Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Z21 and electronics

Filter products
13% off the recommended price
Z21 switch decoder
Roco 10836
Z21 switch decoder

Z21 switch DECODER The Z21 switch DECODER is an universally applicable DCC switching decoder with a power output of 2 Amperes for up to 8 turnouts or up to 16 elements such as LEDs and bulbs. Simple connection A separate DC supply can be connected so that the control centre or booster outputs are not placed under unnecessary load. If the wiring should be as simple as possible, the rail signal can also be used as a supply. In addition, the outputs are protected against overload and short-circuits. Adjustable outputs Each of the 8 output pairs can be set to different modes independently of the other. These are already pre-configured and can simply be selected. Each output pair can also be individually dimmed so that lighting can be adapted precisely to requirements. It perfectly can be combined with twin coil motors simple light signals all kind of illumination the control of relays Highlights: 8 output pairs can be set independently Optional power supply via extra applied switching power supply Programmable with RailCom on the main track (POM) Short-circuit protection against overload Updateable Adjustable modes Standard operation - with configurable cut-in time for twin coil motors Instantaneous operation - for turnouts and uncouplers. Can be be activated with a manual controller depending on the operating time (see also 10775) Bistable continuous operation - Switching on or switching over of the lighting and signals Bistable continuous operation - Switching on or switching over with light bulb simulation Alternative flash Alternative flash with light bulb simulation Item numbers of switches 1-2040 RailCom is a registered trademark of the company Lenz Elektronik GmbH, Gießen.

Selling price: CHF 77.90 RRP CHF 89.90

On order, shipped within 10-15 days

12% off the recommended price
Switching power supply 36 Watts
Roco 10850
Switching power supply 36 Watts

Switching power supply 36 Watts Ideal for Z21 CAN HUB and z21 start. Protection against: Overload Short circuit Over-tension

Selling price: CHF 43.90 RRP CHF 49.90

On order, shipped within 10-15 days

13% off the recommended price
Switching powersupply 54VA
Roco 10851
Switching powersupply 54VA

Switching power supply 54 Watts. Ideal for Z21, z21, Z21 single BOOSTER, Z21 light BOOSTER. Protection against: Overload Short circuit Over-tension

Selling price: CHF 77.90 RRP CHF 89.90

On order, shipped within 10-15 days

13% off the recommended price
Switching power supply 120 Watt
Roco 10857
Switching power supply 120 Watt

Switching power supply 120 Watts. Ideal for Z21 dual BOOSTER and Z21 XL BOOSTER. Protection against: Overload Short circuit Over-tension Overtemperature

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

13% off the recommended price
USB switching power supply 5 Watts
Roco 10859
USB switching power supply 5 Watts

USB switching power supply 5 watts. With USB-A to Micro-USB-B cable. Ideal for Z21 pro LINK (item no.10838)

Selling price: CHF 25.90 RRP CHF 29.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 XL booster
Roco 10869
Z21 XL booster

Z21 XL BOOSTER The Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. The advantages of the Z21 XL BOOSTER Output voltage 6 A at 20 V Track format DCC and Motorola B-BUS CAN-BUS CDE interface RailCom receiver and transmission to control centre (CAN) Forwarding of short-circuits to control centre (adjustable) Firmware update (CAN) RailCom cut-out, adjustable Motorola is a registered trade name of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 287.00 RRP CHF 329.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 XL
Roco 10870
Z21 XL

Z21 XL Series The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters. The benefits at a glance More output voltage with 6 A at 20 V Control via WLAN provides high range and transmission security Convenient Z21 App and Z21 WLANMAUS for the control of your entire system Included: Z21 XL Series digital control centre Power supply unit and cable 6 A 20 V (10857) WLAN router & power supply unit

Selling price: CHF 608.00 RRP CHF 699.00

On order, shipped within 10-15 days

12% off the recommended price
Decoder 6-pin
Roco 10887
Decoder 6-pin

Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. Answers to possible questions can be found in this Zimo manual

Selling price: CHF 47.90 RRP CHF 54.90

On order, shipped within 10-15 days

Speaker Set
Roco 10889 Scale H0
Speaker Set

With this speaker set you can retrofit any sound. Complete set with sound box and connection cables. Ideally adapted to Zimo sound decoders. Dimensions: 10 x 15 x 9 mm Content: 2 pieces/package.

Selling price: CHF 11.90 RRP CHF 12.90

On order, shipped within 10-15 days

13% off the recommended price
Decoder 8-pin
Roco 10890 Scale H0
Decoder 8-pin

Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .

