Locomotives
New for 2026: With the DB BR 184.1 in Era IV, PIKO brings the locomotives known as the Europa-Lok to H0 track. Equipped for various power systems in Germany, France, Belgium and Luxembourg, these locomotives significantly facilitated cross-border traffic. The PIKO design pays a fitting tribute to the locomotive. A glance at the detailed roof equipment immediately draws attention to the finely articulated metal pantographs, which were mounted on the locomotive roof without visible screws. The side panels are defined by fine grilles and engravings. Through the cab door, the view falls on the meticulously modelled engine room, which is ideally highlighted by atmospheric lighting. The cab lighting is also digitally switchable. A look under the body shell reveals the bogies with numerous separately applied parts. The overall impression is rounded off by the clean paint scheme and the sharply contoured lettering. The PIKO Expert model is factory-fitted with a PIKO PSD XP sound decoder and features numerous vehicle-specific sounds.
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: With the DB Class 184.0 in Era IV, PIKO brings the locomotives known as the Europa-Lok to H0 track. Equipped for various power systems in Germany, France, Belgium and Luxembourg, these locomotives significantly facilitated cross-border traffic. The PIKO design pays a fitting tribute to the locomotive. A glance at the detailed roof equipment immediately draws attention to the finely articulated metal pantographs, which were mounted on the locomotive roof without visible screws. The side panels are characterised by fine grilles and engravings. Through the cab door, the view falls on the meticulously modelled engine room, which is ideally highlighted by atmospheric lighting. The cab lighting is also digitally switchable. A look under the body shell reveals the bogies with numerous separately applied parts. The overall impression is rounded off by the clean paint scheme and the sharply contoured lettering. The PIKO Expert model features a PluX22 interface for the straightforward retrofitting of a decoder.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: With the DB BR 184.0 in Era IV, PIKO brings the locomotives known as the Europa-Lok to H0 track. Equipped for various power systems in Germany, France, Belgium and Luxembourg, these locomotives significantly facilitated cross-border traffic. The PIKO design pays a fitting tribute to the locomotive. A glance at the detailed roof equipment immediately draws attention to the finely articulated metal pantographs, which were mounted on the locomotive roof without visible screws. The side panels are defined by fine grilles and engravings. Through the cab door, the view falls on the meticulously modelled engine room, which is ideally highlighted by atmospheric lighting. The cab lighting is also digitally switchable. A look under the locomotive body reveals the bogies with numerous separately applied parts. The overall impression is rounded off by the clean paint scheme and the sharply contoured lettering. The PIKO Expert model is factory-fitted with a PIKO PSD XP sound decoder and features numerous vehicle-specific sounds.
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: With the DB BR 184.0 in Era IV, PIKO brings the locomotives known as the Europa-Lok to H0 track. Equipped for various power systems in Germany, France, Belgium and Luxembourg, these locomotives significantly facilitated cross-border traffic. The PIKO design pays a fitting tribute to the locomotive. A glance at the detailed roof equipment immediately draws attention to the finely articulated metal pantographs, which were mounted on the locomotive roof without visible screws. The side panels are defined by fine grilles and engravings. Through the cab door, the view falls on the meticulously modelled engine room, which is ideally highlighted by atmospheric lighting. The cab lighting is also digitally switchable. A look under the body shell reveals the bogies with numerous separately applied parts. The overall impression is rounded off by the clean paint scheme and the sharply contoured lettering. The PIKO Expert model is factory-fitted with a PIKO PSD XP sound decoder and features numerous vehicle-specific sounds.
