Railcars & Multiple Units
Prototype Going back to a proposed development from the Westwaggon Company who, together with Waggon- und Maschinenfabrik A.G. and Düsseldorfer Waggonfabrik, was responsible for the manufacture of the new VT 137 347 - 366 and 137 377 - 396 secondary railway railcars, the industry launched the last large-scale range of the typically light railcars on to the tracks in 1939 and 1940. Basis for this was the German National Railway (DR) procurement programme from 1936 which, until this point, ensured the continuous further development of railcars. Typically for this era, the striking basket arch shape with the large buffers characterised the front of the vehicle and allowed the staff to move to the adjacent vehicle via a respective passage located on the front sides during the journey. Model Drive on two axles Free standing steps True to original bogies Sharp engravings Die-cast zinc drive unit Multi-part interior fittings True to original corrugated wheel discs True to era lighting Passenger compartment lighting
On order, shipped within 10-15 days
Prototype Going back to a proposed development from the Westwaggon Company who, together with Waggon- und Maschinenfabrik A.G. and Düsseldorfer Waggonfabrik, was responsible for the manufacture of the new VT 137 347 - 366 and 137 377 - 396 secondary railway railcars, the industry launched the last large-scale range of the typically light railcars on to the tracks in 1939 and 1940. Basis for this was the German National Railway (DR) procurement programme from 1936 which, until this point, ensured the continuous further development of railcars. Typically for this era, the striking basket arch shape with the large buffers characterised the front of the vehicle and allowed the staff to move to the adjacent vehicle via a respective passage located on the front sides during the journey. Model Drive on two axles Free standing steps True to original bogies Sharp engravings Die-cast zinc drive unit Multi-part interior fittings True to original corrugated wheel discs True to era lighting Passenger compartment lighting
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Prototype After the railcars were assumed by the recently-founded German Federal Railway (DB), several design changes were made in the 1950s in order to retrofit the vehicles that now bore the designation VT60.5 for the upcoming service period. At the Friedrichshafen repair centre, the engines were replaced with 330 HP MAN machines that were already used in small locomotives from service group III. The upholstering of the 3rd class which was upgraded to become 2nd class also increased passenger comfort. Furthermore, many railcars were equipped with modern DB lights during the 1960s in order to improve the view of the track and the conspicuous railcar lights from the National Railway era were removed. Colour changes were also made as the uniform purple for DB diesel vehicles replaced the old DR colour scheme. In contrast to the initial settlement, DB distributed their 31 VT60.5 vehicles to many more operating locations. Consequently, the Rheine, Darmstadt, Stuttgart, Kassel, Frankfurt-Griesheim, Heilbronn, Nuremberg and Friedrichshafen railway depots became primary application locations. In doing so, six railcars were leased to the American occupying forces until 1960. As the vehicles aged, the inventory of the VT60.5 shrunk by the mid-1960s and the Rheine railway depot became the de facto discontinuation railway depot for the remaining railcars of the old design belonging to DB. With a fleet of six vehicles, the inventory was the highest here at the start of the 1970s. Four more vehicles were stationed in Nuremberg and two further vehicles were also in service; one in Heilbronn and one in Kassel. These 12 vehicles, which were issued with the EDP-compliant 660 designation, were all removed from regular service by 1972. Converted to radio measurement wagons, the former 660 506 and 660 531 remained in service until 1979. Only the VT 60 531 exists today. Only three railcars - the 137 348, 137 366 and the 137 387 - remained in the Soviet occupation zone following the war. They were utilised from the Aschersleben railway depot. However, all of the railcars were removed from service by 1969 as a result of the poor availability of replacement parts. Alongside the 40 railcars, the procurement plan also allowed for suitable VS145 control cars, particularly for the VT137 347 - 366 and 137 377 - 396. The wagons ordered in accordance with the CPost4ivS- 36 sketch boasted 76 spaces in 3rd class, a control compartment at the front end and a post compartment at the rear end. As the control cars were largely delivered at a different time to the VT, the intended combinations did not materialise from the start. In fact, the liberal applicability was utilised to deploy the VS with other VT designs. During the Federal Railway era, a total of 10 VS145 vehicles were documented for 1952 and were primarily used with the VT60.5. In contrast, the vehicles were also deployed with the VT36.5 or V36 in Bremen and Wuppertal. Now bearing the designation 945, the last VT60.5 was discontinued at Rheine in 1972 together with the last VS145. Model Drive on two axles Free standing steps True to original bogies Sharp engravings Die-cast zinc drive unit Multi-part interior fittings True to original corrugated wheel discs True to era lighting Passenger compartment lighting
On order, lead time to be confirmed
