Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Digital and electronics

Filter products
11% off the recommended price
Adapter Cable
Märklin 60884 Scale H0
Adapter Cable

Model Adapter cable for connecting the new 60881 S88 module directly to the CS II (60212 to 60215), the 6043 Memory and the 6050/6051 Interface. Note The current S88 feedback modules can be integrated perfectly into the previous S88 feedback system with this adapter cable.

Selling price: CHF 22.90 RRP CHF 25.99

In stock: 2 on the shelf, shipped within 1-3 days

13% off the recommended price
Digital S88        Extension
Märklin 6089 Scale H0
Digital S88 Extension

Extended connecting cable for the 6088 and 60880 decoders. Length 200 cm.

Selling price: CHF 26.90 RRP CHF 30.99

In stock: 2 on the shelf, shipped within 1-3 days

Pickup Shoe Changeover Circuit Board
Märklin 60973 Scale H0
Pickup Shoe Changeover Circuit Board

Circuit board for retrofitting motive power units with two pickup shoes, which makes it possible to pick up current alternately at the leading pickup shoe in the direction of travel. This ensures that an ICE, for example, also comes to a stop in good time in the stopping section. An mLD3 or mSD3 is also required.

Selling price: CHF 37.90 RRP CHF 41.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 SoundDecoderDiesel Locomotive Sounds
Märklin 60978 Scale H0
Märklin mSD3 SoundDecoderDiesel Locomotive Sounds

For converting Märklin/Trix H0 Hobby locomotives of the 36 series. The märklin SoundDecoder mSD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for bogie locomotives of the 36 series. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a diesel locomotive (Herkules).

Selling price: CHF 107.00 RRP CHF 125.00

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 SoundDecoderElectric Locomotive Sounds
Märklin 60979 Scale H0
Märklin mSD3 SoundDecoderElectric Locomotive Sounds

For converting Märklin/Trix H0 Hobby locomotives of the 36 series. The märklin SoundDecoder3 has a 21-pin interface and a matching interface board for bogie locomotives of the 36 series. The märklin SoundDecoder3 supports the mfx, MM 1, MM2 and DCC digital formats. Preset sound of an electric locomotive (TRAXX).

Selling price: CHF 107.00 RRP CHF 125.00

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 SoundDecoderNEM 652 Diesel Locomotive Sounds
Märklin 60986 Scale H0
Märklin mSD3 SoundDecoderNEM 652 Diesel Locomotive Sounds

For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a soldered-on wiring harness with an 8-pin NEM interface plug, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a diesel locomotive.

Selling price: CHF 107.00 RRP CHF 125.00

In stock: 2 on the shelf, shipped within 1-3 days

12% off the recommended price
36 VA Switched Mode Power Pack, 230 Volts
Märklin 66360 Scale H0
36 VA Switched Mode Power Pack, 230 Volts

Switched-mode power supply for connecting to or supplying the 60114 or 60116 track box. Input 230 V/50 Hz / output 18 V/36 W DC voltage. For use from 8 years of age. Dimensions 85 x 55 x 75 mm. Connection: DC plug: 5.5/2.5 mm. The 66360 switched-mode power supply is intended for use in dry rooms.

Selling price: CHF 60.90 RRP CHF 69.99

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
230 Volt Safety Transformer. 32 VA
Märklin 66471 Scale H0
230 Volt Safety Transformer. 32 VA