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2025: The six-axle electric locomotives of Class E 669.1 have proved themselves in heavy freight traffic for more than half a century. They were developed from the two prototypes of the E 660.0 class, with the aim of avoiding the need to haul freight trains in double-heading. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were used on the DC network in the north and east of the former Czechoslovakia. With the dissolution of Czechoslovakia in 1993, the entire class, now designated 181, passed to the new Czech Railways (ČD). Five examples remain in service today as shunting locomotives under the auspices of ČD Cargo. Form novelty | Digitally controllable cab lighting | Digitally controllable engine room lighting | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | Version with round buffers | With rail guard | Detailed interior in the driver's cabs and engine room | PIKO TrainSound® onboard | fits mfx®
- 3-rail, alternating current
- Sound
On order, shipped within 4-5 days
New for 2026: The six-axle electric locomotives of Class E 669.1 have proved themselves in heavy freight traffic for more than half a century. They were developed from the two prototypes of Class E 660.0, with the aim of avoiding the need to haul freight trains in double traction. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were used on the DC network in the north and east of the former Czechoslovakia. With the dissolution of Czechoslovakia in 1993, the entire class, now designated 181, passed to the new Czech Railways (ČD). Five examples are still in operation today as propelling locomotives under the auspices of ČD Cargo. Digital control of cab lighting and engine room lighting by retrofitting a digital decoder | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | With rail guards | Detailed interior in the driver's cabs and engine room | The electric locomotive features a PluX22 interface and is prepared for the straightforward retrofitting of sound and the largest possible speaker.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: The six-axle E 669.1 electric locomotives have proved themselves in heavy freight traffic for more than half a century. They were developed from the two E 660.0 prototypes with the aim of avoiding the need to haul freight trains in double traction. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built units were operated on the DC network in the north and east of the former Czechoslovakia. Following the dissolution of Czechoslovakia in 1993, the entire class, now classified as 181, passed to the new Czech Railways (ČD). Five examples remain in service today as propelling locomotives under the auspices of ČD Cargo. Digital switchable cab lighting | Digital switchable engine room lighting | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | With rail guard | Detailed interior in the driver's cabs and engine room | PIKO TrainSound® onboard
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: The six-axle E 669.1 electric locomotives have proved themselves in heavy freight traffic for more than half a century. They were developed from the two E 660.0 prototypes with the aim of avoiding the need to haul freight trains in double-heading. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were operated on the DC network in the north and east of the former Czechoslovakia. Following the dissolution of Czechoslovakia in 1993, the entire class, now classified as 181, passed to the new Czech Railways (ČD). Five examples remain in service today as shunting locomotives under the auspices of ČD Cargo. Digital control of cab lighting and engine room lighting by retrofitting a digital decoder | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | Supplied with a rail guard | Detailed interior details in the driver's cabs and in the engine room | The electric locomotive features a PluX22 interface and is prepared for the straightforward retrofitting of sound and a high-quality speaker.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: The six-axle E 669.1 electric locomotives have proved themselves in heavy freight traffic for more than half a century. They were developed from the two E 660.0 prototypes with the aim of avoiding the need to haul freight trains in double traction. Supplied by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were used on the DC network in the north and east of the former Czechoslovakia. With the dissolution of Czechoslovakia in 1993, the entire class, now designated 181, passed to the new Czech Railways (ČD). Five examples are still in operation today as propelling locomotives under the auspices of ČD Cargo. Digitally controllable cab lighting | Digitally controllable engine room lighting | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | With rail guards | Detailed interior in the driver's cabs and engine room | PIKO TrainSound® onboard
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: The six-axle E 669.1 electric locomotives have proved themselves in heavy freight traffic for more than half a century. They were developed from the two E 660.0 prototypes with the aim of avoiding the need to haul freight trains in double traction. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were used on the DC network in the north and east of the former Czechoslovakia. With the dissolution of Czechoslovakia in 1993, the entire class, now classified as 181, passed to the new Czech Railways (ČD). Some examples are also in active service in Poland, including with LOTOS. Digital control of cab lighting and engine room lighting by retrofitting a digital decoder | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | With rail guards | Detailed interior in the driver's cabs and engine room | The electric locomotive features a PluX22 interface and is prepared for the straightforward retrofitting of sound and a large speaker.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: The six-axle E 669.1 electric locomotives have proved themselves in heavy freight traffic for more than half a century. They were developed from the two E 660.0 prototypes with the aim of avoiding the need to haul freight trains in double traction. Delivered by Škoda to the Czechoslovak State Railways (ČSD) in the early 1960s, the 150 built examples were used on the DC network in the north and east of the former Czechoslovakia. With the dissolution of Czechoslovakia in 1993, the entire class, now classified as 181, passed to the new Czech Railways (ČD). Some examples are also in active service in Poland, including with LOTOS. Digitally controllable cab lighting | Digitally controllable engine room lighting | Control desk lighting | Two metal scissors-type pantographs | Detailed roof equipment | With rail guards | Detailed interior in the driver's cabs and engine room | PIKO TrainSound® onboard
