Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
H0 Whip street light, LED white, kit
Viessmann 6722 Scale H0
H0 Whip street light, LED white, kit

Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Street light epochs III – VI. Height: 10 cm.

Selling price: CHF 6.50 RRP CHF 7.20

In stock, shipped within 1-3 days

Screw Contact Terminal Strip
Brawa 3093
Screw Contact Terminal Strip

12 connections Two-part With socket strip 95 mm long Pluggable

Regular price: CHF 8.95

In stock, shipped within 1-3 days

Liliput Lamp
Brawa 3274
Liliput Lamp

DC 16 V/30 mA Yellow M 60.204

Regular price: CHF 2.70

In stock, shipped within 1-3 days

16mm x 25mm rectangular speaker, 4 Ohm, 1-2W
ESU 50330
16mm x 25mm rectangular speaker, 4 Ohm, 1-2W

Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber When selecting the loudspeaker the used decoder type is important. Depending on the decoder, different loudspeakers can be used as follows: LokSound V4.0 / 5 , LokSound micro V4.0 / 5 and LokSound V4.0 M4 decoders need the new speaker with an impendance of 4 Ohms . With the present 100 Ohms loudspeakers you would hardly hear anything. Conversely, you must never use the new 4 Ohms speakers with the previous LokSound V3.5 decoder. The decoder could be destroyed! When the decoder is replaced, the speaker must! be changed as well. Art.No. Delivery 50321 Loudspeaker 15mm x 11mm, 8 Ohms, with 4pc sound chamber kit 50325 Loudspeaker 16mm x 35mm square, 8 Ohms, 1~2W, with sound chamber 50326 Loudspeaker 14mm x 12mm square, 8 Ohms, 1~2W, with integrated sound chamber 50330 Loudspeaker 16mm x 25mm, rechteckig, 4 Ohms, with sound chamber 50331 Loudspeaker 20mm, round, 4 Ohms, 1~2W, with sound chamber 50332 Loudspeaker 23mm, round, 4 Ohms, 1~2W, with sound chamber 50333 Loudspeaker 28mm, round, 4 Ohms, 1~2W, with sound chamber 50334 Loudspeaker 20mm x 40mm, square, 4 Ohms, with sound chamber

Selling price: CHF 8.45 RRP CHF 8.90

In stock, shipped within 1-3 days

12% off the recommended price
Switch magnet circular
Fleischmann 942701 Scale N
Switch magnet circular

To activate the switch contacts 6435 and 9425 or the switching track 9115. To fix onto the underside of vehicles. Diametre: 5 mm, height 3 mm.

Selling price: CHF 4.30 RRP CHF 4.90

In stock, shipped within 1-3 days

10% off the recommended price
SILVERmini+ digital decoder, 500 mA, NEM651
Lenz Elektronik 10311-02
SILVERmini+ digital decoder, 500 mA, NEM651

The "SILVERmini+" locomotive decoder has a continuous current rating of 500 mA, with NEM651 interface plug, 2 function outputs, ABC, RailCom, and S.U.S.I. interface. Dimensions: 13 x 7.5 x 2.8 mm.

Selling price: CHF 40.90 RRP CHF 45.90

In stock, shipped within 1-3 days

Adapter Cable
Märklin 60124 Scale H0
Adapter Cable

Adapter cable 10-pin to 7-pin for connecting the Mobile Station 60653, the Mobile Station 60652 and the Trix Mobile Station 66950 to the 60125/60145 Terminal and a 3rd Mobile Station to the Central Station 60213-60215. Furthermore, for connecting a second Mobile Station 60652 to the 24088 feeder track or to the connector box 60115 (H0) or 60111 (Märklin 1).

Selling price: CHF 20.90 RRP CHF 22.99

In stock, shipped within 1-3 days

Extension Cable
Märklin 60126 Scale H0
Extension Cable

Extension cable for the main line with a 9-pin socket and a 9-pin plug for connecting a remotely located 60125/60145 Terminal. Length approx. 2 m.

Selling price: CHF 19.90 RRP CHF 21.99

In stock, shipped within 1-3 days

13% off the recommended price
märklin mLD3 LokDecoder
Märklin 60983 Scale H0
märklin mLD3 LokDecoder

For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder3 has a soldered-on wiring harness with an eight-pin NEM interface plug already fitted, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin LokDecoder3 supports the mfx, MM1, MM2 and DCC digital formats.