Model Track voltage adjustable between 4 and 16 V. Lighting voltage 16 V. Plastic housing. Dimensions 120 x 140 x 80 mm. On/off switch on the mains cable. VDE approved. The 32 VA safety transformer is suitable only for enclosed rooms. Note Tested safety. We guarantee the flawless operation of our trains only with original Märklin transformers. The transformers must be protected against moisture and are not approved for outdoor operation. Connect to AC only. Please also observe the operating instructions for the units. Multi-train operation with separate circuits. If several trains are to be operated independently of one another in conventional running, the layout is divided into several circuits. A transformer and at least one feeder track are assigned to each circuit, which is simply separated electrically from the other circuits by a centre conductor insulation (74030, 5022 or 7522). In the Märklin H0 system the rails are at the same potential everywhere and do not have to be interrupted. Circuits can be closed routes such as most main lines, but also other track sections with independent operation. Branch lines, station areas, sidings, shunting areas or locomotive depots lend themselves to this. This also makes it possible to control additional locomotives individually at the same time as fully automatic operation on the line. The catenary of electrified sections of line is as a rule also connected to its own transformer as an additional circuit in each case. This even allows the locomotives used in catenary operation to be controlled independently of the vehicles supplied via the centre conductor. Several catenary circuits are to be separated by the 7022 insulating contact wire section. Power consumption of locomotives and accessories. The output power indicated on the transformer (in VA) is available for the power consumption of all loads in the circuit. Here are some sample calculations: under load, smaller locomotives (e.g. tank locomotive 30001 or similar) require about 9 VA, larger locomotives (e.g. diesel locomotive 33803) about 12 VA. The power consumption of the train lighting depends on the light bulbs installed and is usually below 2 VA per coach. After deducting the power required at the track, the remaining reserve of the transformer can be used at the lighting output for electrical accessories. Here light bulbs consume between 0.5 and 1 VA (see the table "Light bulbs for accessories") and point or signal motors about 6 VA when switching. Further electrical accessories are to be connected to additional lighting transformers. The 66471 safety transformer is not a children's toy.

Selling price: CHF 136.00 RRP CHF 159.00

In stock: 2 on the shelf, shipped within 1-3 days

14% off the recommended price
Z Power Pack with 230 Volt Current Supply
Märklin 67013 Scale Z
Z Power Pack with 230 Volt Current Supply

Finely stepped speed control for smooth starting and powerful acceleration up to top speed. Single-knob operation for setting the track voltage and determining the direction of travel by turning the control knob out of the centre position. Dimensions of the controller 130 mm (L) x 70 mm (W) x 50 mm (H).

Selling price: CHF 110.00 RRP CHF 129.00

In stock: 2 on the shelf, shipped within 1-3 days

digital connection box
Märklin
digital connection box

For connecting a switched-mode power supply 66361 and up to 2 Mobile Stations (60657 or 60653/Trix 66955 or 66950). Suitable for the gauges Märklin H0, Trix H0 and Minitrix. Dimensions 96 x 85 x 40 mm.

Regular price: CHF 83.00

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
MS II Hub (Distributor)
Märklin 060122
MS II Hub (Distributor)

Distributor for connecting up to a maximum of 5 MS II units to one output of the 60112 or 60114 or the 60113 or 60116 digital connector box. One MS II hub can be connected to each output of the connector box. This allows up to a maximum of 10 MS II units to be operated on the 60112 or 60114 or the 60113 or 60116 connector box. The current consumption of one MS II is approx. 50 mA. Dimensions 96 x 85 x 40 mm. This distributor cannot be connected to the CS2 and CS3/CS3+! To connect several MS II units to the CS2 or CS3/CS3+, please use items 60125/60145 and 60124.

Selling price: CHF 60.90 RRP CHF 69.99

In stock: 1 on the shelf, shipped within 1-3 days

terminal
Märklin
terminal

Connection for additional devices from the Digital range to the Central Station. Fixed 9-pin connection cable, 60 cm long (can be extended with 60126) and 9-pin socket for another Terminal or other devices on the main line. 4 sockets 7-pin for connection of Mobile Station (Adapter cable 60124 required) or other peripheral devices. Dimensions 96 x 85 x 40 mm. The successor product is the Terminal 60145.

Regular price: CHF 52.00

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Converter
Märklin 60130 Scale H0
Converter

Inverter for the switched-mode power supplies 66360/66361 or 60041/60061, for converting the DC voltage into an AC voltage or for connecting DC-compatible accessories. The AC voltage can be used for solenoid accessories that have to be switched with alternating current, for level crossings, and to supply controllers that only work with AC voltage (such as the 6021, 6015, 6017). The DC voltage can be used, for example, to supply the layout lighting or correspondingly DC-compatible accessories or controllers. There is therefore a barrel socket on the front (for the 66360) and a 4-pin high-current mini-DIN plug (for the 60041), and on the back one DC socket and one AC socket. Dimensions 96 x 85 x 40 mm.

