Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Track System

Filter products
11% off the recommended price
Track ballast bed with point motor
TILLIG 83960 Scale H0m
Track ballast bed with point motor

Electric point motor, TT ballasted track

Selling price: CHF 19.90 RRP CHF 22.50

On order, lead time to be confirmed

10% off the recommended price
Grey ballast track with ballast finish
TILLIG 83961 Scale H0m
Grey ballast track with ballast finish

Ballast finisher (pack of 4)

Selling price: CHF 4.20 RRP CHF 4.70

On order, lead time to be confirmed

Wooden sleeper flexible track
TILLIG 85125 Scale H0
Wooden sleeper flexible track

Wooden sleeper flexible track, length 890 mm

Selling price: CHF 7.50 RRP CHF 8.30

On order, lead time to be confirmed

Concrete sleeper flexible track
TILLIG 85134 Scale H0
Concrete sleeper flexible track

Betonschwellenflexgleis, length 470 mm

Selling price: CHF 5.60 RRP CHF 6.20

On order, lead time to be confirmed

Steel sleeper flexible track
TILLIG 85136 Scale H0
Steel sleeper flexible track

Steel sleeper flexible track, length 470 mm

Selling price: CHF 5.60 RRP CHF 6.20

On order, lead time to be confirmed

Branch to the right
TILLIG 85183 Scale H0
Branch to the right

Right-hand turnout H0-H0m, turnout angle 15°, radius 363, 228 mm

Selling price: CHF 30.90 RRP CHF 34.10

On order, lead time to be confirmed

12% off the recommended price
Kit of four grey buffer stops for the ELITE track system
TILLIG 85511 Scale H0
Kit of four grey buffer stops for the ELITE track system

Kit of four grey buffer stops for the ELITE track system

Selling price: CHF 13.90 RRP CHF 15.90

On order, lead time to be confirmed

12% off the recommended price
Kit of four yellow buffer stops for the ELITE track system
TILLIG 85512 Scale H0
Kit of four yellow buffer stops for the ELITE track system

Kit of four yellow buffer stops for the ELITE track system

Selling price: CHF 13.90 RRP CHF 15.90

On order, lead time to be confirmed

15% off the recommended price
H1 Track Extension Set
Trix 14311 Scale N
H1 Track Extension Set

Model The track extension set H1 can be used to expand the track plan of the current starter sets. Can be expanded seamlessly with the entire Minitrix track programme. All of the points can be fitted later with the 14934/14935 electric point motors. Note Contents: 2 x 14903 straight track 17.5 mm. 10 x 14904 straight track 104.2 mm. 1 x 14905 straight track 76.3 mm. 6 x 14906 straight track 54.2 mm. 1 x 14909 straight track 33.6 mm. 1 x 14927 curved track R 4 - 15°. 1 x manual uncoupler track (not available separately). 2 x 14938 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14939 right-hand point R 4 - 15° with a polarised common crossing. 1 x 14991 buffer stop 50.0 mm. Example for expansion: 11146 with 14311 150 x 60 cm / 60" x 24" recommended baseboard size

Selling price: CHF 143.65 RRP CHF 169.00

On order, shipped within 10-15 days

15% off the recommended price
H2 Track Extension Set
Trix 14312 Scale N
H2 Track Extension Set

Model The track extension set H2 can be used to expand the track plan of the current starter sets already fitted with the track extension set H1. Can be expanded seamlessly with the entire Minitrix track programme. All of the points can be fitted later with the 14934/14935 electric point motors. Note Contents: 8 x 14904 straight track 104.2 mm. 3 x 14906 straight track 54.2 mm. 12 x 14910 curved track R 2a – 30°. 1 x 14938 left-hand point R 4 – 15° with a polarised common crossing. 1 x 14939 right-hand point R 4 – 15° with a polarised common crossing. Example for expansion: 11146 and 14311 with 14312 50 x 60 cm / 60" x 24" recommended baseboard size

Selling price: CHF 114.75 RRP CHF 135.00

On order, shipped within 10-15 days

15% off the recommended price
B1 Track Extension Set
Trix 14321 Scale N
B1 Track Extension Set

Model The track extension set B1 can be used to expand the track plan of the current starter sets. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 2 x 14500 straight track 112.6 mm. 2 x 14503 straight track 17.5 mm. 8 x 14504 straight track 104.2 mm. 4 x 14594 straight track 126.3 mm. 1 x 14518 curved track R 5 - 15°. 1 x manual uncoupler track (not available separately). 2 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. 1 x 14591 buffer stop 50.0 mm. Example for expansion: 11161 with 14321 150 x 60 cm / 60" x 24" Recommended baseboard size for the layout with the starter set and the B1 and B2 extensions.