Selling price: CHF 44.90 RRP CHF 51.99

In stock, shipped within 1-3 days

13% off the recommended price
Control Box with a Feedback Function
Märklin 72710 Scale H0
Control Box with a Feedback Function

Model For switching 4 twin-coil solenoid accessories with automatic cutoff. Automatic feedback of the position by means of LEDs when using the 75491 (K) or 74491 (C) point motors as well as the Minitrix 14934 and 14935 point motors. With 8 sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7271 unit

Selling price: CHF 25.90 RRP CHF 29.99

In stock, shipped within 1-3 days

Fashion Shop with micro-motion Fashion Show
Noch 66501 Scale H0
Fashion Shop with micro-motion Fashion Show

NOCH’s Next Top Model! Roll out the red carpet and let's go: We are looking for the super model! The NOCH “Fashion store with micro-motion fashion show” is a fascinating highlight for your H0 scale model railway layout. This detailed laser-cut building brings urban flair and lively scenes to your model world. The set contains a precisely manufactured fashion house made of high-quality laser-cut material, which impresses with its fine structures and realistic coloring. The façade is designed with large shop windows that provide a view of the latest fashion collection. The integrated micro-motion technology is particularly impressive: four exclusive figures, equipped with magnets, move elegantly along the catwalk and present the latest fashions. A further four figures without magnets serve as decoration and liven up the scene even more. This set is an absolute highlight for model-making enthusiasts who value movement and attention to detail. The combination of high-quality laser-cut kit and innovative micro-motion technology makes this fashion store unique. It gives your model landscape a special dynamic and attracts attention. The most important product features at a glance: Scale: H0 (1:87) Contents: Laser-cut fashion house, 8 exclusive figures (4 with magnets), micro-motion drive, numbered certificate, detailed instructions, special laser-cut glue Special feature: Movable figures thanks to micro-motion technology Application: Ideal for creating urban scenes on the model railway layout The application is uncomplicated: The kit is assembled according to the enclosed instructions. The figures with magnets are placed in the positions provided and set in motion by the micro-motion drive. This creates a realistic fashion show that enriches your model world. Bring life and movement to your model landscape with the NOCH fashion store with micro-motion fashion show. This set impresses with its attention to detail, quality and innovative technology - a must for every model making enthusiast! The model is limited to 1000 pieces. A numbered certificate, detailed assembly and connection instructions and special laser-cut adhesive are included. Contents: - Laser-Cut Kit ‘Fashion Boutique’ - 8 exclusive Figures - 4 of them equipped with magnets Micro-motion drive Numbered certificate - Detailed instructions - Special Laser-Cut Adhesive

Selling price: CHF 266.00 RRP CHF 289.00

In stock, shipped within 1-3 days

14% off the recommended price
Reed contact switch
Roco 61193 Scale H0
Reed contact switch

With fault clearance to avoid switching spikes and with buffer protection. With all geoLine tracks, this potential-free switch contact can be fitted in the places intended for it. Operated by magnet 42256. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

Selling price: CHF 9.90 RRP CHF 11.60

In stock, shipped within 1-3 days

Locomotive decoder for 6-pin NEM interface
Trix 66841
Locomotive decoder for 6-pin NEM interface

Decoder for all DC locomotives with a current consumption of up to 1000 mA (motor 1000 mA, lighting 200 mA). Suitable for digital locomotives with a 6-pin digital interface to NEM. Universally usable in Selectrix 1, Selectrix 2 and DCC format. Automatic analogue detection. Same locomotive address in Selectrix and DCC operation up to locomotive address 99. 7 adjustable maximum speeds. 4 adjustable motor pulse variants. Automatic load compensation. Connection for lighting function. Connection for additional functions (Aux1 and Aux2). Short-circuit protection of the motor output. Programming of additional settings by selecting address "00", e.g. fine graduation of the pulse widths (control variant), polarity reversal of the direction of travel. in Selectrix operation: 31 speed steps. 111 addresses. Braking mode with brake diode. in DCC operation: Manual speed step selection 14/28 steps. Automatic switchover to 128 speed steps. Addresses optionally short up to 127 and long up to 9999. Braking mode with DC voltage braking generators (with analogue detection switched off) and "broadcast-mode" braking generators. Dimensions approx. 14 x 9 x 2.5 mm.

Regular price: CHF 20.00

In stock, shipped within 1-3 days

High-current cable 0,75 mm², yellow, 10 m
Viessmann 6897
High-current cable 0,75 mm², yellow, 10 m

Litz very flexible. Especially suitable for digital layouts.

Regular price: CHF 11.50

In stock, shipped within 1-3 days

Junction Block, 5 Connections
Brawa 2591
Junction Block, 5 Connections

Junction Block, 5-way 2-pin Diameter 2.5 mm

Regular price: CHF 12.80

In stock: 5 on the shelf, shipped within 1-3 days

Spherical-head Bulb, E 5.5
Brawa 3319
Spherical-head Bulb, E 5.5

DC Clear 8 mm 19 V / 60 mA

Regular price: CHF 1.70

In stock: 5 on the shelf, shipped within 1-3 days

Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material
ESU 51805
Servo drive with metal gear mechanism, microcontroller, 30 cm cable harness, fixing material

Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit ESU proudly presents a further, newly-developed servo motor for all ambitious model railway fans. The „Precision Servo Motor - Metal“ is preferred by all model railroaders who look for a powerful servo with metal gearing. Thanks to its metal gearing the servo is able to lift nearly twice the load (1.8 kg) of its plastic gearing brother. Moreover, the „Precision Servo Motor - Metal“ is appropriate for all situations in which splicing and beating claim high mechanical requirements from the servo and where the sound development does not play such an important role. With the same measurements as the Precision Servo Motor, the metal gearing is also equipped with the new, micro-processed control electronics for a precise, sensitive heading to the required position. Therefore the impuls suppression makes sure that there won´t be any tremors on the layout when you switch it on. The 30cm cables makes easy wiring possible. Also, the „Precision Servo Motor - Metal“ comes with innovative and well-proven accessories such as a servo holder and controlling wires. Art.No. 51805 Servo Motor, precision mini-servo, micro-controlled with metal gearing, incl. mounting kit

Regular price: CHF 23.90

In stock: 5 on the shelf, shipped within 1-3 days

Lighting fixture LED, cold white
Faller 180668 Scale H0
Lighting fixture LED, cold white

Improved! A better colour temperature and luminous efficiency as well as a larger angle of radiation ensure a particularly homogeneous illumination of building models. In FALLER kits the optimized cap accurately adapts to the provided holders. 12-16 V, AC/DC.

Regular price: CHF 2.50

In stock: 5 on the shelf, shipped within 1-3 days

Micro-cable bulb, yellow
Faller 180673 Scale H0
Micro-cable bulb, yellow

The FALLER micro cable bulbs (12-16 V, AC/DC, 35 mA) are suitable for the ideal lighting of all fairground booths and rides in the colours:

Regular price: CHF 3.90

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
m 83 Decoder
Märklin 60832 Scale H0
m 83 Decoder

Model Receiver for controlling points, signals and uncoupling tracks. The m 83 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 83 has 8 outputs, each of which can be controlled separately or in pairs. The default setting is for controlling up to 4 points. Other functions include switching up to 8 lights (dimmable) with a defined switch-on behaviour (e.g. street lighting, building lighting). An external power feed, e.g. by means of the 66360, can be implemented, only in conjunction with the 60822. The m 83 and m 84 decoders can be connected in any sequence. One 60821 accessory set is required per pair of outputs for motorised drives. The connections are made by means of lift terminals. The maximum current-carrying capacity is 3A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated

Selling price: CHF 62.90 RRP CHF 72.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
m 84 Decoder
Märklin 60842 Scale H0
m 84 Decoder

Model Receiver for switching continuous current on and off for lighting, motors, Hobby colour light signals (74371, 74380, 74391) and other electrical accessories. The m 84 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 84 contains 8 relays in 4 electrically isolated groups for switching loads. By using a 66360 power supply, the bistable state of the relays and the storage of the switch setting can be implemented. 4 Hobby colour light signals and 4 Hobby distant signals can be controlled, with the option of switching the track current at the same time. The m 84 also contains 8 inputs for switching the relays manually (similar to the 7244 remote switch). The m 83 and m 84 decoders can be connected in any sequence. The connections are made by means of lift terminals. The maximum current-carrying capacity per group is 5A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated

Selling price: CHF 85.90 RRP CHF 99.99

In stock: 5 on the shelf, shipped within 1-3 days

13% off the recommended price
s 88 DC Decoder
Märklin 60882 Scale H0
s 88 DC Decoder

Model Feedback module with current sensors for layouts with a two-rail supply. Can be plugged into the L 88 (60883) with the connecting cable included. Connection socket for another s88 DC decoder (60882). 2x 8 inputs for current sensors (with optocouplers) in 2 different circuits can be combined into one circuit with 16 inputs. The L 88 (60883) is required for connecting s88 feedback units to the CS2 or CS3! Highlights All connections with lift terminals With a network cable

Selling price: CHF 77.90 RRP CHF 89.99

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 SoundDecoderSteam Locomotive Sounds
Märklin 60975 Scale H0
Märklin mSD3 SoundDecoderSteam Locomotive Sounds

For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder mSD3 has a 21-pin 21mtc interface (to NEM 660) and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder mSD3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a steam locomotive.

Selling price: CHF 107.00 RRP CHF 125.00

In stock: 5 on the shelf, shipped within 1-3 days

14% off the recommended price
Märklin mSD3 SoundDecoderDiesel Locomotive Sounds
Märklin 60976 Scale H0
Märklin mSD3 SoundDecoderDiesel Locomotive Sounds

For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin SoundDecoder3 has a 21-pin interface and a matching interface board for retrofitting analogue and digital locomotives. The märklin SoundDecoder3 supports the mfx, MM1, MM2 and DCC digital formats. Preset sound of a diesel locomotive.

Selling price: CHF 107.00 RRP CHF 125.00

In stock: 5 on the shelf, shipped within 1-3 days