Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Freight Wagons

Filter products
H0 Covered Freight Car G10 "Westfalia" DB
Brawa 50788 Scale H0
H0 Covered Freight Car G10 "Westfalia" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G "Wittol" DR
Brawa 50790 Scale H0
H0 Covered Freight Car G "Wittol" DR

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Insulated Box Car "Heinrich Jhde" DRG
Brawa 50931 Scale H0
H0 Insulated Box Car "Heinrich Jhde" DRG

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Würth" DB
Brawa 50954 Scale H0
H0 Covered Freight Car G10 "Würth" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Quelle" DB
Brawa 50955 Scale H0
H0 Covered Freight Car G10 "Quelle" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Fritz Homann" DB
Brawa 50956 Scale H0
H0 Covered Freight Car G10 "Fritz Homann" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Krupp Stahl" DB
Brawa 50957 Scale H0
H0 Covered Freight Car G10 "Krupp Stahl" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Maico" DB
Brawa 50959 Scale H0
H0 Covered Freight Car G10 "Maico" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Vorwerk" DB
Brawa 50960 Scale H0
H0 Covered Freight Car G10 "Vorwerk" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Fritz Homann" DB
Brawa 50961 Scale H0
H0 Covered Freight Car G10 "Fritz Homann" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Kölner Kandis" DB
Brawa 50962 Scale H0
H0 Covered Freight Car G10 "Kölner Kandis" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Covered Freight Car G10 "Spatenbräu München" DB
Brawa 50987 Scale H0
H0 Covered Freight Car G10 "Spatenbräu München" DB

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Beer Car Hlf "Kronenbourg" SNCF
Brawa 50994 Scale H0
H0 Beer Car Hlf "Kronenbourg" SNCF

Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

In stock: 1 on the shelf, shipped within 1-3 days

N Tank Car 4-axle Zas-w DR
Brawa 67257 Scale N
N Tank Car 4-axle Zas-w DR

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. Model Fine replica of the Y-25 bogies Precise paintwork and painting NEM-standard short-coupling True to original brake unit

Regular price: CHF 47.75

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car Gmhs35 "Linde" DB
Brawa 67333 Scale N
N Covered Freight Car Gmhs35 "Linde" DB

Prototype With the beginning of World War II and the sharp increase in transportation tasks, the DRG suffered from a striking wagon shortage. The only possible remedy was the construction of new wagon types in order to increase the load capacity and loading space volume on the one hand and to reduce the necessary steel consumption drastically on the other hand. Among others, the twoaxle Gmhs Bremen goods wagon was built as part of these efforts. In comparison with the most recent design, the Ghs Oppeln, the wheel base was enlarged by 1 metre, increasing the loading space by 5 m³. Furthermore, almost 2 tonnes of steel were saved per wagon, pushing the net weight down below 10 tonnes. From 1943 to January 1945, a total of 7,230 wagons were built in this way. 3,440 of them were equipped with a handbrake platform protruding over the buffers on one side, increasing the wagon length by only 100 mm. As a result of the war events, the wagons were spread all over Europe so that Gmhs “Bremen” wagons were found in almost all Central-European countries. The wagons were exchanged between the different railways only in part, and not at all between the countries of the later Eastern bloc and Western Europe. Model Precise paintwork and painting Finely engraved fan grill True to original brake unit on the car bottom NEM-standard short-coupling

Regular price: CHF 40.50

In stock: 1 on the shelf, shipped within 1-3 days

N Tank Car Uerdingen ZZ "OMV" ÖBB
Brawa 67728 Scale N
N Tank Car Uerdingen ZZ "OMV" ÖBB