Prototype After the railcars were assumed by the recently-founded German Federal Railway (DB), several design changes were made in the 1950s in order to retrofit the vehicles that now bore the designation VT60.5 for the upcoming service period. At the Friedrichshafen repair centre, the engines were replaced with 330 HP MAN machines that were already used in small locomotives from service group III. The upholstering of the 3rd class which was upgraded to become 2nd class also increased passenger comfort. Furthermore, many railcars were equipped with modern DB lights during the 1960s in order to improve the view of the track and the conspicuous railcar lights from the National Railway era were removed. Colour changes were also made as the uniform purple for DB diesel vehicles replaced the old DR colour scheme. In contrast to the initial settlement, DB distributed their 31 VT60.5 vehicles to many more operating locations. Consequently, the Rheine, Darmstadt, Stuttgart, Kassel, Frankfurt-Griesheim, Heilbronn, Nuremberg and Friedrichshafen railway depots became primary application locations. In doing so, six railcars were leased to the American occupying forces until 1960. As the vehicles aged, the inventory of the VT60.5 shrunk by the mid-1960s and the Rheine railway depot became the de facto discontinuation railway depot for the remaining railcars of the old design belonging to DB. With a fleet of six vehicles, the inventory was the highest here at the start of the 1970s. Four more vehicles were stationed in Nuremberg and two further vehicles were also in service; one in Heilbronn and one in Kassel. These 12 vehicles, which were issued with the EDP-compliant 660 designation, were all removed from regular service by 1972. Converted to radio measurement wagons, the former 660 506 and 660 531 remained in service until 1979. Only the VT 60 531 exists today. Only three railcars - the 137 348, 137 366 and the 137 387 - remained in the Soviet occupation zone following the war. They were utilised from the Aschersleben railway depot. However, all of the railcars were removed from service by 1969 as a result of the poor availability of replacement parts. Alongside the 40 railcars, the procurement plan also allowed for suitable VS145 control cars, particularly for the VT137 347 - 366 and 137 377 - 396. The wagons ordered in accordance with the CPost4ivS- 36 sketch boasted 76 spaces in 3rd class, a control compartment at the front end and a post compartment at the rear end. As the control cars were largely delivered at a different time to the VT, the intended combinations did not materialise from the start. In fact, the liberal applicability was utilised to deploy the VS with other VT designs. During the Federal Railway era, a total of 10 VS145 vehicles were documented for 1952 and were primarily used with the VT60.5. In contrast, the vehicles were also deployed with the VT36.5 or V36 in Bremen and Wuppertal. Now bearing the designation 945, the last VT60.5 was discontinued at Rheine in 1972 together with the last VS145. Model Drive on two axles Free standing steps True to original bogies Sharp engravings Die-cast zinc drive unit Multi-part interior fittings True to original corrugated wheel discs True to era lighting Passenger compartment lighting
On order, shipped within 10-15 days
Prototype After the railcars were assumed by the recently-founded German Federal Railway (DB), several design changes were made in the 1950s in order to retrofit the vehicles that now bore the designation VT60.5 for the upcoming service period. At the Friedrichshafen repair centre, the engines were replaced with 330 HP MAN machines that were already used in small locomotives from service group III. The upholstering of the 3rd class which was upgraded to become 2nd class also increased passenger comfort. Furthermore, many railcars were equipped with modern DB lights during the 1960s in order to improve the view of the track and the conspicuous railcar lights from the National Railway era were removed. Colour changes were also made as the uniform purple for DB diesel vehicles replaced the old DR colour scheme. In contrast to the initial settlement, DB distributed their 31 VT60.5 vehicles to many more operating locations. Consequently, the Rheine, Darmstadt, Stuttgart, Kassel, Frankfurt-Griesheim, Heilbronn, Nuremberg and Friedrichshafen railway depots became primary application locations. In doing so, six railcars were leased to the American occupying forces until 1960. As the vehicles aged, the inventory of the VT60.5 shrunk by the mid-1960s and the Rheine railway depot became the de facto discontinuation railway depot for the remaining railcars of the old design belonging to DB. With a fleet of six vehicles, the inventory was the highest here at the start of the 1970s. Four more vehicles were stationed in Nuremberg and two further vehicles were also in service; one in Heilbronn and one in Kassel. These 12 vehicles, which were issued with the EDP-compliant 660 designation, were all removed from regular service by 1972. Converted to radio measurement wagons, the former 660 506 and 660 531 remained in service until 1979. Only the VT 60 531 exists today. Only three railcars - the 137 348, 137 366 and the 137 387 - remained in the Soviet occupation zone following the war. They were utilised from the Aschersleben railway depot. However, all of the railcars were removed from service by 1969 as a result of the poor availability of replacement parts. Alongside the 40 railcars, the procurement plan also allowed for suitable VS145 control cars, particularly for the VT137 347 - 366 and 137 377 - 396. The wagons ordered in accordance with the CPost4ivS- 36 sketch boasted 76 spaces in 3rd