Z21 and electronics
Z21 WLANMAUS newGen. The successor to the popular Z21 WLANMAUS is here – now with even more ease of use! The Z21 WLANMAUS newGen is a digital controller with which you can control your trains, use digital functions, switch points and signals, programme and much more. It gives you freedom of movement around your layout.
On order, lead time to be confirmed
Change over button with feedback function for four magnetic items switched off at the end (turnouts, semaphore signal, relays, etc.). Further switches can be plugged into the side.
On order, shipped within 10-15 days
Single action button for uncoupling tracks. Use this unit wherever power must be supplied for a short time. The individual buttons are electrically insulated and thus they can operate different power circuits.
On order, shipped within 10-15 days
Change over button with feedback. Change over button with feedback for single-slip turnouts and symmetric three-way turnouts. These two turnout designs require – if properly controlled – connections for the four possible turnout positions. The switch 10526 offers a definite control of the three permissible turnout settings. Additional switches can be connected side-by-side.
On order, shipped within 10-15 days
5-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
8-pole connector, e.g. for 10777. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
16-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.
On order, shipped within 10-15 days
3-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
5-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
8-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m
On order, shipped within 10-15 days
Highly flexible 6-pole spiral cable. Connection between Z21 multiMAUS (10835, 10810) and 10820, 10822, 10815, 10764. Suitable for the FLEISCHMANN multiMAUS from the digital Starter Sets.
On order, shipped within 10-15 days
4-pin data bus distributor module. To connect further input units (for example Lokmaus or Z21 multiMAUS). This distributor module can also be used as an extension of existing lines to units on the slave output. Note: The cable of the Master Lokmaus should not be extended in order to avoid impairing the quality of the data transmission.
On order, shipped within 10-15 days
Z21 multi LOOP The Z21 multi LOOP reverse loop module is ideal for the comfortable and safe operation of track layouts such as terminal loops, triangular junctions and turntables. Operation modes: short-circuit detection - easiest wiring sensor tracks - short circuit free detection switching contacts - detection via circuit tracks or reed contacts combined operation - double safety Compatible with DCC MM RailCom analogue mode Note on sensor tracks / sections! Since sensor tracks / sections are not themselves supplied with power, they must not be too long, especially with regard to short, slower locomotives. Ideally they should be between 4.0 and 5.5 cm long in H0 and 2.0 to 3.0 cm in N. RailCom is a registered trademark of the Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Train controller and plug-in power supply. This controller set is best suited for beginners and running just one train. It consists of one controller and plug-in power supply, designed to compliment each other. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. Easy connection to the layout using the pressure connection clips. Technical data: Running voltage: 0–14 V=/0.6 A Separate accessory output: 14 V=/0.85 A Automatic overload protection Regulator with zero point setting
On order, shipped within 10-15 days
Z21 CAN HUB Additional 2 A power supply for CAN BUS 3 CAN outputs 1 Z-CAN output with booster signal amplification Ideal for large track layouts with many CAN users The package also contains a connecting cable for CAN bus
On order, shipped within 10-15 days
Z21 light BOOSTER Power 3 A (track output) RailCom cutout (allows use of RailCom-track occupied detector) Terminal loop feature with short-circuit detector Connection via B bus (ideal also for multiZENTRALEpro), replaces Booster 10765 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 single BOOSTER Power 3 A (track output) Adjustable track voltage via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Configurable terminal loop feature with short-circuit detector Brake generator feature configurable Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Matching power supply: 10851 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 dual BOOSTER Power 2x 3 A (track outputs) Voltage can be set for both track outputs separately via app or PC via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Terminal loop feature can be separately configured by means of short-circuit detector Brake generator feature can separately configured for both Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 DETECTOR Track-occupied detector for 8 sections Occupied message by means of power monitoring of track sections RailCom-detector for loco identification when using the CAN bus Connection via CAN bus or R bus Configuration via button or CAN Occupied/feedback with momentary contact Includes connection cable for R-Bus/CAN RailCom is a registered trademark of Lenz Elektronik GmbH.
On order, shipped within 10-15 days
z21 WLAN Package The z21 start can be extended to a network-enabled control center by using Access Point and an activation code. You can easily control both trains as well as turnouts with your Smartphone or tablet via the popular Z21 App. Self-explanatory control functions for your model railway layout (through icons, image integration etc.) You can automate routes Control your locomotives with photorealistic driver’s cabs for the ultimate driving experience – feel like a real locomotive driver It lays the basis for PC guided automations (e.g. with Rocrail®, iTrain®, TrainController® etc. Click HERE for more information! The z21 WLAN Package contains a preconfigured router and the activation code for the z21 start. This way the z21 start can accept commands for locomotives and turnouts via the WiFi interface and process them. Go here for your: Unlock code Info: system requirement is a Windows PC or notebook as well as an existing Internet connection (only for activation of the Unlock code). Please also note our video: Activation of the z21 start with the z21 WLAN package Contents: WiFi Router Switching power supply Unlock code Manual
On order, shipped within 10-15 days
Z21 DETECTOR x16 Track occupancy sensor for 16 track sections Occupied signal is triggered by the power monitoring of the track sections Connection via R-Bus Configuration via buttons or POM CV programming
On order, shipped within 10-15 days
The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go! Activation code not required! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply 10851 pre-configured WiFi router for Plug & Play operations incl. switching power supply 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shope as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go ! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply with NEMA connector pre-configured WiFi router for Plug and Play operations incl. switching power supply with NEMA connector 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shop as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 multiMAUS Economically priced operating device with many possibilities. Several Z21 multiMAUS devices can be operated on the system at the same time. Brightness-adjustable display. Up to 9,999 locomotive addresses can be operated with direct input; 64 can be stored in a data bank and labeled with names: for example 103RB (103 red-beige). Per locomotive up to 31 functions (including headlights) can be activated if the model has been equipped accordingly. The locomotives can alternatively be operated with 14, 28 and 128 driving levels; on the one hand, this can be set in principle, on the other hand, it can be changed as required for each locomotive. With two different ways of programming you can adjust your locomotive decoder according to your own wishes: The most important CV values from 1 to 5 are accessible with the button combination “MENU” and 1–5, the total of 1024 possible CV values can be addressed with the programming menu. Of course, depending on the decoder configuration, all values up to 255 can be programmed. Readout of CV 1 - 1024 possible in connection with Z21 or readout capable digital control centre. Turnout mode: The Z21 multiMAUS can switch up to 2,048 magnetic devices. These elements have to be equipped with an electric device and be connected to a magnetic device decoder. The programming of the magnetic device decoder is done electronically via the tracks. Supported data transfer protocol: X-Bus 4.0 Slave Firmware updateable Contents: Z21 multiMAUS Connection cable Manual
On order, shipped within 10-15 days