Selling price: CHF 99.90 RRP CHF 114.90

On order, shipped within 10-15 days

13% off the recommended price
Decoder Plux22
Roco 10891 Scale H0
Decoder Plux22

Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .

Selling price: CHF 99.90 RRP CHF 114.90

On order, shipped within 10-15 days

13% off the recommended price
Decoder 8-pin
Roco 10892 Scale H0
Decoder 8-pin

Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .

Selling price: CHF 113.00 RRP CHF 129.90

On order, shipped within 10-15 days

12% off the recommended price
Decoder Plux16
Roco 10893 Scale H0
Decoder Plux16

Suitable for Gauge H0 and TT. Decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .

Selling price: CHF 109.00 RRP CHF 124.90

On order, shipped within 10-15 days

12% off the recommended price
Decoder 8-pin
Roco 10894 Scale H0
Decoder 8-pin

Decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.0 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual

Selling price: CHF 43.90 RRP CHF 49.90

On order, shipped within 10-15 days

12% off the recommended price
Feeder cable H0e
Roco 32417 Scale H0e
Feeder cable H0e

H0e track connecting cable without radio suppression.

Selling price: CHF 4.70 RRP CHF 5.40

On order, shipped within 10-15 days

10% off the recommended price
Universal light.set 4axle
Roco 40360 Scale H0
Universal light.set 4axle

Universal lighting kit for 4-axled H0 wagons. Assembly kit: Contains a 300 mm flexible strip conductor, 5 bulb carriers, 5 bulbs 16 V/22 mA, 2 wheel current pick-up contacts, fastening material. Any number of bulb holders can be mounted in any position on the circuit board, which can be shortened to length. No soldering required. The set is also suitable, e. g. for illuminating station platforms.

Selling price: CHF 17.90 RRP CHF 19.90

On order, shipped within 10-15 days

10% off the recommended price
Universal light.set 3axle
Roco 40361 Scale H0
Universal light.set 3axle

Universal lighting kit for 2-3-axled H0 wagons. Assembly kit: Contains a 150 mm flexible strip conductor, 2 bulb carriers, 2 bulbs 16 V/22 mA, 4 wheel current pick-up contacts, fastening material. Any number of bulb holders can be mounted in any position on the circuit board, which can be shortened to length. No soldering required.

Selling price: CHF 17.90 RRP CHF 19.90

On order, shipped within 10-15 days

13% off the recommended price
Universal lighting kit LED
Roco 40420 Scale H0
Universal lighting kit LED

LED universal lighting kit for 4 axle H0 wagons. Universal lighting set for passenger wagon with a length from 170 up to 316 mm. For the operation of the Lighting set, it is necessary to use the base board with a length of 145 mm with the control electronics. The 6 LED modules with a warm white LED each can be optionally positioned on the carrier board so that an adaption to the interior is possible. The carrier board can be shortened from 296 mm to 250, 170 or 145 mm, nevertheless, the power supply from both sides is possible. It can be used in analogue as well as digital operation with AC or DC. With 16 pin PluX interface. The LED modules can be switched in groups in digital operation.

Selling price: CHF 25.90 RRP CHF 29.90

On order, shipped within 10-15 days

12% off the recommended price
Universal lighting kit LED gauge TT
Roco 4080001 Scale TT
Universal lighting kit LED gauge TT

LED interior lighting for TT coaches. The light strip works with many different model railways, regardless of whether you are an analogue (DC or AC) or digital (DCC/Motorola II) railway enthusiast. The integrated multiprotocol decoder enables special lighting effects and additional functions. Automatic detection and switching of operating modes Brightness adjustment optionally with potentiometer or CV setting Integrated constant current source for constant brightness from approx. 7 volts 6 integrated LEDs (warm white), 2 connections for additional LEDs Maximum driving voltage in digital mode: 21 volts Dimensions: 186 x 8 x 2.64 mm; can be shortened to 68 mm

Selling price: CHF 21.90 RRP CHF 24.90

On order, shipped within 10-15 days

12% off the recommended price
Track feed clip
Roco 4081710 Scale TT
Track feed clip

Connection terminal. Connection terminal for connection to straight track G121 or curved track R130. Note: There is an anti-interference capacitor in the junction box. It must be removed when using a digital control unit!

Selling price: CHF 4.30 RRP CHF 4.90

On order, shipped within 10-15 days

13% off the recommended price
Power feeder DCC
Roco 61190 Scale H0
Power feeder DCC

Feed-in power element for digital DCC operation. It can be connected to any straight or curved track element at the point designated from the factory.

Selling price: CHF 6.00 RRP CHF 6.90

On order, shipped within 10-15 days