class, a control compartment at the front end and a post compartment at the rear end. As the control cars were largely delivered at a different time to the VT, the intended combinations did not materialise from the start. In fact, the liberal applicability was utilised to deploy the VS with other VT designs. During the Federal Railway era, a total of 10 VS145 vehicles were documented for 1952 and were primarily used with the VT60.5. In contrast, the vehicles were also deployed with the VT36.5 or V36 in Bremen and Wuppertal. Now bearing the designation 945, the last VT60.5 was discontinued at Rheine in 1972 together with the last VS145. Model Drive on two axles Free standing steps True to original bogies Sharp engravings Die-cast zinc drive unit Multi-part interior fittings True to original corrugated wheel discs True to era lighting Passenger compartment lighting
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Drive to two axles Extra mounted and free-standing metal handrails and steps True-to-epoch lighting Finely detailed bogies Fine rivets Illuminated driver´s cab Prepared for sound or with built-in sound Metal drive unit Interior lighting Short coupling kinematics Multipart interior fittings True to original corrugated wheel disks
On order, shipped within 10-15 days
Body with panorama window With interface (digital version with decoder, analog version with soldering points) Free view into the passenger compartment True to original lighting Three-point support Power take-up via wheel loop Conducting coupling Light between wagon units can be switched off (analog and digital) With interior lighting and fittings Digital versions: decoder and loudspeaker in the engine car; with taillights and headlights; trailer true to original only with red taillights
On order, shipped within 10-15 days
Body with panorama window With interface (digital version with decoder, analog version with soldering points) Free view into the passenger compartment True to original lighting Three-point support Power take-up via wheel loop Conducting coupling Light between wagon units can be switched off (analog and digital) With interior lighting and fittings Digital versions: decoder and loudspeaker in the engine car; with taillights and headlights; trailer true to original only with red taillights
On order, shipped within 10-15 days
Body with panorama window With interface (digital version with decoder, analog version with soldering points) Free view into the passenger compartment True to original lighting Three-point support Power take-up via wheel loop Conducting coupling Light between wagon units can be switched off (analog and digital) With interior lighting and fittings Digital versions: decoder and loudspeaker in the engine car; with taillights and headlights; trailer true to original only with red taillights
On order, shipped within 10-15 days
Body with panorama window With interface (digital version with decoder, analog version with soldering points) Free view into the passenger compartment True to original lighting Three-point support Power take-up via wheel loop Conducting coupling Light between wagon units can be switched off (analog and digital) With interior lighting and fittings Digital versions: decoder and loudspeaker in the engine car; with taillights and headlights; trailer true to original only with red taillights
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, shipped within 10-15 days
Prototype For many years now, double-decker trains have successfully formed the backbone of regional traffic. Double-decker trains are the ideal solution, especially on routes with low platform lengths and a high volume of passengers. The tried-and-tested single-wagon concept of the TWINDEXX Vario double-decker fleet is now being supplemented with an electrical railcar. Bombardier Transportation will supply 16 Bombardier TWINDEXX Vario railcars with regional train equipment to Deutsche Bahn AG. The new four-part railcars from the "Do 2010" generation consist of 2 railcars and 2 middle wagons respectively. With the newly-developed driven TWINDEXX Vario railcar, it is now possible to utilise the trains as pure double-decker multiple unit trains. As a result, it is also possible to use this vehicle as an electric multiple unit train alongside the classic push-pull operation with an electric or diesel locomotive. This railcar can be combined with middle wagons and control cars depending upon the application and desired capacity. The central buffer coupling enables operation with double traction and, as a result, the implementation of a wing-train concept. The trains with a combined upper and lower entrance are comfortably equipped with generous seat spacing and plenty of storage space. Furthermore, the double-decker individual wagons permit the extension and shortening of the block train and, consequently, an adjustment to fluctuating demand or future development. As a result, they can be utilised for the most diverse of operational applications in both regional and long-distance traffic. Model Exact scale 1:160 Illuminated passenger compartment Structure made of high-quality, impact-resistant plastic Metal bottom plate Lighting with white LEDs Illuminated destination indicator (analog permanently on, digitally switchable) Long-distance headlights (can only be used digitally with decoder) Perfectly replicated three-dimensional front Illuminated driver's cab (only with decoder) With interior fittings, incl. driver's cab NEM-standard close coupling Light change white/red, in the direction of travel
On order, lead time to be confirmed