Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Z21 and electronics

Filter products
10% off the recommended price
Connector
Roco 10602
Connector

Cable plugs. Adapters for connecting three single cables with flat connector system (10603).

Selling price: CHF 1.70 RRP CHF 1.90

In stock, shipped within 1-3 days

10% off the recommended price
Connector 3-pole, NEW
Roco 10603
Connector 3-pole, NEW

3-pole connector (e.g. for 10019, 10520, 10521, 10522, 10524, 10525, 10526, 10775, 10777). The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.

Selling price: CHF 1.70 RRP CHF 1.90

In stock, shipped within 1-3 days

12% off the recommended price
Plug-in power supply 230V
Roco 10723
Plug-in power supply 230V

Power supply plug. For accessory feed. Attention: Not suitable for z21/Z21!

Selling price: CHF 4.40 RRP CHF 5.00

In stock, shipped within 1-3 days

14% off the recommended price
Reed contact switch
Roco 61193 Scale H0
Reed contact switch

With fault clearance to avoid switching spikes and with buffer protection. With all geoLine tracks, this potential-free switch contact can be fitted in the places intended for it. Operated by magnet 42256. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

Selling price: CHF 9.90 RRP CHF 11.60

In stock, shipped within 1-3 days

12% off the recommended price
Decoder Plux22
Roco 10896 Scale H0
Decoder Plux22

Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual

Selling price: CHF 47.90 RRP CHF 54.90

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
Relay
Roco 10019
Relay

Universal relay with four change-over contacts. Current load per contact: max. 1.5 A. Contents: Relais 2 mounting screws 2 pieces connector (10603)

Selling price: CHF 25.90 RRP CHF 29.90

In stock: 2 on the shelf, shipped within 1-3 days

13% off the recommended price
Decoder Plux16
Roco 10895
Decoder Plux16

Suitable for Gauge H0 and TT. The decoder is equipped with the RailCom function. Maximum motor current: 1.0 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual

Selling price: CHF 38.90 RRP CHF 44.90

In stock: 2 on the shelf, shipped within 1-3 days

11% off the recommended price
Point control switch, no FB
Roco 10521
Point control switch, no FB

Change-over button for four solenoid-operated articles (turnouts, signals, relays) without automatic end-position switch-off. Without feedback.

Selling price: CHF 23.90 RRP CHF 26.90

In stock: 1 on the shelf, shipped within 1-3 days

11% off the recommended price
On/off switch 4 buttons
Roco 10524
On/off switch 4 buttons

Changeover switch. The switch is used wherever alternating switch-on connections are necessary (Lighting, Separate track sections). It is connected via the connector zone. Each individual switch is designed for maximum permissible current of 0.5 A.

Selling price: CHF 23.90 RRP CHF 26.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Connecting cable
Roco 10619
Connecting cable

Connecting cable for switches 10520, 10525, 10526 as track connecting cable for Digital amplifier 10764 and Digital booster 10765. Length 1.20 m

Selling price: CHF 9.50 RRP CHF 10.90

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Power distributor
Roco 10726
Power distributor

Power distributor. Necessary for connecting var. accessories (turnouts, light, signals, etc.) to the new transformers/switching power supplys. Input is a coaxial socket, outputs – via a luster terminal and four 3-pole connector zones (to our existing connection system 10603) and via a fixed cable with a coaxial connector to the control device or the digital device.

Selling price: CHF 18.90 RRP CHF 21.90

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
CAN Bus cabel
Roco 10753
CAN Bus cabel

CAN Bus cable. For connecting Z21 CAN devices.