Selling price: CHF 68.90 RRP CHF 79.99

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Terminal
Märklin 60145 Scale H0
Terminal

Connection facility for additional units from the Digital range to the Central Station. Fixed 9-pin connecting cable, 60 cm long (can be extended with the 60126), and a 9-pin socket for another Terminal or other units on the main line. 4 sockets with 7 pins for connecting a Mobile Station (adapter cable 60124 required) or other peripheral units. Dimensions 96 x 85 x 40 mm.

Selling price: CHF 59.90 RRP CHF 69.99

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
110 VA, 220-240 Volt Switched Mode Power Pack, DE/EU
Märklin 60151 Scale 1
110 VA, 220-240 Volt Switched Mode Power Pack, DE/EU

Switched-mode power supply for connecting or supplying the Central Station 60216, 60226 as well as 60214/60215 and the Booster 60175 and 60174. Input 220 to 240 V. Output switchable 15/75 W (only Minitrix Japan and Australia), 19 V/100 W or 22 V/110 W DC voltage. Connection: 4-pin high-current mini-DIN plug. Recommended for Gauge 1 and LGB indoor. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Switched-mode power supply recommended for Gauge 1 or LGB indoor.

Selling price: CHF 132.00 RRP CHF 155.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Booster (Märklin Item)
Märklin 60175 Scale H0
Booster (Märklin Item)

Model Power amplifier for digitally controlled large layouts. Multi-protocol capable in conjunction with the Central Station 60216, 60226 as well as 60213-60215. Connected by means of a 7-pin data bus lead directly to the Central Station 60216, 60226 as well as 60213-60215. Several Boosters can be used in one system by means of the Terminals 60125/60145. Automatic registration on the Central Station 60216, 60226 as well as 60213-60215. Status display by means of an LED on the Booster and graphically in the display of the Central Station. When the switched-mode power supply 60041 is used, the result is a maximum output of 58 VA and a maximum current of 3 A (with the 60216, 60226 or 60215 with the switched-mode power supply 60101 the result is a maximum current of 5 A, recommended exclusively for Gauge 1. Please be sure to note that the cable cross-section must be greater than 0.5 mm²!). Dimensions 150 x 110 x 42 mm. Note The Booster 60175 is intended only for operation in conjunction with the Central Station 60216, 60226 as well as 60213-60215.

Selling price: CHF 212.00 RRP CHF 249.00

In stock: 1 on the shelf, shipped within 1-3 days

Control Unit.
Märklin
Control Unit.

Central unit with a built-in controller. It supplies the layout with power and control commands. The built-in controller has the same range of functions as the Control 80 f. Connection terminals for the transformer and track. 1 connection socket for a booster (item no. 6017). Operating indicator via LED. Output current max. 2.5 A. Dimensions 135 x 120 x 80 mm.

Regular price: CHF 65.00

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
CS 3 plus (Märklin Item)
Märklin 60216 Scale H0
CS 3 plus (Märklin Item)

