Digital and electronics
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder mLD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for retrofitting analogue and digital locomotives. The märklin LokDecoder mLD3 supports the mfx, MM1, MM2 and DCC digital formats.
In stock, shipped within 1-3 days
H0 retrofit decoder set (60760)
In stock, shipped within 1-3 days
Model Feedback module for contact devices on digitally controlled layouts. Can be plugged into the L88 (60883) with the connecting cable included. Connection socket for another s 88 decoder (60881). 16 inputs for contact devices. The L88 (60883) is required for connection to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock, shipped within 1-3 days
Adapter cable 10-pin to 7-pin for connecting the Mobile Station 60653, the Mobile Station 60652 and the Trix Mobile Station 66950 to the 60125/60145 Terminal and a 3rd Mobile Station to the Central Station 60213-60215. Furthermore, for connecting a second Mobile Station 60652 to the 24088 feeder track or to the connector box 60115 (H0) or 60111 (Märklin 1).
In stock, shipped within 1-3 days
Extension cable for the main line with a 9-pin socket and a 9-pin plug for connecting a remotely located 60125/60145 Terminal. Length approx. 2 m.
In stock, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder3 has a soldered-on wiring harness with an eight-pin NEM interface plug already fitted, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin LokDecoder3 supports the mfx, MM1, MM2 and DCC digital formats.
In stock, shipped within 1-3 days
Model Receiver for controlling points, signals and uncoupling tracks. The m 83 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 83 has 8 outputs, each of which can be controlled separately or in pairs. The default setting is for controlling up to 4 points. Other functions include switching up to 8 lights (dimmable) with a defined switch-on behaviour (e.g. street lighting, building lighting). An external power feed, e.g. by means of the 66360, can be implemented, only in conjunction with the 60822. The m 83 and m 84 decoders can be connected in any sequence. One 60821 accessory set is required per pair of outputs for motorised drives. The connections are made by means of lift terminals. The maximum current-carrying capacity is 3A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days
Model Receiver for switching continuous current on and off for lighting, motors, Hobby colour light signals (74371, 74380, 74391) and other electrical accessories. The m 84 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 84 contains 8 relays in 4 electrically isolated groups for switching loads. By using a 66360 power supply, the bistable state of the relays and the storage of the switch setting can be implemented. 4 Hobby colour light signals and 4 Hobby distant signals can be controlled, with the option of switching the track current at the same time. The m 84 also contains 8 inputs for switching the relays manually (similar to the 7244 remote switch). The m 83 and m 84 decoders can be connected in any sequence. The connections are made by means of lift terminals. The maximum current-carrying capacity per group is 5A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days
Model Feedback module with current sensors for layouts with a two-rail supply. Can be plugged into the L 88 (60883) with the connecting cable included. Connection socket for another s88 DC decoder (60882). 2x 8 inputs for current sensors (with optocouplers) in 2 different circuits can be combined into one circuit with 16 inputs. The L 88 (60883) is required for connecting s88 feedback units to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder mSD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a steam locomotive.
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a 21-pin interface and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a diesel locomotive.
In stock: 5 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder mLD3 has a soldered-on wiring harness. The märklin LokDecoder mLD3 supports the mfx, MM1, MM2 and DCC digital formats. A plug for NEM-652 interfaces, to be soldered on yourself, is included.
In stock: 5 on the shelf, shipped within 1-3 days
4 series circuit boards for motorised points for the m83 decoder. For using motorised point motors with cut-off at the end stop. Can only be used in conjunction with the m83 (60831/60832). When operated with the m83, the operating speed as well as a slow approach to the end position can be programmed.
In stock: 4 on the shelf, shipped within 1-3 days
Model Connection option for the s88 (60881) and s88 DC (60882) and the previous s88 feedback modules (6088 and 60880) to the Central Station II and Central Station 3 or to the 60145 Terminal. One previous connection socket for the 6088 and 60880 feedback modules as well as two RJ45 sockets for the new 60881 and 60882 feedback modules are available. In addition, there are 16 inputs for contact devices (common return detector as on the 60881). These 16 inputs can be configured specially for track diagram control panels, so that a matrix with up to 64 push buttons can be created. A 66360 or 60201 switched-mode power supply is required for operation. Highlights All connections with lift terminals
In stock: 4 on the shelf, shipped within 1-3 days
High-performance decoder for retrofitting Märklin H0 locomotives with a built-in 6090 high-performance drive to the new version with more functions. The electronics feature a total of 4 switchable functions. The "function" output is intended for lighting. The "f1" and "f2" outputs can be used for other switchable functions such as Telex coupling or smoke generator. The "f4" function allows the regulation to be switched off for easier shunting.
In stock: 4 on the shelf, shipped within 1-3 days
Circuit board with 2 buffer capacitors of 1 farad each for connection to the mLD3 and mSD3 with the item nos. 60972, 60975, 60976 and 60977. The buffer capacitor prevents, for example, flickering lights and sound dropouts caused by dirty track sections, for example.
In stock: 4 on the shelf, shipped within 1-3 days
Connection adapter, for example for connecting loads such as lights to a switched-mode power supply with a 4-pin high-current mini-DIN plug.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin locomotives with a built-in universal / field coil motor. The märklin LokDecoder Allstrom supports the mfx, MM1, MM2 and DCC digital formats. Particularly powerful function outputs for old Telex couplers, light bulbs and smoke generators. The classic unregulated running characteristics under different load conditions are retained on the "Old- und Youngtimer" locomotives retrofitted with this decoder.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder mSD3 has a soldered-on wiring harness. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. A plug for NEM-652 interfaces, to be soldered on yourself, is included. Preset sound of a steam locomotive.
In stock: 3 on the shelf, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a soldered-on wiring harness with an 8-pin NEM interface plug, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of an electric locomotive.
In stock: 3 on the shelf, shipped within 1-3 days
For connecting a 66360/66361 switched-mode power supply and up to 2 Mobile Stations (60657 or 60653). Dimensions 96 x 85 x 40 mm.
In stock: 2 on the shelf, shipped within 1-3 days
WLAN and infrared adapter for operation on the digital connector box (60114, 60116) or on a Central Station (60216, 60226 as well as 60213-60215). Makes it possible to link the MS WLAN (60667) or the Start-Up infrared controllers. Simultaneous operation of up to four MS WLAN (item 60667) on one WLAN receiver box 60117. Simple configuration via a web application or the Central Station. Dimensions 96 x 85 x 40 mm. Available exclusively in the countries of the European Union, the USA, Canada, CH, UK, Japan, Australia and New Zealand.
In stock: 2 on the shelf, shipped within 1-3 days
Connecting cable for connecting the Central Stations 60213-60215 or 60216 and 60226 directly to one another and for connection to the 60125/60145 Terminal. Length approx. 2 m.
In stock: 2 on the shelf, shipped within 1-3 days
Universal supply unit k 83/m 83/m 84 for supplying the decoders k 83, m 83, and m 84 with the switched-mode power supplies 66361/66360/66365/66367. The universal supply unit is required once for each group of accessory decoders (the maximum power consumption is to be noted!).
In stock: 2 on the shelf, shipped within 1-3 days