS in a dark brown colour scheme, in the operating condition of Era II. Running number 14311. Model Chassis with main frame and locomotive body of die-cast zinc. Many separately applied centrifugally cast brass parts. The locomotive has an mfx digital decoder with up to 32 functions, a built-in power buffer, a regulated high-performance motor and extensive sound functions such as operating sounds, blowers, a locomotive whistle, multiple station stop announcements, station announcements, background sounds at the station and much more. It can be operated with AC power, DC power, Märklin Digital and DCC. High-efficiency motors with all axles powered. The scissors-type pantographs can be raised and lowered by motor in digital operation. White LED headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. White LED lighting in the cabs, dependent on the direction of travel. The engine room lighting can be controlled. Swiss lighting changeover in red and white, the wrong-line signal at the front can be controlled separately. Cab doors that open, interior details, cab with a built-in locomotive driver figure. Metal handrails and many other separately applied details such as: plates, windscreen wipers, a whistle and much more. Buffer beams with sprung buffers and separately applied brake lines. A remote-controlled Telex coupler fitted as standard at the rear, a screw coupler at the front. Each can be exchanged for the other coupler type (included in the contents supplied). The minimum radius for operation is 1,020 mm. Length over the buffers 62.6 cm. Weight 6.5 kg. Highlights Completely new development in die-cast zinc with separately applied centrifugally cast brass parts Highly detailed professional model Scissors-type pantographs that can be raised and lowered by motor in digital operation Telex coupler at the front and rear that can be controlled digitally Extremely extensive sound equipment Power buffer Swiss lighting changeover in red and white Wrong-line signal that can be controlled Screw couplers for the front and rear included in the contents supplied Note Can be used in the 59960 and 59961 display case with functions.
- Digital
- Sound
In stock: 1 on the shelf, shipped within 1-3 days
For connecting a switched-mode power supply 66361 and up to 2 Mobile Stations (60657 or 60653/Trix 66955 or 66950). Suitable for the gauges Märklin H0, Trix H0 and Minitrix. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Distributor for connecting up to a maximum of 5 MS II units to one output of the 60112 or 60114 or the 60113 or 60116 digital connector box. One MS II hub can be connected to each output of the connector box. This allows up to a maximum of 10 MS II units to be operated on the 60112 or 60114 or the 60113 or 60116 connector box. The current consumption of one MS II is approx. 50 mA. Dimensions 96 x 85 x 40 mm. This distributor cannot be connected to the CS2 and CS3/CS3+! To connect several MS II units to the CS2 or CS3/CS3+, please use items 60125/60145 and 60124.
In stock: 1 on the shelf, shipped within 1-3 days
Connection for additional devices from the Digital range to the Central Station. Fixed 9-pin connection cable, 60 cm long (can be extended with 60126) and 9-pin socket for another Terminal or other devices on the main line. 4 sockets 7-pin for connection of Mobile Station (Adapter cable 60124 required) or other peripheral devices. Dimensions 96 x 85 x 40 mm. The successor product is the Terminal 60145.
In stock: 1 on the shelf, shipped within 1-3 days
Inverter for the switched-mode power supplies 66360/66361 or 60041/60061, for converting the DC voltage into an AC voltage or for connecting DC-compatible accessories. The AC voltage can be used for solenoid accessories that have to be switched with alternating current, for level crossings, and to supply controllers that only work with AC voltage (such as the 6021, 6015, 6017). The DC voltage can be used, for example, to supply the layout lighting or correspondingly DC-compatible accessories or controllers. There is therefore a barrel socket on the front (for the 66360) and a 4-pin high-current mini-DIN plug (for the 60041), and on the back one DC socket and one AC socket. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Connection facility for additional units from the Digital range to the Central Station. Fixed 9-pin connecting cable, 60 cm long (can be extended with the 60126), and a 9-pin socket for another Terminal or other units on the main line. 4 sockets with 7 pins for connecting a Mobile Station (adapter cable 60124 required) or other peripheral units. Dimensions 96 x 85 x 40 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Switched-mode power supply for connecting or supplying the Central Station 60216, 60226 as well as 60214/60215 and the Booster 60175 and 60174. Input 220 to 240 V. Output switchable 15/75 W (only Minitrix Japan and Australia), 19 V/100 W or 22 V/110 W DC voltage. Connection: 4-pin high-current mini-DIN plug. Recommended for Gauge 1 and LGB indoor. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Switched-mode power supply recommended for Gauge 1 or LGB indoor.