Prototype As a multi-protocol controller with its high-resolution, modern colour touchscreen, its two throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. A switched-mode power supply is not included in the contents supplied. Model As a multi-protocol controller with its high-resolution, modern colour touchscreen, its 2 throttles, and its integrated central track diagram control panel, the Central Station 3 plus offers the possibility of controlling the locomotives and the entire layout simply and conveniently. Up to 32 functions can be controlled on locomotives; with accessory items up to 320 Motorola or 2048 DCC solenoid accessories are possible. The Central Station 3 plus also has 2 built-in locomotive card readers (for storing the locomotive data on a locomotive card or for quickly calling up the locomotive by inserting the locomotive card), an SD card slot for expanding the memory, and an integrated speaker for playing sounds typical of model railways. A powerful Booster is integrated to supply the layout with power for running and switching. The Central Station 3 plus can be used with several units, i.e. with the optional cable (60123) several Central Station 3 plus units (60216), each with a network connection, can be operated together on one layout. Additional driver's desks, other layouts, and keyboards extend the operation of the layout, whereby shared and separate configurations for the layout areas to be controlled can be held in the Central Station 3 plus. The Central Station 3 plus has an integrated s88 connection, 2 built-in USB hosts (for a mouse, keyboard, or USB stick, for example), a USB charging socket, a network connection for communicating with a PC, connections for 2 Mobile Stations, a connection for external speakers, and others for the Märklin bus system. Load capacity at the feeder track: max. 5 A, load capacity at the programming track: max. 1.2 A. Max. outputs: - 5.0 A when using a Märklin 100W switched-mode power supply, exclusively with Gauge 1 and LGB. - 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. The Central Station 3 plus is to be used only in conjunction with MÄRKLIN switched-mode power supplies. It is not compatible with MÄRKLIN transformers. Please be sure to note that the cable cross-section must be greater than 0.5 mm². A switched-mode power supply is not included in the contents supplied. Dimensions 320 x 195 x 80 mm. Highlights Digital multi-protocol controller (mfx, mfx+, DCC, Motorola) High-resolution, modern colour touchscreen Integrated, central track diagram control panel Housing with a central stop button and 2 rotary controllers in robust industrial quality Up to 32 controllable locomotive functions. 2 built-in locomotive card readers Integrated speaker Built-in SD card slot Integrated powerful Booster Output: 3.0 A when using a Märklin 60W/50W switched-mode power supply with H0 and N gauge. Output: 5.0 A when using a Märklin 100W switched-mode power supply exclusively with Gauge 1 and LGB. Up to 320 Motorola and 2048 DCC solenoid accessories can be controlled Route control (incl. shuttle train control). 2 USB hosts for a mouse, keyboard, USB stick, etc. and 1 USB charging socket Direct connection for 2 Mobile Stations and one bus expansion unit Integrated s88 connection Connections for a network, external speakers, and the Märklin bus, for example Expansions can be connected by means of the Märklin bus Can be used with several units with the Central Station 3 plus You can find further technical information => in our instructions. You can find free information and updates here

Selling price: CHF 746.00 RRP CHF 849.00

In stock: 1 on the shelf, shipped within 1-3 days

Mobile Station
Märklin
Mobile Station

Note: To connect the Mobile Station, the connection box 60112 or 60114 (gauge 1) or 60113 or 60116 (H0) is required. Highlights Simple, convenient operation. Backlit graphic display with self-explanatory pictograms. 16 switchable additional functions. 320 solenoid accessories can be switched. Integrated locomotive card reader. Simple wiring (Plug & Play) to the Gleisbox and the Central Station. Integrated Märklin Digital locomotive database. Product description Digital handheld controller unit. 11 locomotives can be controlled by direct access. Locomotives are selected from the integrated Märklin Digital locomotive database or via digital addresses. 16 locomotive functions and 320 solenoid accessories can be switched. Automatic display of the function states on the integrated, backlit black-and-white full graphic display by means of self-explanatory pictograms for mfx locomotives or when selecting a locomotive from the integrated digital locomotive database. Integrated locomotive card reader. Red illuminated Stop button. 1.9 A power supply in the optionally available Gleisbox (60112 or 60114 / 60113 or 60116). Direct connection of 2 Mobile Stations (60653 or 60657) to one Gleisbox (60112/60114 or 60113/60116), which then work together in master-slave mode. By using MS II Hubs (60122), the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 and 60213-60215), the Central Station settings can be used (complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations). Driving and controlling vehicles in the motorola, mfx and DCC formats, switching solenoid accessories in the motorola and DCC formats. Dimensions 160 x 100 x 39 mm.

