Track System
1 left point with a manual control lever. 188.3 mm / R2 = 437.5 mm / 24.3°. The 74492 electric point mechanism can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
1 right point with a manual control lever. 188.3 mm / R2 = 437.5 mm / 24.3°. The 74492 electric point mechanism can be retrofitted.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 1/1 = 30°. Radius 424.6 mm. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track allows you to realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for naturalistic design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre rail For all those wanting to combine plastic tracks with metal tracks, the 2291 transition track is available
In stock: 2 on the shelf, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous track routing and prototypical layout design. Model Length 2 x 1/2 = 2 x 90 mm. Continuous contact via wheelsets. With an insulated rail section for track occupancy detection when trains pass over it. The contact section can be extended with straight and curved tracks. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you realise elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung track planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Reliable electrical operation thanks to the proven centre conductor For anyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock: 2 on the shelf, shipped within 1-3 days
For connecting a transformer and up to 2 Mobile Stations 60652. Length 188.3 mm.
In stock: 2 on the shelf, shipped within 1-3 days
Length 1/2 = 90 mm. Momentary contact via vehicle pickup shoe.
In stock: 2 on the shelf, shipped within 1-3 days
3 track connections for C tracks. To be fitted at any position. Built-in track power contacts. Length 57.5 mm.
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Märklin crossing combines robustness, electrically reliable connections and a prototypical appearance. The crossing can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin crossing with a length of 112.8 mm. 13°. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down
In stock: 2 on the shelf, shipped within 1-3 days
Prototype The Märklin left-hand electromagnetic point combines robustness, electrically reliable connections and a prototypical appearance. The electromagnetic point can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin left-hand electromagnetic point with a length of 110 mm. 13°. Radius 490 mm. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability Quick setting up and taking down Note The 8562 L and 8563 R points have a twin-coil drive and a manual operating lever. They are operated by means of the 7272/72720 control panel or circuit tracks.
In stock: 2 on the shelf, shipped within 1-3 days
For electrically isolating the rail lengths and for conductively connecting the rail ends. 2 insulating or 2 connecting fishplates are required in each case. The set contains material for 5 isolating points and 10 connecting points.
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW15, without turnout mechanisms. Standard design with internal switch rails. Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 are included. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout left hand BWl2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout. Previous item no: 42464
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr2/3, without turnout mechanism. Radius of main track and branch track 358 mm (R2), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout. Previous item no: 42465
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout left hand BWl5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42470
In stock: 2 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030.
In stock: 2 on the shelf, shipped within 1-3 days
Turnout left hand Wl10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Turnout right hand Wr10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42493
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Previous item no: 42497
In stock: 2 on the shelf, shipped within 1-3 days
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 40295 (electric turnout mechanism left) or 40297 (manual turnout mechanism left) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 2 on the shelf, shipped within 1-3 days
Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 are included for diagonal installation.
In stock: 2 on the shelf, shipped within 1-3 days