In stock: 1 on the shelf, shipped within 1-3 days
Model Power amplifier for digitally controlled large layouts. Multi-protocol capable in conjunction with the Central Station 60216, 60226 as well as 60213-60215. Connected by means of a 7-pin data bus lead directly to the Central Station 60216, 60226 as well as 60213-60215. Several Boosters can be used in one system by means of the Terminals 60125/60145. Automatic registration on the Central Station 60216, 60226 as well as 60213-60215. Status display by means of an LED on the Booster and graphically in the display of the Central Station. When the switched-mode power supply 60041 is used, the result is a maximum output of 58 VA and a maximum current of 3 A (with the 60216, 60226 or 60215 with the switched-mode power supply 60101 the result is a maximum current of 5 A, recommended exclusively for Gauge 1. Please be sure to note that the cable cross-section must be greater than 0.5 mm²!). Dimensions 150 x 110 x 42 mm. Note The Booster 60175 is intended only for operation in conjunction with the Central Station 60216, 60226 as well as 60213-60215.
In stock: 1 on the shelf, shipped within 1-3 days
Central unit with a built-in controller. It supplies the layout with power and control commands. The built-in controller has the same range of functions as the Control 80 f. Connection terminals for the transformer and track. 1 connection socket for a booster (item no. 6017). Operating indicator via LED. Output current max. 2.5 A. Dimensions 135 x 120 x 80 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype As a multi-protocol controller with its high-resolution, modern colour touchscreen, its two throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. A switched-mode power supply is not included in the contents supplied. Model As a multi-protocol controller with its high-resolution, modern colour touchscreen, its 2 throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. Up to 32 functions can be controlled on locomotives; with accessory items up to 320 Motorola or 2048 DCC solenoid accessories are possible. The Central Station 3 plus also has 2 built-in locomotive card readers (for storing the locomotive data on a locomotive card or for quickly calling up the locomotive by inserting the locomotive card), an SD card slot for expanding the memory, and an integrated speaker for playing sounds typical of model railways. A powerful Booster is integrated to supply the layout with power for running and switching. The Central Station 3 plus can be used with several units, i.e. with the optional cable (60123) several Central Station 3 plus units (60216), each with a network connection, can be operated together on one layout. Additional driver's desks, other layouts, and keyboards extend the operation of the layout, whereby shared and separate configurations for the layout areas to be controlled can be held in the Central Station 3 plus. The Central Station 3 plus has an integrated s88 connection, 2 built-in USB hosts (for a mouse, keyboard, or USB stick, for example), a USB charging socket, a network connection for communicating with a PC, connections for 2 Mobile Stations, a connection for external speakers, and others for the Märklin bus system. Load capacity at the feeder track: max. 5 A, load capacity at the programming track: max. 1.2 A. Max. outputs: - 5.0 A when using a Märklin 100W switched-mode power supply, exclusively with Gauge 1 and LGB. - 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. Please be sure to note that the cable cross-section must be greater than 0.5 mm². A switched-mode power supply is not included in the contents supplied. Dimensions 320 x 195 x 80 mm. Highlights Digital multi-protocol controller (mfx, mfx+, DCC, Motorola) High-resolution, modern colour touchscreen Integrated, central track diagram control panel Housing with a central stop button and 2 rotary controllers in robust industrial quality Up to 32 controllable locomotive functions. 2 built-in locomotive card readers Integrated speaker Built-in SD card slot Integrated powerful Booster Output: 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. Output: 5.0 A when using a Märklin 100W switched-mode power supply exclusively with Gauge 1 and LGB. Up to 320 Motorola and 2048 DCC solenoid accessories can be controlled Route control (incl. shuttle train control). 2 USB hosts for a mouse, keyboard, USB stick, etc. and 1 USB charging socket Direct connection for 2 Mobile Stations and one bus expansion unit Integrated s88 connection Connections for a network, external speakers, and the Märklin bus, for example Expansions can be connected by means of the Märklin bus Can be used with several units with the Central Station 3 plus You can find further technical information => in our instructions. You can find free information and updates here
In stock: 1 on the shelf, shipped within 1-3 days
