Track System
Prototype The Märklin isolating track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin straight isolating track with a length of 55 mm. With connection terminals. One length of rail is interrupted in the middle. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability. Quick setting up and taking down
On order, shipped within 10-15 days
Prototype The Märklin circuit track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be expanded at will. The ideal track system for newcomers and professionals. Model Märklin straight circuit track with a length of 55 mm. With connection terminals. A train running over it triggers the switching function. The click connection with the "Click". Set up and taken down in no time. Stable and durable. Highlights Prototypical appearance Electrical operating reliability. Quick setting up and taking down
On order, shipped within 10-15 days
Allows reversing loops to be run through from one side when the tracks are arranged according to their markings. The set consists of 3 x isolating track 110 mm long and one straight track 25 mm long.
On order, shipped within 10-15 days
Digital track contact for feedback at the feedback module, suitable for the DiMAX digital system. A wear-free Hall sensor is used. Activation is via a locomotive magnet that is attached under the locomotive. The digital track contact cannot be used with the LGB EPL control or the reversing loop module. (2/pieces)
On order, lead time to be confirmed
For the power supply of the G controller #35002, weatherproof. Primary: 230 V AC Secondary: 22 V/100 VA DC Note IP 67: This power supply is designed for garden railway operation so that it meets the IP protection classes of DIN EN 60529. It is completely protected against touch and the ingress of dust as well as against the ingress of water during temporary immersion. Dimensions of the item: L x W x H = 230 mm x 110 mm x 80 mm
On order, lead time to be confirmed
For the power supply of the G controller #35002, weatherproof. Primary: 230 V AC Secondary: 22 V /36 VA DC Note IP 67: This power supply is designed for special garden railway operation so that it meets the IP protection classes of DIN EN 60529. It is completely protected against contact and the ingress of dust as well as against the ingress of water during temporary immersion.
On order, shipped within 4-5 days
Input: max. 22 V DC, 1.6 A Output: 0-22 V DC, 1.6 A constant 16 V DC, 0.4 A
On order, shipped within 4-5 days
A problem-free operation can only be guaranteed when used in conjunction with the PIKO 35000 power supply. The control unit must be powered exclusively by a DC power supply. The digital control unit is the core of the digital control system for Gauge G. It can deliver up to 5 A at 22 V to the track. This allows longer trains with multiple locomotives to be controlled simultaneously on garden railway layouts. The digital control unit operates according to the NMRA-DCC standard and is therefore also compatible with DCC decoders from other manufacturers. Stop and reset buttons enable very simple operation. The operating status is indicated by LEDs. Connection is made conveniently via 4 push-in terminals. Control can be carried out either wired via the Navigator (35037) or wirelessly via radio with the Navigator (35037) and radio receiver (35038). - Power supply 16-24 V DC - Track voltage max. 22 V DCC - Max. total current 5 A regulated - Overload, short-circuit and temperature monitoring - 9999 locomotive addresses - 14, 28 and 128 speed levels - 2048 point addresses - 2048 feedback addresses - Functions F1 - F16 - up to 30 bus devices can be connected - Illuminated "Emergency Stop" button - Illuminated "Reset+Program" button - Splash-proof thanks to cover flaps
On order, lead time to be confirmed
The weatherproof point decoder is used for the digital control of point motors. One decoder can control up to four points. The point decoder is suitable for drives with two connections (e.g. PIKO 35271 with motor coil) or for double-coil drives. Control is via an NMRA-DCC digital central station (e.g. PIKO 35010).
On order, shipped within 4-5 days
Straight track G-G320 - length 321.54 mm G-G320 + G-G280 result in a module length of 600 mm Only available in packing unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G280 - length 278.46 mm G-G280 + G-G320 result in a module length of 600 mm Only available in packaging unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G160 - length 160.77 mm 2x G-G160 make up the track G-G320 Only available in packing unit (VE). VE 12
On order, shipped within 4-5 days
Straight track G-G140 - Length 139.23 2x G-G140 make up the track G-G280 Only available in packing unit (PU). PU 12
On order, shipped within 4-5 days
Straight track G-G95 - Length 96.15 Parallel track to the 60° crossing Only available in packing unit (PU). PU 12
On order, shipped within 4-5 days
New for 2025: Only available in pack units (VE). Pack of 6
On order, lead time to be confirmed
Straight track G-G600 - Length 600 mm corresponds to the module length of 600 mm Only available in packaging unit (VE). VE 12
On order, shipped within 4-5 days
Straight track - length 1,200 mm equals 2x module length of 600 mm. Only available in packaging unit (VE). VE 6.
On order, shipped within 4-5 days
Curved track, radius 600 mm/30°, 12 pieces/circle. Only available in packaging unit (PU). PU 12
On order, shipped within 4-5 days
Curve, r = 921.54 mm/30°, 12 pcs/circle Only available in pack units (VE). VE 12
On order, shipped within 4-5 days
Only available in packaging units (VE). VE 12 sheets, r = 921.54 mm/7.5°, 48 pcs/circle
On order, shipped within 4-5 days
Curved track, r = 1,243.08 mm/15°, 24 pcs/circle. Only available in packaging unit (PU). PU 12
On order, shipped within 4-5 days
Curve, r = 1,200 mm/7.5°, 48 pcs/circle Only available in packaging unit (VE). VE 12
On order, shipped within 4-5 days
Only available in packaging units (VE). VE 12 sheets, r = 1,564.6 mm/15°, 24 pcs/circle
On order, shipped within 4-5 days
Only available in packaging units (VE). VE 12 sheets, r = 1,564.6 mm/7.5°, 48 pcs/circle
On order, shipped within 4-5 days