Selling price: CHF 143.65 RRP CHF 169.00

On order, shipped within 10-15 days

15% off the recommended price
B2 Track Extension Set
Trix 14322 Scale N
B2 Track Extension Set

Model The track extension set B2 expands the track plan of the current starter sets that have already been fitted with the track extension set B1. Can be expanded seamlessly with the entire Minitrix concrete sleeper track programme. All of the points can be fitted later with the 14534/14535 electric point motors. Note Contents: 1 x 14500 straight track 112.6 mm. 4 x 14504 straight track 104.2 mm. 2 x 14593 straight track 108.4 mm. 2 x 14594 straight track 126.3 mm. 12 x 14510 curved track R 2a – 30°. 1 x 14538 left-hand point R 4 - 15° with a polarised common crossing. 1 x 14539 right-hand point R 4 - 15° with a polarised common crossing. Example for expansion: 11161 and 14321 with 14322 (external dimensions: approx. 139 x 53 cm) Recommended baseboard size: 150 x 60 cm / 60" x 24"

Selling price: CHF 114.75 RRP CHF 135.00

On order, shipped within 10-15 days

14% off the recommended price
Minitrix Electric Turnout Mechanism for a Left Turnout with Concrete Ties
Trix 14534 Scale N
Minitrix Electric Turnout Mechanism for a Left Turnout with Concrete Ties

(Below-baseboard mounting on the right).

Selling price: CHF 20.40 RRP CHF 23.99

Pre-order, release expected in December 2026

14% off the recommended price
Minitrix Electric Turnout Mechanism for a Right Turnout with Concrete Ties
Trix 14535 Scale N
Minitrix Electric Turnout Mechanism for a Right Turnout with Concrete Ties

(Below-baseboard mounting on the left).

Selling price: CHF 20.40 RRP CHF 23.99

Pre-order, release expected in December 2026

14% off the recommended price
Minitrix Left Turnout with Concrete Ties
Trix 14547 Scale N
Minitrix Left Turnout with Concrete Ties

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix curved point R3/R4 left-hand with a polarised common crossing and a curve angle of 30°. The track alignment is considerably slimmer. Nevertheless, the space required is still not too great even for smaller layouts. An electric drive can be retrofitted. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.

Selling price: CHF 40.80 RRP CHF 47.99

Pre-order, release expected in November 2026

14% off the recommended price
Minitrix Right Turnout with Concrete Ties
Trix 14548 Scale N
Minitrix Right Turnout with Concrete Ties

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix curved point R3/R4 right-hand with a polarised common crossing and a curve angle of 30°. The track alignment is considerably slimmer. Nevertheless, the space required is still not too great even for smaller layouts. An electric drive can be retrofitted. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel Note Curved points for radii 3 and 4. The point curve corresponds to 30°. An electric drive can be retrofitted.

Selling price: CHF 40.80 RRP CHF 47.99

Pre-order, release expected in November 2026

14% off the recommended price
Minitrix Electric Double Slip Switch with Concrete Ties - 15° Length 129.8 mm / 5-1/8"
Trix 14560 Scale N
Minitrix Electric Double Slip Switch with Concrete Ties - 15° Length 129.8 mm / 5-1/8"

Prototype Concrete sleeper track is now standard across Europe – and that should also apply to the model railway. N gauge is now getting concrete sleeper track with an NEM-compliant Code 60 rail profile. Model Minitrix straight track with a length of 129.8 mm. Curved track = R 4 -15° + 2 x 14903. Removable drive with a mechanism for the point lantern and end shut-off. Highlights Minitrix solid-profile rails with a rail profile to NEM Code 60 Solid-profile rails made of a stainless special alloy The material and rail profile provide reliable contact for transmitting current to the wheel

Selling price: CHF 63.75 RRP CHF 74.99

Pre-order, release expected in December 2026

14% off the recommended price
Minitrix Uncoupler Track Length 76.3 mm / 3"
Trix 14969 Scale N
Minitrix Uncoupler Track Length 76.3 mm / 3"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model Minitrix uncoupler track with a length of 76.3 mm. This allows locomotives and wagons to be uncoupled by remote control. The electromagnetic drive is operated with the Märklin 72710 or 72720 control panel. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 25.50 RRP CHF 29.99

On order, shipped within 10-15 days

14% off the recommended price
Minitrix Vario Track Length 86.5 to 120 mm / 3-3/8" to 4-3/4"
Trix 14975 Scale N
Minitrix Vario Track Length 86.5 to 120 mm / 3-3/8" to 4-3/4"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model For when the planned track alignment will not work out despite the many possibilities of the Minitrix track range. It can be adjusted to any length between 86.5 and 120 mm. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 9.35 RRP CHF 10.99

On order, shipped within 10-15 days

14% off the recommended price
Minitrix Contact Track Length 50.0 mm / 2"
Trix 14979 Scale N
Minitrix Contact Track Length 50.0 mm / 2"

