Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
13% off the recommended price
Point control switch+ FB
Roco 10520
Point control switch+ FB

Change over button with feedback function for four magnetic items switched off at the end (turnouts, semaphore signal, relays, etc.). Further switches can be plugged into the side.

Selling price: CHF 31.90 RRP CHF 36.90

On order, shipped within 10-15 days

10% off the recommended price
Switch with 4 buttons
Roco 10522
Switch with 4 buttons

Single action button for uncoupling tracks. Use this unit wherever power must be supplied for a short time. The individual buttons are electrically insulated and thus they can operate different power circuits.

Selling price: CHF 17.90 RRP CHF 19.90

On order, shipped within 10-15 days

13% off the recommended price
Changeover switch Feedback
Roco 10526
Changeover switch Feedback

Change over button with feedback. Change over button with feedback for single-slip turnouts and symmetric three-way turnouts. These two turnout designs require – if properly controlled – connections for the four possible turnout positions. The switch 10526 offers a definite control of the three permissible turnout settings. Additional switches can be connected side-by-side.

Selling price: CHF 31.90 RRP CHF 36.90

On order, shipped within 10-15 days

12% off the recommended price
Connector 5-pole
Roco 10605
Connector 5-pole

5-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.

Selling price: CHF 3.40 RRP CHF 3.90

On order, shipped within 10-15 days

13% off the recommended price
Connector 8-pole
Roco 10608
Connector 8-pole

8-pole connector, e.g. for 10777. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.

Selling price: CHF 5.10 RRP CHF 5.90

On order, shipped within 10-15 days

13% off the recommended price
Connector 16-pole
Roco 10616
Connector 16-pole

16-pole connector. The ROCO flat cables/plugs are easy to connect without soldering or screws. ROCO electrical/electronic articles are adapted to the use of these flat plugs. The plugs may only be processed with the original ROCO flat cables.

Selling price: CHF 8.60 RRP CHF 9.90

On order, shipped within 10-15 days

10% off the recommended price
Flat ribbon cable 3-pole
Roco 10623
Flat ribbon cable 3-pole

3-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m

Selling price: CHF 17.90 RRP CHF 19.90

On order, shipped within 10-15 days

13% off the recommended price
Flat ribbon cable 5-pole
Roco 10625
Flat ribbon cable 5-pole

5-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m

Selling price: CHF 31.90 RRP CHF 36.90

On order, shipped within 10-15 days

13% off the recommended price
Flat ribbon cable 8-pole
Roco 10628
Flat ribbon cable 8-pole

8-pole flat ribbon cable. Conductor cross section 0.2 mm². Length 10 m

Selling price: CHF 38.90 RRP CHF 44.90

On order, shipped within 10-15 days

10% off the recommended price
Extension lead X-Bus
Roco 10754
Extension lead X-Bus

Highly flexible 6-pole spiral cable. Connection between Z21 multiMAUS (10835, 10810) and 10820, 10822, 10815, 10764. Suitable for the FLEISCHMANN multiMAUS from the digital Starter Sets.

Selling price: CHF 17.90 RRP CHF 19.90

On order, shipped within 10-15 days

12% off the recommended price
Databus distributor module
Roco 10758
Databus distributor module

4-pin data bus distributor module. To connect further input units (for example Lokmaus or Z21 multiMAUS). This distributor module can also be used as an extension of existing lines to units on the slave output. Note: The cable of the Master Lokmaus should not be extended in order to avoid impairing the quality of the data transmission.

Selling price: CHF 13.90 RRP CHF 15.90

On order, shipped within 10-15 days

13% off the recommended price
Z21® multi LOOP
Roco 10797
Z21® multi LOOP

Z21 multi LOOP The Z21 multi LOOP reverse loop module is ideal for the comfortable and safe operation of track layouts such as terminal loops, triangular junctions and turntables. Operation modes: short-circuit detection - easiest wiring sensor tracks - short circuit free detection switching contacts - detection via circuit tracks or reed contacts combined operation - double safety Compatible with DCC MM RailCom analogue mode Note on sensor tracks / sections! Since sensor tracks / sections are not themselves supplied with power, they must not be too long, especially with regard to short, slower locomotives. Ideally they should be between 4.0 and 5.5 cm long in H0 and 2.0 to 3.0 cm in N. RailCom is a registered trademark of the Lenz Elektronik GmbH, Gießen.

Selling price: CHF 86.90 RRP CHF 99.90

On order, shipped within 10-15 days

13% off the recommended price
Train controller plug-in power supply
Roco 10798
Train controller plug-in power supply

Train controller and plug-in power supply. This controller set is best suited for beginners and running just one train. It consists of one controller and plug-in power supply, designed to compliment each other. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. Easy connection to the layout using the pressure connection clips. Technical data: Running voltage: 0–14 V=/0.6 A Separate accessory output: 14 V=/0.85 A Automatic overload protection Regulator with zero point setting

Selling price: CHF 86.90 RRP CHF 99.90

On order, shipped within 10-15 days

12% off the recommended price
CAN Bus HUB
Roco 10804
CAN Bus HUB

Z21 CAN HUB Additional 2 A power supply for CAN BUS 3 CAN outputs 1 Z-CAN output with booster signal amplification Ideal for large track layouts with many CAN users The package also contains a connecting cable for CAN bus

Selling price: CHF 73.90 RRP CHF 84.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 Light Booster
Roco 10805
Z21 Light Booster

