Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
Suitable for straight and curved sections of line. Length 165 mm.
On order, shipped within 10-15 days
Adjustable in length from 150 to 180 mm.
On order, shipped within 10-15 days
For hooking into the tower masts. It spans 5 tracks. The span is approximately 123 mm.
On order, shipped within 10-15 days
These are required for creating isolating points in the catenary and at branches running over points.
On order, shipped within 10-15 days
Contains 2 screw terminals with cable and 3 without cable. For feeding power into catenary sections and for holding the pieces of contact wire together, for example over crossings.
Content: 5 pc. (CHF 1.72 / 1 pc.)
On order, shipped within 10-15 days
Z gauge display case with an internal length of 120 mm. All parts made of transparent acrylic glass. With a high-quality, dustproof acrylic glass cover. 2 milled wheelset grooves in the base for Z gauge wheelset width. Internal dimensions of the display case L120 mm x H45 mm x W39 mm. External dimensions L126 mm x H51 mm x W45 mm.
On order, shipped within 10-15 days
2 positions: "Stop" (Hp0) and "Proceed" (Hp1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
3 positions: "Stop" (Hp0), "Proceed" (Hp1) and "Slow speed" (Hp2). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
4 positions: "Stop" (Hp00), "Proceed" (Hp1), "Slow speed" (Hp2) and "Train stop, shunting permitted" (Hp00/Sh1). LED lighting. Height 34 mm.
On order, shipped within 10-15 days
2 positions: "Stop, movement prohibited" (Sh0), "Movement prohibition lifted" (Sh1). Warm white/red LED lighting. Height 7 mm.
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Proceed" (Hp1). Single arm, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
Model 2 positions: "Stop" (Hp0) and "Slow speed" (Hp2). 2 coupled arms, with LED lighting and a below-baseboard drive permanently connected to the signal. Height 48 mm. Installation depth 65 mm, drill hole diameter 13 mm. Highlights Below-baseboard drive Slow arm movement
On order, shipped within 10-15 days
With 2 single-pole switches and one changeover switch for different circuits. A wide variety of tasks can be assigned to the universal remote switch (up to 3 functions at the same time), which it carries out automatically. Operating voltage 10 V. Twin-coil drive. It is operated by a circuit track, the 7272/72720 control panel or a manual switch lever. Width 30 mm. Length 70 mm. Height 8 mm.
On order, lead time to be confirmed
With 2 single-pole switches and 1 changeover switch, for example for controlling the light change in the 8939 signal and the track power. Width 30 mm. Length 70 mm. Height 8 mm.
On order, shipped within 10-15 days
Lighting base for buildings
On order, shipped within 10-15 days
With a 10 V light bulb. For use in the 8950 lighting base, the 8939 signal (old version) and 8940, the 8992 level crossing, in all locomotives that can be lighted and in models of ICE intermediate cars (exception: lighting with maintenance-free LEDs).
On order, shipped within 10-15 days
Prototype Jagstzell station. The municipality of Jagstzell with its station is located in the Ostalbkreis district in Baden-Württemberg on the Crailsheim - Ellwangen line. Model Very delicate, extremely detailed lasered model with a precise fit and numerous details. Model frame, interior area and body made of architectural card. Fine sandstone engraving as well as shutters with engraving. Doors, bargeboards with wood decoration and window glazing are included in the contents supplied. The kit is prepared for reproducing different stations; the corresponding signs (Jagstheim, Schwabsberg) are included in the contents supplied. Detailed assembly instructions are included in the contents supplied. Dimensions of the model with the small annex: L x W x H approximately 80 mm x 50 mm x 52 mm. Highlights Suitable for many eras (I-VI) Delicate, detailed model Different stations can be reproduced
On order, shipped within 10-15 days
Length 220 mm.
On order, shipped within 10-15 days
Prototype Flood relief bridge, green steel look. Model Kit for a single-track flood relief bridge in a steel look. With abutments, without piers. The card kit made of high-quality architectural card is precisely laser-cut, with a reproduction of the rivets on the gusset plates on the longitudinal and cross girders and a footway with plank engraving. The kit can be assembled with commercially available adhesives. Dimensions: L 110 mm x W 27 mm x H 27 mm. Highlights Extremely fine engraving
On order, shipped within 10-15 days
Length 110 mm.
On order, shipped within 10-15 days
Radius 145 mm. Track curve 45°.
On order, shipped within 10-15 days
Contains 10 piers. Height 4, 8, 12, 16, 20, 24, 28, 32, 36 and 40 mm.
On order, shipped within 10-15 days
Contains 5 piers. Height 40 mm.
Content: 5 pc. (CHF 2.18 / 1 pc.)
On order, shipped within 10-15 days
Model 2 x 3-road roundhouse (dimensions each: width at the rear 200 mm, width at the front 100, long sides 140 mm, height approx. 50 mm), which can be converted into a 6-road engine shed, or can extend 89982 to a 9-road or 12-road engine shed. The card kits are precisely laser-cut from high-quality architectural card and can be assembled with commercially available adhesives. 6 isolating tracks for stopping the locomotives automatically are also included. Highlights Architectural card model cut precisely with the laser Isolating tracks in the contents supplied
On order, shipped within 10-15 days
