Accessories
The layout grows – Track-Control too The extension set contains 30 segments with scatter discs and click connectors, 32 key caps, four point boards, four signal boards, two crossing connection boards, four connection boards without cut-outs and four different films. Track-Control can be expanded as required. With a large control panel, the power from one connection module may no longer be sufficient. In that case, simply add another 69050 connection module.
On order, lead time to be confirmed
We now offer a complete 9-button control panel with which you can switch 9 different control functions directly. The set includes the connection module, three 3-button modules and 15 segments with plug-in connectors.
On order, lead time to be confirmed
Track-Control – the start The basic set of the "Track-Control Analog" is the inexpensive entry into control panel technology for analogue model railways. It contains all the items that form part of the basic equipment and are only required once per control panel: a connection module, a LocoNet cable and the manual. It also includes a LocoNet analogue switching module, 30 segments with diffusers and connectors, 32 key caps, three turnout boards, three signal boards, four cross-connection boards, two connection boards without illumination and a set of foils for building a small control panel. Extensions You can use all extensions from our Track-Control range, except for the train number display and the speed controller. For occupancy detection (red illumination), Märklin AC modellers use the feedback module 63330. DC modellers need a combination of the feedback module 63330 and the track occupancy detector 43400 for this. The LocoNet switching modules 63410 can also be used. The advanced functions, such as routes, occupancy detections ... are set with the LocoNet Tool and TC-Edit programs. For this you need the USB-LocoNet interface 63120.
On order, lead time to be confirmed
The affordable module makes TrackControl attractive even for small layouts with only a few control panel elements, which draw their required power directly from the LocoNet. For the power supply of large control panels, you can combine several connection modules with the LocoNet distributors 62260 (page 26) and plug-in switched-mode power supplies 62270.
On order, lead time to be confirmed
Item no. 69091 Track-Control film with point symbols
On order, lead time to be confirmed
Item no. 69091 Track-Control film with point symbols
On order, lead time to be confirmed
Item no. 69093 Track-Control film signal symbols
On order, lead time to be confirmed
Item no. 69094 Track-Control film special symbols
On order, lead time to be confirmed
Item no. 69095 Track-Control film, track and empty field symbols
On order, lead time to be confirmed
Item no. 69096 Track-Control film signal symbols, left-hand running
On order, lead time to be confirmed
Item no. 69100 6 plastic segments with scatter discs and connectors
On order, lead time to be confirmed
Track-Control 6 closed plastic segments with plug-in connectors
On order, lead time to be confirmed
Item no. 69110 5 key caps in the colours blue, yellow, green, red, black and white
On order, lead time to be confirmed
Item no. 69210 2 cross-connection boards with illumination
On order, lead time to be confirmed
Item no. 69212 4 connection boards without cut-outs
On order, lead time to be confirmed
Item no. 69214 2 connection boards with illumination
On order, lead time to be confirmed
Turnout board for the Track-Control track diagram control panel. For switching turnouts, double slip turnouts, single slip turnouts, three-way turnouts, lighting and uncouplers. The key controls up to two solenoid accessory addresses.
On order, lead time to be confirmed
Signal board for the Track-Control track diagram control panel. For switching digitalised signals, including multi-aspect signals. Plug-in system, no wiring required.
On order, lead time to be confirmed
Item no. 69240 Track-Control route memory
On order, lead time to be confirmed
When using the locomotive-specific control system "LISSY" or the modular automation for RailCom "MARCo", the train numbers of trains passing the assigned LISSY sensor or the MARCo track section are displayed. This can occur, for example, on the departure track of a station.
On order, lead time to be confirmed
By combining three buttons into one segment, you save space and have greater flexibility in designing the control panel. With this affordable module, all additional functions on the model railway layout can be controlled, such as lighting, barriers, gate motors, the lifting magnet of a jib crane, a water crane, and much more. Routes can also be set via the buttons.
On order, lead time to be confirmed
Item no. 69280 Left-running signal board
On order, lead time to be confirmed
The speed controller is as large as three control panel segments and can be easily integrated into the track layout control panel. Up to 9999 locomotives can be selected and controlled using the numeric keys f0–f9.
On order, lead time to be confirmed
DigiTest is the new universal test and programming device for all decoders, sound modules and sound decoders. DigiTest is a stand-alone test device that is connected to a computer via a USB port. A digital command station is not required. It offers you the following functions: Testing of all DCC-capable decoders, sound decoders and sound modules Reading and programming of CVs Loading of new software versions into IntelliDrive 2 decoders and Piko V4.1 decoders All functions are conveniently monitored and carried out on the PC. DigiTest has a large number of connections so that all decoders can be tested. Programming track 6-pin (NEM 651) 8-pin (NEM 652) Next 18 (RCN-118) Next 18S (RCN-118) PluX (RCN-122) 21mtc (RCN-121) Terminal connection SUSI microSUSI As you can see, DigiTest also has a programming track connection. On a track connected to it, the CVs of decoders installed in vehicles can be read and programmed. Sound files can also be loaded into IntelliSound modules and decoders while installed, on the programming track, if an IntelliDrive 2 decoder is installed in the vehicle. On the programming track the IntelliDrive 2 decoders can also receive new software. Required operating system: Microsoft Windows 7, 8, 10 Art. no. 71000 DigiTest – Test and programming device with plug-in power supply
On order, lead time to be confirmed