Rolling Stock
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, lead time to be confirmed
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, lead time to be confirmed
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet was supplemented with an electrical railcar. The four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype Between 1855 and 1892, even private Swiss rail companies, the predecessors of the SBB, purchased 4- axle vestibule cars based on the “American system”. In 1902 when the Swiss state railway was founded, there were still about 300 of these cars which were then taken over. In addition to third class cars, the SBB also took over numerous mixed class cars of the 2nd and 3rd class category as well as luggage cars. Together with the four-axle passenger train coaches, luggage cars of a corresponding design were also purchased. These were also taken over by the SBB on nationalisation but disappeared from the stock much faster than the passenger coaches. However, due to their large storage space, they were extremely suitable as service cars and for stationary use as a store. In contrast to Germany, a four-axle coach of American type remained in Switzerland. The BC4 with the number 4952 was renovated and can be inspected today in the Swiss Transport Museum in Lucerne. Model Printed window frames Precise paintwork and painting NEM-standard short-coupling True to scale windows Tip bearing wheelsets True to scale side frames Completely lacquered wagon body Individually mounted steps
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype By 1977, the Halberstadt RAW (Reichsbahn repair shop) had produced over 3000 fouraxle Reko cars for the DR. Their body length was due to a concession to the RAWs structural conditions. By that time, these cars were out of date for commuter and local transport, and no longer suitable for premium service. Since the railcar industry in the DDR was fully occupied with export orders, Halberstadt RAW was the only shop available for the construction of the new car. Because the facilities there had been expanded by this time, the new vehicle could now fully exploit the UIC measure of 26.4 m. There was a prototype as early as 1973, and a second followed in 1975. Both were tested extensively in daily operations. The name „Langer Halberstädter“ was coined rather quickly in common parlance, making a connection with the famous sausages produced there. While the cars were still in construction, a request came from DR to make the car suitable for „premium international assignments“, which naturally led to changes in the design. A car was built with two entrances and three passenger compartments with a central corridor. At first glance, the Bmhe seems like a copy of the DB Silberling, but it was in fact a new version of the Bghwe car, with many new components. This is especially evident in the unladen weight, which is fairly high at 39 tons and not compatible with the „world class“ level so often aspired to in the DDR. The cars proved themselves in operation, and the passengers perceived them to be definite steps forward. In accordance with the requirements from the order, they were originally used almost exclusively in high-speed trains for national and international transport. They also achieved objectives in Czechoslovakia, Poland and West Germany. The cars that were delivered from 1982 onwards featured the new green and ivory-colored paint for express cars. Model Excellent running qualities with 3-point suspension Interior fittings in multicolour painting Free standing anti-roll support on bogie Coloring corresponding to the original Precisely inserted slidingwindows and printed window frames throughout Replicated airheating system in the car floor Precise replica of the „Görlitz V“ bogies NEM-standard short-coupling Passageway between coaches with separately mounted rubber beading
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days
Prototype As the EWI stood the test of time in an excellent manner, only a fEWItems had to be enhanced in its follow-up development towards EWII. In order to enable a low-floor design, the EWII received new bogies with a wheelbase of 2,500 mm and a wheel rolling circle diameter of only 800 mm. As the window line was accordingly lower as well, the coaches could clearly be identified in a train combination with EWI. The now double-glazed windows were also made of a single-piece and could be rolled down. While the first class coaches otherwise fully corresponded to their EWI counterparts, the second class coaches were one metre longer due to enlarged seat spacing. The seats had red leatherette upholstery in the smoking compartments and a green one in the non-smoking compartments; the walls were cladded with green imitation wood. From 1965 to 1976, a total of 798 coaches were produced, including baggage and mail cars that did not exist in the EW-I rang. Model Printed window frames Excellent running qualities with 3-point suspension Interior fittings in multicolour painting NEM-standard short-coupling
On order, shipped within 10-15 days