Selling price: CHF 12.90 RRP CHF 14.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Amplifier/connect. cable
Roco 10757
Amplifier/connect. cable

Booster connection cable. Spare cable for connecting boosters (10765, 10789, 10805, 10806, 10807) with: Digital amplifier (10764) Digital central power unit (10820, 10822, z21) Break generator (10779) Connecting the boosters mentioned above with each

Selling price: CHF 13.90 RRP CHF 15.90

In stock: 1 on the shelf, shipped within 1-3 days

Reverse loop module
Roco
Reverse loop module

This device allows to operate track pieces such as terminal loops, triangular junctions and turntables even with the internationally standardised two-track - provided that it works on DCC-digital. Please note that the terminal loop module is designed exclusively for digital operation and does not work in analogue mode. The terminal loop function can be activated by: Closed circuit Make-and-break contacts replacement: 10797

Regular price: CHF 128.30

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
WiFi-MULTIMAUS
Roco 10813
WiFi-MULTIMAUS

Control unit with many operation functions. Several Z21 WLANMAUS can be simultaneously operated – possible with all Z21 systems (z21 start combined with WiFi Package) or if your own router is available with Art. no. 10818 – z21 activation code. The Z21 WLANMAUS gives you wireless freedom around your layout. Wireless freedom, 31 functions per locomotive (including headlights) Control of up to 9999 locomotives and 2048 turnouts 100 locomotive addresses can be stored in the database and can be assigned with names (up to 10 digits) Locomotive control with 14, 28 or 128 speed steps Writing and reading of CV values 1–1024 on your locomotive decoder Display with adjustable brightness Controller with center position Operated with commercially available standard batteries (3 x AAA, not included in the delivery) 5 SSID passwords: current password + the 4 last passwords 10 sets of points with 10-character names and 10 points each Firmware updateable Contents: Z21 WLANMAUS Manual

Selling price: CHF 113.00 RRP CHF 129.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Unlock Code
Roco 10818 Scale H0
Unlock Code

Unlock Code z21 The z21 activation code is required if you already have your own router. You can then use all the functions (see item no. 10814) of the z21 start including the start sets. Please note that extended network knowledge is necessary for this purpose. Follow this Link for Code activation Click HERE for more information! Info: system requirement is a Windows PC or notebook as well as an existing Internet connection. Please also note our video: Activation of the z21 start with the z21 WLAN package Please note that the unlock code cannot be delivered by e-mail!

Selling price: CHF 34.90 RRP CHF 39.90

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Z21 pro LINK
Roco 10838
Z21 pro LINK

Z21 pro LINK The configuring and networking of your Z21 hardware is getting even simpler and more convenient. In addition the Z21 pro Link also stands out thanks to easy operation and the ability to keep up to date with updates. Configuration and networking of your Z21 components at a new level: No complex CV tables With integrated web server Installed WiFi The 3 essential functions 1. Configuring The Z21 pro LINK always automatically detects which device it is currently connected to. You can conveniently configure this device via the installed display and buttons without the need of any other components. Or you carry out the necessary adjustments via the Z21 pro LINK website on your PC or smartphone. Thus you benefit from the larger screen. 2. Updating Always keep your Z21 system up to date and benefit permanently from all new functions. You can perform this easily with the Z21 Updater App for iOS and Android or via PC with the Z21 Maintenance Tool. 3. Controlling The Z21 pro LINK also networks all of your devices with zLink interface. It enables to perform communication with control commands and status queries directly via WiFi. Therewith the "Internet of Moba Things" has become reality. Package Contents: Z21 per LINK Z21 zLink cable

Selling price: CHF 77.90 RRP CHF 89.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Universal lighting kit LED gauge H0
Roco 4000005 Scale H0
Universal lighting kit LED gauge H0

LED interior lighting for H0 coaches. The light strip works with many different model railways, regardless of whether you are an analogue railroader (DC or AC) or run digitally (DCC/Motorola II). The integrated multi-protocol decoder enables special lighting effects and additional functions. Automatic detection and switching of operating modes Brightness adjustment optionally with potentiometer or CV setting Integrated constant current source for constant brightness from approx. 7 volts 8 integrated LEDs (warm white), 2 connections for additional LEDs Maximum driving voltage in digital mode: 21 volts Dimensions: 279.5 x 8 x 3.38 mm; can be shortened to 91 mm

Selling price: CHF 21.90 RRP CHF 24.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Lighting set,contr.cab.c.
Roco 40317 Scale H0
Lighting set,contr.cab.c.

