Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
For the 43581-43586 coaches. Consisting of a power feed, a circuit board with 10 light bulbs, and a current-conducting close coupler.
On order, shipped within 10-15 days
For the models of the TEE/IC observation coaches such as those in the 26727 train and in the 42995 coach set. Only suitable for coaches from year of construction 2002 on. Consisting of a power feed, 2 lamp bases, 2 light bulbs, and a connecting cable. The light guide is already present in the coaches.
On order, shipped within 10-15 days
For the 4035, 4038, 4039, 4107, and 4108 coaches. Consisting of a power feed with a lamp socket and a light bulb.
On order, shipped within 10-15 days
For the 4131, 4132, and 4133 coaches. Consisting of a power feed, an adjustable lighting strip, 2 lamp sockets, and 2 light bulbs.
On order, shipped within 10-15 days
Model Power feed for the 73300 interior lighting for "Donnerbüchsen" with the 4315 basis (baggage coach). With a pickup shoe and a return spring. Mounting hardware is included. Note This product was created in cooperation with the firm Viessmann Modelltechnik GmbH.
On order, shipped within 10-15 days
For the 42101, 42131, 4214, 42141, 42142, and 4229 coaches. Consisting of a power feed, a lighting strip, a lamp socket, and a light bulb.
On order, shipped within 10-15 days
Same as 7330, but for shorter express coaches. For the 41351, 41361, 42383, and 42751 coaches.
On order, shipped within 10-15 days
Universal circuit board with two red LEDs, suitable for the UIC-x and TEE coaches of the new generation in the Märklin H0 programme (coach length 28.2 cm). 2 fixed connecting cables.
On order, shipped within 10-15 days
Model Special circuit board with two red LEDs, suitable for the local service coaches of the new generation in the Märklin H0 programme (coach length 28.2 cm). 2 fixed connecting cables. Highlights Retrofittable LED tail lamp for the new "Silberlinge"
On order, shipped within 10-15 days
Model Electronics for radio interference suppression for C tracks, with connecting cables in red and brown as well as flat plugs. One is required in each of the conventional and digital circuits. Designed for a maximum load current of 2 A. Recommended for the Mobile Station and analogue controllers. Note The FCC interference suppression set is only required in the USA!
On order, shipped within 10-15 days
Model Electronics for radio interference suppression with a screw terminal connection. One is required in each of the conventional and digital circuits. Designed for a maximum load current of 5 A. Recommended for the Central Station and analogue controllers up to 5 A output current. Note The FCC interference suppression set is only required in the USA!
On order, shipped within 10-15 days
Replacement base for line masts. Can be cut to length to suit all common H0 track systems with or without a ballast bed. With a matching screw for mounting. Pack of 20 pieces.
Content: 20 pc. (CHF 0.70 / 1 pc.)
On order, shipped within 10-15 days
Model Simple ground signal without a mast for use in shunting and station areas. Change from Sh0 (red/red) to Sh1 (yellow/yellow). Control of the traction current by means of the 72751 control panel. Maintenance-free LEDs. Height without the base approx. 10 mm. Matching control panel 72751. The 74371 signal cannot be controlled with other control panels! Highlights Ground signal for use in shunting and station areas Height without the base approx. 1 cm The 72751 control panel is required for control Note Can also be used in digital operation with the m84 decoder (60841).
On order, shipped within 10-15 days
Length 180 mm. Width 64 mm. For holding straight C tracks. 2 ramp sections correspond to the 24188 + 24172 tracks.