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model For train-controlled triggering of automatic functions, contact reliability thanks to a double-contact system. The switching operation is triggered only by at least two metal wheels electrically connected to each other, not by individual wheels or plastic wheels. Minitrix contact track with a length of 50 mm (corresponds to 14907). The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 7.65 RRP CHF 8.99

On order, shipped within 10-15 days

14% off the recommended price
Minitrix Contact Track with a Magnet Switch Length 50 mm
Trix 14980 Scale N
Minitrix Contact Track with a Magnet Switch Length 50 mm

Prototype The Minitrix track combines robustness, electrically reliable connections and a prototypical appearance. The track system can be extended as desired. The ideal track system for newcomers and professionals. Model For switching signals, points, etc. Max. switching current 1 A, the function is triggered by the Märklin 7556 magnet. Minitrix contact track with magnetic switch with a length of 50 mm (corresponding to track 14907). The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Minitrix track is the ideal track for quickly setting up a track figure on the table or on the floor. With six curve radii, flexible track, standard or slim points and crossings, the Minitrix track system offers ideal conditions. The most important thing is careful laying of the track. Small unevenness, shavings left lying under the track or deburred drill holes have a proportionally stronger effect in 1:160 scale than in larger scales. For trouble-free operation it is advisable to mount the N layout on a firm base of board or frame construction. Minitrix tracks have solid-profile rails made of a stainless special alloy. Together with the prototypical profile cross-section, this guarantees unsurpassed contact reliability between wheel and rail. For easy expanding of your layout there are also various track extension sets with item no. 14311 and 14312. This allows parallel circuits, passing loops and sidings to be built up easily. Highlights Prototypical appearance Electrical reliability in operation Quick assembly and dismantling

Selling price: CHF 18.70 RRP CHF 21.99

On order, shipped within 10-15 days

14% off the recommended price
Trix C Track C2 Extension Set
Trix 62902 Scale H0
Trix C Track C2 Extension Set

Model Contents: 3 straight tracks 62188, 5 straight tracks 62172, 2 curved tracks 62224, 1 point 62611, 1 point 62612 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the small C track starter set with a passing loop.

Selling price: CHF 68.00 RRP CHF 79.99

On order, shipped within 10-15 days

14% off the recommended price
Trix C Track C3 Extension Set
Trix 62903 Scale H0
Trix C Track C3 Extension Set

Model Contents: 7 straight tracks 62188, 7 straight tracks 62172, 2 curved tracks 62130, 1 curved point 62671, 1 curved point 62672 and assembly instructions. The Trix C track is the ideal track for quickly building a track layout on the table or on the floor. The low-resistance click connections at the rail ends are particularly reliable for contact and conductivity. The connections are designed to be mechanically very precise and give the assembled track sections a high degree of inherent stability. The power for running trains and for operations on the model railway can be fed in anywhere. The feeder wires are connected with flat plugs to the contact tabs present in every track section. That gives the flexibility for the most varied model railway lines. A track system that allows new running experiences again and again on ever new line arrangements! Anyone who already owns a "two-rail" layout also benefits from the Trix C track: the elegant ballasted track is used for any extension, and the transition track (62951) is used for the transitions into the existing areas, providing the link between Trix C tracks and conventional Code 83 tracks. The slim rail profile of the Trix C track is 2.07 mm high and thus meets the Code 83 standard. All H0 vehicles whose wheel flanges are designed to NEM run here – and that is practically all of the models for the two-rail supply system newly offered by the various manufacturers in the last two decades! The track thus contributes directly to the important compatibility of this H0 area. Note For extending the C track starter sets with a passing loop with a curved point.

Selling price: CHF 85.00 RRP CHF 99.99

On order, shipped within 10-15 days

14% off the recommended price
Feeder Clip
Trix 66519 Scale N
Feeder Clip

Model With the Minitrix 66519 connection terminal (1-pole) you ensure a flexible and reliable power supply for your N gauge layout. Whether for isolating points, switched-off sections or areas that are hard to reach – the compact terminal provides a reliable track power connection exactly where you need it. Highlights 1-pole connection terminal for the Minitrix N track system (N gauge, 1:160) Simple mounting directly on the track – also ideal in the hidden area of the layout Flexible use for signal isolating sections, block protection or switched-off tracks Robust and compact design for durable, operationally reliable connections Perfect for retrofitting or extending existing track power circuits Note Minitrix connection terminals and contacts allow the track power feeder wires to be connected conveniently (e.g. at signal isolating sections, switched-off tracks, block protection, etc.) at any point on the track layout, even in the middle of complicated point work.

Selling price: CHF 2.30 RRP CHF 2.69

On order, shipped within 10-15 days