Retrofit kit for interior lighting and headlights Interior lighting retrofit set and headlights (bulb) with direction of travel dependent light change for control cab coaches 44942/44959, (1:100). Replacement bulbs 16 volt: art. no. 93728 and art. no. 93517.

Selling price: CHF 18.90 RRP CHF 21.60

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Connecting bar 2pcs.
Roco 42613 Scale H0
Connecting bar 2pcs.

2-pole connecting cable with mounted rail clips for ROCO LINE tracks. Only suitable for intermediate feeds due to insufficient cable cross-section. Cannot be used as the main connection of the model railway system!

Selling price: CHF 6.00 RRP CHF 6.90

In stock: 1 on the shelf, shipped within 1-3 days

13% off the recommended price
Power feeder DC
Roco 61191 Scale H0
Power feeder DC

Feed-in power element for analogue DC operation. It can be connected to any straight or curved track element at the point designated from the factory. Not suitable for digital operation.

Selling price: CHF 6.00 RRP CHF 6.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price
Turnout decoder Geo-Line
Roco 61196 Scale H0
Turnout decoder Geo-Line

Turnout decoder geoLine. Suitable for the turnout drive 61195 of the geoLine track system. Accessible via turnout addresses 1 to 1024. Decoder characteristics can be changed via CVs. Easy assembling Simple operation Safeguarded against overheating and short-circuit fault NOTE: No longer accessible via locomotive addresses!

Selling price: CHF 28.90 RRP CHF 32.90

In stock: 1 on the shelf, shipped within 1-3 days

12% off the recommended price New
Z21 START newGen set
Roco 1000001
Z21 START newGen set

Z21 START newGen Basic Digital Set. The Z21 START newGen is an entry-level control unit offered at a particularly attractive price. Get started with the Z21 START newGen and a terminal device of your choice: Z21 APP, Z21 multiMAUS or Z21 WLANMAUS. Our other Z21 products are available for expanding your system – get started wirelessly straight away. The app is available for iOS devices in the App Store and for Android devices in the Google Play Store. Features: With built-in Wi-Fi, setting it up and connecting is a breeze! Controls up to 9,999 locomotive decoders Controls up to 100 locomotives simultaneously Controls up to 2,048 turnout decoders Software updates via the new Z21 Suite (further information to follow) Connections: X-BUS USB-C Technical details: Input voltage: 18–24 V Output voltage corresponds to 1 V below input voltage Output current: max. 3 A Analogue locomotives: Not controllable Maximum number of trains: 100 vehicles simultaneously DCC locomotive decoders 14/28/128 speed steps F0 to F31 Read & write POM Main track and programming track are on a single output on the Z21 START newGen, as is familiar from the Z21 START. Contents: 1 Z21 START newGen digital control unit 1 plug-in power supply RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 148.00 RRP CHF 169.90

Pre-order, ships on release

12% off the recommended price New
Package Z21 Profi Digiset+WLAN Maus newGen
Roco 1000020
Package Z21 Profi Digiset+WLAN Maus newGen

Z21 Professional Digital Set with Z21 WLANMAUS newGen. The Z21 digital control centre connects your model railway layout, your digital locomotives and your carriages via Wi-Fi to your tablet, smartphone or the Z21 WLANMAUS newGen. No additional networking knowledge is required for this. You can easily expand your Z21 digital control centre thanks to the wide range of interfaces. This also makes it the ideal basis for PC-based automation. Contents: 1 Z21 digital control centre 1 Z21 WLANMAUS newGen 1 Wi-Fi router 1 mains adapter

Selling price: CHF 522.00 RRP CHF 599.90

On order, shipped within 10-15 days