Prototype In 1939/40, the Köln-Deutz (Cologne-Deutz) and Uerdingen wagon factories each constructed a quadruple axle tank wagons in a lightweight design. Directly related to this, Westwaggon also manufactured the prototype of the tub-style tender, with which the war locomotives belonging to the BR 42 and 52 were coupled. The development was primarily driven by the military since it was necessary to transport enormous amounts of crude oil and fuels for replenishment purposes. As was the case with all war designs, the lightweight design was fully utilised in order to maximise the potential of the available steel quota. However, it soon became apparent that this was done to the detriment of the durability. At this point, both manufacturers were developing wagons with self-supporting tanks. Whilst Deutz left it at puffer beams, the Uerdinger design also boasted solebars manufactured from bevelled profiles that were intended to contribute in absorbing longitudinal compression forces. The main data of both versions was identical: The length over buffers amounted to 12.40 m, the bogie pivot distance amounted to 6.60 m and the tank contained 63 m3. As a result of the compact design, this amount lead to axle and metre load problems, meaning that it was not possible to completely fill the tank on all routes. Pressed sheet metal bogies with a 2.00 m wheel base were used as the running gear. The wagons that were built up until 1945 were deployed at "Wifo" (scientific research community) and oil associations in order to supply the German Armed Forces. After 1945, various European companies reproduced the wagons in a more advanced form, as did Tatra in Prague in 1946. In 1955, SEAG supplied almost 500 units of the wagons developed from the Uerdingen design to the United States Transportation Corps (USTC). Due to the war, many wagons were lost or remained in the territories of other European state railways . The wagons located in the catchment area of the western occupation zones made their way to VTG, which emerged from the former "Wifo" in 1951. In addition to this, mineral oil companies deployed further wagons in the form of P wagons and emerged as main tenants of the VTG wagons. The wagons that stayed with DR remained in the inventory of the state railway and were only leased out on a long-term basis, primarily to PCK Schwedt/ Oder in this case. The last wagons were only removed from the inventory in the 1990s and were being used as maintenance cars or station wagons. In this guise, they could still be regularly seen after the turn of the millennium. Model Brake blocks in wheel plane Separately mounted buffers Precise paintwork and painting Freestanding placards Metal wheels True to original frame construction

Regular price: CHF 40.50

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car Glmmehs57 DB
Brawa 67821 Scale N
N Covered Freight Car Glmmehs57 DB

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 - 1958 - up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model NEM-standard short-coupling Bogie with three-point support True to original brake unit on the car bottom Metal wheels Precise paintwork and painting True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 BLS
Brawa 67872 Scale N
N Covered Freight Car K2 BLS

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Feldbahn starter set with three tipper lorries
Busch 12006 Scale H0
Feldbahn starter set with three tipper lorries

Contents: Feldbahn locomotive LKM Ns 2f (brown with red running gear, similar to those used, among others, at the former brickworks in Bad Freienwalde), 3 tipping lorries, 8 curved tracks with a radius of 115 mm, 1 straight track and 1 connecting track, each 133.2 mm long. Includes battery box with switch (forward/reverse/stop).

Selling price: CHF 223.00 RRP CHF 248.20

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Feldbahn starter set « Transport »
Busch 12013 Scale H0
Feldbahn starter set « Transport »

An exceptionally affordable starter set. Contents: Gmeinder 15/18 PS field railway diesel locomotive in open version with stanchion and end-wall wagons. Track and battery box for 2 LR6/AA batteries (not included) and switch (forward/reverse/stop).

Selling price: CHF 167.00 RRP CHF 185.90

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Two tipper wagons
Busch 12200 Scale H0
Two tipper wagons

Two tipper wagons for use on industrial railways, based on an O&K prototype (built 1936, 1.5 m³ capacity). The bodies of the model are tiltable. Length per wagon: approx. 29 mm.

Selling price: CHF 28.90 RRP CHF 32.30

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Two low-sided open wagons
Busch 12206 Scale H0
Two low-sided open wagons

Two low-sided open wagons with green dropside beds. Length per wagon: 29 mm.

Selling price: CHF 26.90 RRP CHF 30.10

In stock: 1 on the shelf, shipped within 1-3 days

10% off the recommended price
Two wagons with round timber
Busch 12211 Scale H0
Two wagons with round timber

Wagon carrying round timber, e.g. as raw material for cellulose production. Length per wagon: 35 mm.

Selling price: CHF 30.90 RRP CHF 34.50

In stock: 1 on the shelf, shipped within 1-3 days