Model Gleisplanung software on a USB stick for Märklin, Trix, and LGB model railway layouts. New version 12.0. Many useful planning tools for creating the layout you want quickly and easily, up to 15 x 15 m in up to 99 levels. Quick selection of the track sections and the accessories from tables, automatic connecting of the track ends and laying of parallel tracks. Calculation of gradients and clearance heights. Variable representation of the track. Library with symbols for many building shapes. Additional option of displaying wiring diagrams and layout substructures. Practical print formats for viewing and further processing the track plan. Automatic output of the parts list. 3D view for showing the layout and the substructure. System requirements: Windows® 10 and higher. A free USB-A slot. VGA graphics card. 128 MB of memory (RAM). Note: The Märklin "Gleisplanung 2D/3D" software is available in German only. Highlights Latest version 12.0. 2D/3D Gleisplanung. Märklin H0/1/Z, LGB, Trix H0, and Minitrix Including 25 selected 3D models. Including a track plan library
In stock: 1 on the shelf, shipped within 1-3 days
Note: To connect the Mobile Station, the connection box 60112 or 60114 (gauge 1) or 60113 or 60116 (H0) is required. Highlights Simple, convenient operation. Backlit graphic display with self-explanatory pictograms. 16 switchable additional functions. 320 solenoid accessories can be switched. Integrated locomotive card reader. Simple wiring (Plug & Play) to the Gleisbox and the Central Station. Integrated Märklin Digital locomotive database. Product description Digital handheld controller unit. 11 locomotives can be controlled by direct access. Locomotives are selected from the integrated Märklin Digital locomotive database or via digital addresses. 16 locomotive functions and 320 solenoid accessories can be switched. Automatic display of the function states on the integrated, backlit black-and-white full graphic display by means of self-explanatory pictograms for mfx locomotives or when selecting a locomotive from the integrated digital locomotive database. Integrated locomotive card reader. Red illuminated Stop button. 1.9 A power supply in the optionally available Gleisbox (60112 or 60114 / 60113 or 60116). Direct connection of 2 Mobile Stations (60653 or 60657) to one Gleisbox (60112/60114 or 60113/60116), which then work together in master-slave mode. By using MS II Hubs (60122), the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 and 60213-60215), the Central Station settings can be used (complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations). Driving and controlling vehicles in the motorola, mfx and DCC formats, switching solenoid accessories in the motorola and DCC formats. Dimensions 160 x 100 x 39 mm.
In stock: 1 on the shelf, shipped within 1-3 days
Prototype Note: A CS2 or a CS3/CS3+ with a WLAN connection or the WLAN receiver box 60117 is required as a receiver for the MS WLAN. Model Digital handheld controller unit. 40 locomotives can be controlled with direct access. Automatic registration of mfx locomotives. Integrated locomotive database for selecting older Märklin/Trix/LGB locomotives. Manual registration of MM and DCC locomotives by means of digital addresses is possible. Up to 32 locomotive functions can be controlled, with a display of the function statuses. Self-explanatory function pictograms with mfx and database locomotives. Up to 320 solenoid accessories can be controlled. Can be operated with one hand thanks to the grip (Pop Socket) included on the back. The display content rotates to match the position of the unit. Illuminated stop button to signal the stop status. Backlit b/w full graphics display. Dimensions 160 x 100 x 42 mm. Wireless coupling with a WLAN receiver box (60117) or with a CS2 as well as a CS3/CS3+ (60216, 60226 as well as 60213–60215), if the latter is part of a WLAN-capable network. When coupled with a CS, the Mobile Station WLAN can access its complete locomotive list and the solenoid accessories with the addresses 1 to 320. Up to four MS WLAN units can be coupled to one WLAN receiver box (item no. 60117). Either 4 AAA batteries or corresponding rechargeable batteries can be used to operate the unit. However, these are not included in the contents supplied. Available exclusively in the countries of the European Union, USA, Canada, CH, UK, Japan, Australia, and New Zealand. Highlights Simple operation, familiar from the MS2, even without looking One-handed operation with the grip (Pop Socket) included on the back New tactile rotary controller for even more convenient handling Backlit graphics display with self-explanatory pictograms The display content rotates to match the position of the unit Simple connection to the WLAN receiver box or to a Central Station 2, 3 or 3 plus Up to 32 controllable auxiliary functions. 320 solenoid accessories can be controlled Integrated Märklin Digital locomotive database Can be used in the 2-rail and 3-rail area. … and of course all of the great features of the MS2 Note Operate the layout wirelessly with one hand with the Mobile Station WLAN!
In stock: 1 on the shelf, shipped within 1-3 days
