Electronics
The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:
In stock: 4 on the shelf, shipped within 1-3 days
Flickering fire: the name says it all: a variety of red, orange and yellow hues alternating with quick, soft transitions in a rapid sequence.
In stock: 4 on the shelf, shipped within 1-3 days
Neat wiring! Yellow low-voltage distribution board with 2 x 10 sockets, including 10 yellow plugs, 2.5 mm. Identification colour according to NEM recommendation.
In stock: 4 on the shelf, shipped within 1-3 days
Gauge: H0, N, TT, Z Colour: brown Contents: distribution board with 2 x 10 sockets, 10 plugs 2.5 mm Identification colour according to NEM recommendation
In stock: 4 on the shelf, shipped within 1-3 days
4 series circuit boards for motorised points for the m83 decoder. For using motorised point motors with cut-off at the end stop. Can only be used in conjunction with the m83 (60831/60832). When operated with the m83, the operating speed as well as a slow approach to the end position can be programmed.
In stock: 4 on the shelf, shipped within 1-3 days
Model Connection option for the s88 (60881) and s88 DC (60882) and the previous s88 feedback modules (6088 and 60880) to the Central Station II and Central Station 3 or to the 60145 Terminal. One previous connection socket for the 6088 and 60880 feedback modules as well as two RJ45 sockets for the new 60881 and 60882 feedback modules are available. In addition, there are 16 inputs for contact devices (common return detector as on the 60881). These 16 inputs can be configured specially for track diagram control panels, so that a matrix with up to 64 push buttons can be created. A 66360 or 60201 switched-mode power supply is required for operation. Highlights All connections with lift terminals
In stock: 4 on the shelf, shipped within 1-3 days
High-performance decoder for retrofitting Märklin H0 locomotives with a built-in 6090 high-performance drive to the new version with more functions. The electronics feature a total of 4 switchable functions. The "function" output is intended for lighting. The "f1" and "f2" outputs can be used for other switchable functions such as Telex coupling or smoke generator. The "f4" function allows the regulation to be switched off for easier shunting.
In stock: 4 on the shelf, shipped within 1-3 days
Circuit board with 2 buffer capacitors of 1 farad each for connection to the mLD3 and mSD3 with the item nos. 60972, 60975, 60976 and 60977. The buffer capacitor prevents, for example, flickering lights and sound dropouts caused by dirty track sections, for example.
In stock: 4 on the shelf, shipped within 1-3 days
Model Pack of 10 pieces. Matching the standard plugs and sockets from the 71400 assortment. Note The plugs and sockets cannot be combined with the earlier version (pack item no. 7130). The sockets fit with limitations in the jacks of control panels and switch panels of the earlier version. The controllers and decoders in the current Märklin range have been converted to the new standard.
Content: 10 pc. (CHF 0.49 / 1 pc.)
In stock: 4 on the shelf, shipped within 1-3 days
Model For the 73400 interior lighting. With an asymmetric pickup shoe and a common return spring. Note The combination of 2 x 73400 + 1 x 73406 is the standard lighting for the new UIC-x coaches with a length over the buffers of 28.2 cm.
In stock: 4 on the shelf, shipped within 1-3 days
Model Universal circuit board with several LEDs for retrofitting most of the coaches in the Märklin H0 range. A built-in buffer capacitor allows flicker-free operation. The brightness of the interior lighting can be adjusted manually. The circuit board can be shortened at several places for shorter coaches. Retaining clips for mounting on the interior details are included. Highlights A cosy feel in the coach: dimmed LEDs. Flicker-free operation thanks to a buffer capacitor Adjustable brightness for the interior lighting
In stock: 4 on the shelf, shipped within 1-3 days
Is inserted at the rail joint between the contact fishplates of the tracks.
In stock: 4 on the shelf, shipped within 1-3 days
Contents: 10 pieces each. They are required for the connection to other track when the 2205 flexible track is shortened.
In stock: 4 on the shelf, shipped within 1-3 days
For hooking into the tower masts. It spans 3 tracks. The span is approximately 72 mm.
In stock: 4 on the shelf, shipped within 1-3 days
For easy switching of reversing loops in the DCC and Selectrix systems. No solenoid switch is required. Also suitable for computer operation. Polarity changeover optionally by means of short-circuit detection or sensor tracks (current sensors). Suitable for Minitrix and Trix H0.
In stock: 4 on the shelf, shipped within 1-3 days
For eliminating motor interference in digital locomotives. Electric motors generally produce interference that can alter the data transmission to a digital decoder to such an extent that normal digital operation of the decoder is no longer possible. In new locomotives, the motors are generally suppressed. Older models have to be retrofitted with the appropriate electronic components. The motor suppression kit consists of a capacitor, two chokes and installation instructions, and can be used in all H0 locomotives.
In stock: 4 on the shelf, shipped within 1-3 days
A compact module for easy connection and bright flicker-free LED lighting. The plug-in rail on the top allows a comfortable connection of 12 loads without soldering, just by plugging the leads of resistors and diodes into the sockets of the plug-in rail. Ideal for the interior lighting sets items 6045 – 6048. Cables for connection to a transformer are included. Input voltage 16 V AC, output voltage approx. 22 V DC, max. current 400 mA continuously, overcurrent protection. Plug-in rail is extendable, e. g. item 6049. Provides up to 25 LED lights. Dimensions (without mounting): L 3,7 x W 2,6 x H 2,2 cm.
In stock: 4 on the shelf, shipped within 1-3 days
With impulse contact for 4 turnouts resp. for 2-aspect semaphore signals or up to 8 uncoupling tracks. Especially suitable for the hobby colour light block signal item 4021, signal module item 5210, electronic relay item 5552 as well as control module for light block signals item 5221. In analogue mode controls the panel the control module for light signals items 5224, 5229 and 52292 when 2-aspect signals are connected. Several panels may be connected. Contact rating: Up to 2 A.
In stock: 4 on the shelf, shipped within 1-3 days
Classic park lamp. Prototypical brass mast with base socket for easy mounting. Height: 5,6 cm.
In stock: 4 on the shelf, shipped within 1-3 days
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 4,9 cm.
In stock: 4 on the shelf, shipped within 1-3 days
With prototypical brass mast. Suitable for platform epoch V. Original is located at renovated DB railway stations. Height: 10,5 cm.
In stock: 4 on the shelf, shipped within 1-3 days
Prototypical brass mast with base socket for easy mounting. Favourable set with 6 lights item 6140 for the price of 5. Maintenance free by LED lighting. Height: 8,7 cm.
In stock: 4 on the shelf, shipped within 1-3 days
Maintenance free by LED lighting. To illuminate buildings, valuable monuments, advertising boards, mounting on funfair models or as stage projector. All spots are movable up-, down- and backwards. Spot box: L 0,55 x W 0,45 cm. Height with frame: 0,7 cm. Suitable for H0, TT and N gauge.
In stock: 4 on the shelf, shipped within 1-3 days
To clip cables with an external diameter of (Ø of insulation) of 1 mm.
In stock: 4 on the shelf, shipped within 1-3 days