Regular price: CHF 70.00

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Mobile Station WLAN
Märklin 60667 Scale H0
Mobile Station WLAN

Prototype Note: A CS2 or a CS3/CS3+ with a WLAN connection or the WLAN receiver box 60117 is required as a receiver for the MS WLAN. Model Digital handheld controller unit. 40 locomotives can be controlled with direct access. Automatic registration of mfx locomotives. Integrated locomotive database for selecting older Märklin/Trix/LGB locomotives. Manual registration of MM and DCC locomotives by means of digital addresses is possible. Up to 32 locomotive functions can be controlled, with a display of the function statuses. Self-explanatory function pictograms with mfx and database locomotives. Up to 320 solenoid accessories can be controlled. Can be operated with one hand thanks to the grip (Pop Socket) included on the back. The display content rotates to match the position of the unit. Illuminated stop button to signal the stop status. Backlit b/w full graphics display. Dimensions 160 x 100 x 42 mm. Wireless coupling with a WLAN receiver box (60117) or with a CS2 as well as a CS3/CS3+ (60216, 60226 as well as 60213–60215), if the latter is part of a WLAN-capable network. When coupled with a CS, the Mobile Station WLAN can access its complete locomotive list and the solenoid accessories with the addresses 1 to 320. Up to four MS WLAN units can be coupled to one WLAN receiver box (item no. 60117). Either 4 AAA batteries or corresponding rechargeable batteries can be used to operate the unit. However, these are not included in the contents supplied. Available exclusively in the countries of the European Union, USA, Canada, CH, UK, Japan, Australia, and New Zealand. Highlights Simple operation, familiar from the MS2, even without looking One-handed operation with the grip (Pop Socket) included on the back New tactile rotary controller for even more convenient handling Backlit graphics display with self-explanatory pictograms The display content rotates to match the position of the unit Simple connection to the WLAN receiver box or to a Central Station 2, 3 or 3 plus Up to 32 controllable auxiliary functions. 320 solenoid accessories can be controlled Integrated Märklin Digital locomotive database Can be used in the 2-rail and 3-rail area. … and of course all of the great features of the MS2 Note Operate the layout wirelessly with one hand with the Mobile Station WLAN!

Selling price: CHF 195.00 RRP CHF 229.00

In stock: 1 on the shelf, shipped within 1-3 days

Decoder k 83.
Märklin
Decoder k 83.

Receiver for switching points, signals or uncoupling tracks.

Regular price: CHF 18.00

In stock: 1 on the shelf, shipped within 1-3 days

Märklin sound decoder mSD.
Märklin
Märklin sound decoder mSD.

For converting Märklin/Trix H0 hobby locomotives of the 36 series. The Märklin sound decoder has a 21-pin interface and a matching interface board for bogie locomotives of the 36 series. The Märklin sound decoder supports the digital formats mfx, MM 1, MM2 and DCC. Preset sound of an electric locomotive (TRAXX).

Regular price: CHF 79.90

In stock: 1 on the shelf, shipped within 1-3 days

Märklin mSD sound decoder
Märklin
Märklin mSD sound decoder

For converting Märklin/Trix H0 locomotives with a built-in high-performance motor or other DC motors. The Märklin sound decoder has a soldered cable harness with an 8-pin NEM interface plug for retrofitting many locomotives with a corresponding NEM interface and locomotives with space constraints. The Märklin sound decoder supports the digital formats mfx, MM1, MM2 and DCC. Pre-set sound of a diesel locomotive.

Regular price: CHF 99.90

In stock: 1 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 PluX22 SoundDecoder
Märklin 60996 Scale H0
Märklin mSD3 PluX22 SoundDecoder

Model For retrofitting locomotives with a built-in PluX22 interface to NEM 658. The märklin SoundDecoder3 supports the mfx, MM1, MM2, DCC and RailCom® digital formats. Preset sound of a diesel locomotive. Highlights mfx/DCC/RailCom®-capable Full integration into the Märklin digital system Additional physical outputs Märklin's own mapping Note A Märklin 60970 decoder tester is required for programming.

Selling price: CHF 85.90 RRP CHF 99.99

In stock: 1 on the shelf, shipped within 1-3 days