Track Accessories
For clamping to the side of bridges and ramp sections. Height 41 mm.
On order, shipped within 10-15 days
Suitable for straight and curved sections of line. Length 165 mm.
On order, shipped within 10-15 days
Adjustable in length from 150 to 180 mm.
On order, shipped within 10-15 days
These are required for creating isolating points in the catenary and at branches running over points.
On order, shipped within 10-15 days
Length 220 mm.
On order, shipped within 10-15 days
Prototype Flood relief bridge, green steel look. Model Kit for a single-track flood relief bridge in a steel look. With abutments, without piers. The card kit made of high-quality architectural card is precisely laser-cut, with a reproduction of the rivets on the gusset plates on the longitudinal and cross girders and a footway with plank engraving. The kit can be assembled with commercially available adhesives. Dimensions: L 110 mm x W 27 mm x H 27 mm. Highlights Extremely fine engraving
On order, shipped within 10-15 days
Length 110 mm.
On order, shipped within 10-15 days
Radius 145 mm. Track curve 45°.
On order, shipped within 10-15 days
Contains 10 piers. Height 4, 8, 12, 16, 20, 24, 28, 32, 36 and 40 mm.
On order, shipped within 10-15 days
Contains 5 piers. Height 40 mm.
Content: 5 pc. (CHF 2.18 / 1 pc.)
On order, shipped within 10-15 days
The set consists of 2 electromagnetically operated barriers, each with 2 red warning lamps that are lit when the barrier is closed. Size of each base 96 x 37 mm. The following are additionally required for the level crossing: for manual operation: 1 signal hand switch 8946, for automatic operation by the passing train: 1 universal remote switch 8945 and 2 contact tracks (depending on the track layout, e.g. 8529, 8539 or 8589) per track.
On order, shipped within 10-15 days
8 edge segments with track connections for plugging onto the turntable rim. With 2 extension sets the turntable can be expanded to up to 24 track connections. Colour-matched to the 89982 turntable.
On order, shipped within 10-15 days
Model The model is designed for recessed installation in the layout baseboard. 8 track connections around the rim. Can be expanded to up to 24 track connections with the 89971 plug-on edge segments. Richly detailed features and prototypical colour scheme. Remote control of the turntable bridge with the matching control unit included in the contents supplied. Powered by a strong electric motor. Automatic switching off of all tracks that are not in contact with the turntable bridge. A Z gauge controller is also included with the turntable for sensitive running of the locomotives onto and back off the turntable bridge as well as throughout the locomotive depot area. The necessary power supply is also included in the set. Outside diameter of the turntable 170 mm. Length of the turntable bridge 132 mm. Diameter of the installation opening in the baseboard 145 mm. Installation depth approx. 30 mm with the cables connected directly, approx. 50 mm when using plugs. Highlights Prototypical turntable With a control unit for the turntable, a Z gauge controller and a power supply
On order, shipped within 10-15 days
The million-times-proven Massoth rail joiner, made from 100% solid brass profile, is suitable for all Gauge G track Code 332 (LGB, PIKO, TrainLine45, THIEL, Aristocraft, LEBU, etc.). It has been proven in garden railway track construction for decades and is popular among garden railway enthusiasts.
On order, lead time to be confirmed
The million-times-proven Massoth fishplate, made from 100% solid brass profile, is suitable for all Gauge G track Code 332 (LGB, PIKO, TrainLine45, THIEL, Aristocraft, LEBU, etc.). It has been proven in garden railway track construction for decades and is popular among garden railway enthusiasts.
On order, lead time to be confirmed
The million-times-proven Massoth fishplate, made from 100% solid brass profile, is suitable for all Gauge G track Code 332 (LGB, PIKO, TrainLine45, THIEL, Aristocraft, LEBU, etc.). It has been proven in garden railway track construction for decades and is popular among garden railway enthusiasts.
On order, lead time to be confirmed
Connection terminal for track sections such as reversing loops, sectioned track, etc., with associated soldering tab and screw.
On order, lead time to be confirmed
The million-times-proven Massoth fishplate, made from 100% solid nickel-plated brass profile, is suitable for all G gauge Code 332 track (LGB, PIKO, TrainLine45, THIEL, Aristocraft, LEBU, etc.) made of stainless steel or nickel-plated. It has been proven in garden railway track construction for decades and is popular among garden railway enthusiasts.
On order, lead time to be confirmed
The million-times-proven Massoth fishplate, made from 100% solid brass strip and nickel-plated, is suitable for all Gauge G track Code 332 (LGB, PIKO, TrainLine45, THIEL, Aristocraft, LEBU, etc.) made of stainless steel or nickel-plated. It has been proven in garden railway track construction for decades and is popular among garden railway enthusiasts.
On order, lead time to be confirmed
As the successor to the previous 8102350 15 mm nickel-plated fishplates, item 8100231 is supplied in a retail pack of 50 pieces.
On order, lead time to be confirmed
The ideal display solution for Gauge G and Gauge 1 models in shop windows or collector’s cabinets. Robust, wear-free construction particularly suitable for repair, service and testing purposes in the model railway workshop. Equally well suited for digital and analogue operation. Excellent running characteristics due to plain bearing technology. The use of ball bearings would be disadvantageous here. Easy positioning of the transporter bogie modules directly on the track, both straight and curved!
On order, lead time to be confirmed
Miniature rolling test rig for 16.5 mm gauge (H0 gauge) with a minimum axle spacing of just 14 mm. Includes contact spring for centre-rail models. Rollers conform to NEM standards with a 3° taper. Diameter of plain bearing rollers approx. 6.5 mm. Height of wheel support above rail top approx. 7 mm to 8 mm. The set consists of 3 axle bearing blocks (including 1 with contact spring for centre-rail models). Dimensions: 14 x 22.5 x 9 mm.
On order, lead time to be confirmed
Robust insulator rail joiners for Gauge G track (Code 332) made from particularly stable glass-fibre plastic for a secure hold.
On order, lead time to be confirmed
A single length of drawn brass fishplate with additional nickel plating for Gauge 1 track (CODE 250).
On order, lead time to be confirmed