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic in service with the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbach works, were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, which was strongly based on diesel locomotives, proved to be prone to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Suitable PSD XP sound decoder: #56649 | Base plate with track replica and suitable retrofitting parts, such as brake hoses, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic in service with the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab built by the Jenbach works were used in shunting duties and could be found in fir green or blood orange versions. The drive concept, which was strongly based on diesel locomotives, proved to be prone to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Metal scissors-type pantograph with fine detailing and no visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation when running, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-typical sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic in service with the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbacher Werke, were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, which was strongly based on diesel locomotives, proved prone to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Metal scissors-type pantograph with fine detailing and no visible screw connections | Detailed replica of the cooling system in the roof superstructure with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation when running, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-specific sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic for the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbacher works, were used in shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved to be prone to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation when running, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Suitable PSD XP sound decoder: #56649 | Base plate with track replica and suitable retrofitting parts, such as brake hoses, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic in service with the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with a central cab, built by the Jenbach works, were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved susceptible to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the roof superstructure with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-typical sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Between 1961 and 1994, the Class 1067 was a true exotic for the ÖBB. Only one prototype and four further locomotives of these electric locomotives were built. They were equipped with a technical special feature: an electro-hydraulic drive. The electric locomotives with central cab built by the Jenbach works were used for shunting duties and could be found in fir green or blood orange versions. The drive concept, strongly based on diesel locomotives, proved susceptible to defects and damage, which is why production was not continued and locomotive 1067.03 was taken out of service as the last active example on 1 October 1994. Today, two of the vehicles can still be admired in the railway museums in Knittelfeld and Ampflwang. Finely detailed metal scissors-type pantograph, without visible screw connections | Detailed replica of the cooling system in the hood with a free-standing fan wheel | Detailed running gear with numerous separately applied parts | Triple headlights with red tail lamps, changing with the direction of travel in analogue operation and switchable in digital operation | Control desk lighting; on in analogue operation, otherwise switchable digitally | Additional digital light functions, such as shunting signal and optionally switchable head and tail lighting | Digital sound versions with numerous vehicle-typical sounds | Base plate with track replica and matching retrofit parts, such as brake lines, coupling hooks and coupling cover, for display in the showcase
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified route between Berlin, Halle (Saale) and Munich, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep gradients of the Frankenwald, it was still able to reach 60 km/h. The active service life of the E 19 ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, the E 19 01 is preserved as an impressive testament to the history of German electric locomotives. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine handrails, UIC sockets and an extra centrifugal governor | Extra sandboxes, axle bearing covers and battery boxes | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified route between Berlin, Halle (Saale) and Munich, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep gradients of the Frankenwald, it was still able to reach 60 km/h. The active service life of the E 19 ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, E 19 01 is preserved as an impressive testament to German electric locomotive history. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine handrails, UIC sockets and an extra centrifugal governor | Extra sandboxes, axle bearing covers and battery boxes | Factory-fitted with a PSD XP digital decoder with sound and a wide range of functions | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Elegance and power at high speed – the Class E 19 The Class E 19 was one of the fastest and most elegant electric locomotives of its time, created for the revolution in rail transport by the Deutsche Reichsbahn in the late 1930s. Designed for operation on the fully electrified Berlin – Halle (Saale) – Munich route, it had a maximum speed of 180 km/h, with reserves for over 200 km/h. On the steep ramps of the Frankenwald, it was expected to reach 60 km/h. The active service life ended with the withdrawal of the last locomotive, E 19 002, in 1978. Today, E 19 01 is preserved as an impressive testament to German electric locomotive history. Version with the typical head lamps of Era IV and filigree SBS 39/54 pantographs | With fine hand details, UIC sockets and extra centrifugal controller | Extra sandboxes, axle bearing covers and battery boxes | Factory-fitted with PSD XP decoder with sound and a variety of functions | Separately applied windscreen wipers, roof conduits and insulators | In digital operation with switchable cab and control desk lighting
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD. A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railway (CSD) in three series between 1973 and 1983, initially classified as Class S 458.0. In 1988, they were reclassified as Class 210. Developed for shunting and light line duties, these locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 2-rail, direct current
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983, initially classified as Class S 458.0. In 1988, they were reclassified as Class 210. Designed for shunting and light line duties, the locomotives also proved themselves in passenger service on the lines of West and South Bohemia.
- 2-rail, direct current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD A total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series between 1973 and 1983, classified as Class S 458.0. In 1988, they were reclassified as Class 210. Designed for shunting and light line duties, the locomotives also proved themselves in passenger services on the lines of West and South Bohemia.
- 3-rail, alternating current
- Sound
On order, lead time to be confirmed
New for 2026: Reliable shunting power under the overhead line – the Class 210 of the CSD. Between 1973 and 1983, a total of 74 electric shunting locomotives were delivered to the Czechoslovak State Railways (CSD) in three series as the Class S 458.0. In 1988, they were reclassified as the Class 210. Developed for shunting and light line duties, the locomotives also proved themselves in passenger services on the lines in western and southern Bohemia.
- 2-rail, direct current
On order, lead time to be confirmed