Road Vehicles
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: Magirus Deutz 230 D 16, 169 kW / 230 HP with FUCHS F301 H excavator attachment. In 1965, several F301 models were equipped with a hydraulic excavator system from the company Schaeff in Langenburg, which was very well received by customers! A hydraulic system was integrated into the base machine, which was essentially similar to the F301, along with a slightly more powerful engine. A 700 mm wide bucket and a 570 mm wide grapple were available for use. Suitable retrofit kit Sound: item 8450 L 8.1 x W 3.3 x H 3.6 – 6.4 cm
On order, lead time to be confirmed
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: Mercedes-Benz LS (truck tractor) 1624, 177 kW / 240 HP. Suitable retrofit kit Sound: Item 8454 L 7.5 x W 3.3 x H 3.3 cm
On order, lead time to be confirmed
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: MB Actros tractor 1843 V6 engine, 315 kW / 428 HP. Suitable for Märklin heavy-duty flat car, item 48740 L 7.5 x W 3.5 x H 3.7 cm
On order, lead time to be confirmed
Like all models of the CarMotion series, the vehicle comes with the following functions: - Charging and programming connection - Short charging times due to modern lithium polymer batteries - With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible. - Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410 - Infrared transmitter/receiver for distance control (limited compatibility with other IR systems) - Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor - Free cargo area due to underfloor drive unit - Cabin lighting - Braking and reversing lights - Direction indicators right/left and warning lights controllable - Low beam / high beam light - Roof beacons (depending on type of vehicle) - Clear seethrough driver‘s cab with figure - 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers - Compatible with existing systems with contact wire or magnetic tape - Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402 - Even without mechanical guidance a short straight line reverse is possible via steering by the remote control Prototype data: Mercedes-Benz 1624, 6-cylinder inline engine OM 355, 177 kW / 240 HP. Suitable retrofit kit Sound: item 8453 Suitable for Märklin heavy-duty flat car, item 48740 L 8.2 x W 3.3 x H 3.3 – 4.8 cm
On order, lead time to be confirmed
Fits perfectly with items 8011 and 8030 MB ACTROS 3-axle articulate truck. The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 9.8 x W 2.8 x H 3.8 - 8.6 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable Prototype data: MEILLER tipper semitrailer MDKS 28/2, payload ca. 22 t. L 8.8 x W 2.8 x H 3.1 – 8.2 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 8.2 x W 2.9 x H 3.2 – 6.4 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 8.2 x W 2.9 x H 3.2 – 6.4 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 9.8 x W 2.8 x H 3.8 – 8.6 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 6.3 x W 2.8 x H 4.2 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 9.8 x W 3 x H 2.7 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 9.3 x W 2.8 x H 4.2 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 6.3 x W 2.8 x H 4.2 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 6.3 x W 2.8 x H 4.2 cm
On order, lead time to be confirmed
The trailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 12.3 x W 3 x H 3.6 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 14.4 x W 2.9 x H 4.1 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 14.4 x W 2.9 x H 4.4 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 10.5 x B 2.7 x H 3.5 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 10.5 x B 2.7 x H 3.5 cm
On order, lead time to be confirmed
The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer: Infrared transmitter for distance control Braking and reversing lights Direction indicators right/left and warning lights controllable L 10.9 x W 2.8 x H 4 cm
On order, lead time to be confirmed
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set. Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mm Recommended installation space (programming plug): ca. L 55 x W 5 x H 5 mm Cable length to the IR LEDs: each ca. 300 mm IR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm
On order, lead time to be confirmed
The IR Scanner is a locally deployed sensor unit designed to detect vehicle-specific information at defined points along the route. While vehicles are in motion, it captures relevant data in real time and makes this information immediately available to the traffic infrastructure. This enables situation-dependent control of routes, access points, and special zones – precise, automated, and efficient. Continuous data acquisition allows traffic flows to be differentiated in a targeted manner. For example, short vehicles can be preferentially guided into inner-city areas, while long vehicles or vehicle-trailer combinations are automatically routed along alternative paths. Access can also be selectively granted to specific vehicle types, such as allowing buses to enter designated stop areas while other traffic is diverted. Vehicles with a low battery charge can be directed to inductive charging zones, while vehicles with sufficient remaining charge continue without impacting traffic flow. The result is more efficient use of infrastructure while simultaneously relieving sensitive traffic areas.
On order, lead time to be confirmed
The magnetic bar enables you to switch your CarMotion vehicles on and off on your layout even from a distance. No need to lift the vehicle from the road. Length: 12.6 – 64 cm.
On order, lead time to be confirmed
To be used exclusively with the Proxxon angle grinder LHW/A item 29815. Suitable for our 1 mm magnetic tape item 8430. Contents: - enclosure with suction connection - depth limiter - disc cutter 3 mm
On order, lead time to be confirmed