On order, shipped within 10-15 days
Model DB standard design, 23 m. Suitable for conventional and digital operation. Remote-controlled turntable bridge with a built-in motor. Digital control exclusively with the Mobile Station 2 and the Central Station 2 and 3 (not included). Particularly convenient control with the Central Station 2 and 3 by means of track pre-selection or with various digital central units using the DCC digital format. Function: turning right/left. Pit for recessed installation in the layout. 6 track connections for C tracks, to be fitted at any position. Exit angle in the 12° C track grid. Can be used with the 24922 transition track to K track and with the 24951 transition track to M track. Can be expanded to a maximum of 30 track connections in a 12° grid with the 74871 extension. A separate power supply for the exit tracks is required. Outside diameter with one exit track opposite another 378 mm. Diameter of the pit without exit tracks 278 mm. Bridge length 263 mm. Matches the 72887 roundhouse. Various sound functions that can be controlled. Turntable operator's cabin and outside lamp lit with LEDs, can be controlled. New colour scheme compared to the previous 74861 turntable, e.g. "blanking plugs" in the colour scheme of the C track with the wood planks additionally represented. Highlights Sound Operator's cabin with LED lighting
On order, shipped within 10-15 days
Model Single-track level crossing with half barriers, fully pre-assembled. For direct connection to C tracks. 2 electromagnetically operated barriers, each with 2 red warning lamps that light up when the barrier is closed. Ready for connection, easy to install. Contact track set: 3 straight tracks, each 94.2 mm. Size of each base 137 x 95 mm. Highlights The level crossing is fully assembled and contains 2 contact tracks You only have to plug in your tracks and off you go
On order, shipped within 10-15 days
Improved version of the 7549 point motor. Suitable for the 2265 and 2266 points (new version), 22715 and 22716, of the 2275 double slip point as well as for the KOMBI extension programme. Automatic cut-off at the end of travel. Automatic feedback possible with the 72710 control panel. Below-baseboard mounting with the 7548 fitting kit.
On order, shipped within 10-15 days
Prototype Ground signal in the standard design of the German Federal Railway (DB). Dwarf signal without a mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. Plug contact on the narrow foot of the signal head. Signal head with small sun visors. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 10.0 mm. Highlights Ground signal for use in the shunting area Signal head on a prototypically narrow stand Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Ground signal in the standard design of the German Federal Railway (DB). High signal with a tubular mast. 2 aspects: "Stop, no movement permitted" - red/red (Sh0) and "Movement permitted" - white/white (Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control. Height without the base 50.0 mm. Highlights Ground signal for use in the shunting area Prototypically thin tubular mast Sh1 aspect correctly with 2 white lights
On order, shipped within 10-15 days
Prototype Exit signal in the standard design of the German Federal Railway (DB). 4 aspects: "Stop" - red/red (Hp00), "Clear" - green (Hp1) and "Slow speed" - green/yellow (Hp2) as well as "Stop for trains, shunting permitted" - red/white/white (Hp0/Sh1). Model With integrated signal electronics and 1 separate signal decoder. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the address can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 distant signal. Height without the base 78 mm. Highlights Exit signal for use in stations Matching distant signal separately as item no. 76480 and 76481 or on the entry signal item no. 76497 Integrated ground signal with a white light
On order, shipped within 10-15 days
Prototype Block signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 2 aspects as with item no. 76491. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Block signal for use on the line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Exit signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 4 aspects as with item no. 76494. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Exit signal for use at the end of a station or at the entrance to the main line Distant signal for use ahead of a block signal or an entry signal
On order, shipped within 10-15 days
Prototype Entry signal with a distant signal in the standard design of the German Federal Railway (DB) on the same signal mast. Main signal with 3 aspects as with item no. 76493. Distant signal with 3 aspects as with item no. 76480 / 76481. Model With 2 integrated signal electronics units and 1 separate signal decoder. The distant signal can be used for all main signals. All functions can be controlled with the associated signal decoder in the digital system or with the 72760 control panel on conventional layouts. The signal decoder can be installed under the C track or under the layout. For digital operation, the configuration and the addresses for both signals can be assigned and tested before installation. There are connections on the signal decoder for train control and for 1 additional distant signal. Height without the base 78.0 mm. Highlights 2 signals on one mast without an additional connection Entry signal for use ahead of stations Distant signal for use ahead of an exit signal
On order, shipped within 10-15 days
Model For servicing and displaying locomotives with up to 8 driving and coupled axles. Also suitable for the "Big Boy". 8 adjustable pairs of roller stands with precision ball bearings. The aluminium parts of the roller stands are black anodised. Construction and technical version as for 78150. Dimensions 520 x 42 x 30 mm. Highlights Attractive design in black
On order, shipped within 10-15 days