Z21 light BOOSTER Power 3 A (track output) RailCom cutout (allows use of RailCom-track occupied detector) Terminal loop feature with short-circuit detector Connection via B bus (ideal also for multiZENTRALEpro), replaces Booster 10765 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 113.00 RRP CHF 129.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 Booster
Roco 10806
Z21 Booster

Z21 single BOOSTER Power 3 A (track output) Adjustable track voltage via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Configurable terminal loop feature with short-circuit detector Brake generator feature configurable Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Matching power supply: 10851 Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 217.00 RRP CHF 249.90

On order, shipped within 10-15 days

12% off the recommended price
Z21 Dual Booster
Roco 10807
Z21 Dual Booster

Z21 dual BOOSTER Power 2x 3 A (track outputs) Voltage can be set for both track outputs separately via app or PC via Z21 (12–24 V) RailCom global detector (allows POM reading in the booster section) Terminal loop feature can be separately configured by means of short-circuit detector Brake generator feature can separately configured for both Connections via CAN bus, B bus, CDE bus Configuration and update simply by PC via CAN Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 244.00 RRP CHF 279.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 Detector
Roco 10808 Scale H0
Z21 Detector

Z21 DETECTOR Track-occupied detector for 8 sections Occupied message by means of power monitoring of track sections RailCom-detector for loco identification when using the CAN bus Connection via CAN bus or R bus Configuration via button or CAN Occupied/feedback with momentary contact Includes connection cable for R-Bus/CAN RailCom is a registered trademark of Lenz Elektronik GmbH.

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

12% off the recommended price
WiFi-Package+Z21 App
Roco 10814 Scale H0
WiFi-Package+Z21 App

z21 WLAN Package The z21 start can be extended to a network-enabled control center by using Access Point and an activation code. You can easily control both trains as well as turnouts with your Smartphone or tablet via the popular Z21 App. Self-explanatory control functions for your model railway layout (through icons, image integration etc.) You can automate routes Control your locomotives with photorealistic driver’s cabs for the ultimate driving experience – feel like a real locomotive driver It lays the basis for PC guided automations (e.g. with Rocrail®, iTrain®, TrainController® etc. Click HERE for more information! The z21 WLAN Package contains a preconfigured router and the activation code for the z21 start. This way the z21 start can accept commands for locomotives and turnouts via the WiFi interface and process them. Go here for your: Unlock code Info: system requirement is a Windows PC or notebook as well as an existing Internet connection (only for activation of the Unlock code). Please also note our video: Activation of the z21 start with the z21 WLAN package Contents: WiFi Router Switching power supply Unlock code Manual

Selling price: CHF 43.90 RRP CHF 49.90

On order, shipped within 10-15 days

13% off the recommended price
Z21® CAN HUB
Roco 10819
Z21® CAN HUB

Z21 DETECTOR x16 Track occupancy sensor for 16 track sections Occupied signal is triggered by the power monitoring of the track sections Connection via R-Bus Configuration via buttons or POM CV programming

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

12% off the recommended price
DigitalControlCenter Z21R
Roco 10820
DigitalControlCenter Z21R

The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go! Activation code not required! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply 10851 pre-configured WiFi router for Plug & Play operations incl. switching power supply 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shope as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 435.00 RRP CHF 499.90

On order, shipped within 10-15 days

12% off the recommended price
DigitalControlCenter Z21R
Roco 10822
DigitalControlCenter Z21R

The Z21 digital control centre connects your model railway system, your digital locomotives and wagons via WiFi to your tablet, smartphone or the Z21 WLANMAUS. No additional networking knowledge is needed for this. You can extend your Z21 digital control centre easily due to the large number of interfaces. This also makes it the ideal basis for PC-based automation. Features: Intuitive operating concept for beginners and pros, control of the model railway locomotives through virtual, photorealistic drivers' cabs of different types of vehicles. you can also easily manage and administrate large train fleets multi-protocol center for DCC and Motorola formats upgrade for existing digitally controlled layouts through backwards compatibility, i.e. Z21 multiMAUS, Lokmaus 2 switching of turnouts and soleonids RailCom compatible software and sound of our ZIMO-Sound-Decoders can be updated at anytime Connection of Smartphone, Tablet-PC, Z21 WLANMAUS, Z21 multiMAUS Plug & Play - connect and you are ready to go ! Camera locomotives via Z21 app Integrated interface for connecting a PC you can easily connect to your Smartphone via pre-configurated WiFi router Connections: 3 times X-Bus main track for DCC and Motorola, 3 A, feedback enabled separate programming track: for programming, decoder updating, sound programming. Feed back enabled. Booster-Bus for Roco Booster 10765, 10805, 10806, 10807, CDE-Booster via 10789 Roco-Feedback Bus for Roco Feedback module 10787 LAN-Bus, CAN-Bus and LocoNet-Bus Sniffer Bus Dimensions of Z21: 207 mm x 146 mm x 37 mm. Dimensions of router: 174 mm x 144 mm x 30 mm. Contents of delivery: Z21 digital control centre switching power supply with NEMA connector pre-configured WiFi router for Plug and Play operations incl. switching power supply with NEMA connector 3 back plug terminal RM3,5 2p Manual You can order the back plug terminal RM3,5 2p (Item 96321) at your online shop as a spare part. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.

Selling price: CHF 435.00 RRP CHF 499.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 multiMAUS
Roco 10835
Z21 multiMAUS

Z21 multiMAUS Economically priced operating device with many possibilities. Several Z21 multiMAUS devices can be operated on the system at the same time. Brightness-adjustable display. Up to 9,999 locomotive addresses can be operated with direct input; 64 can be stored in a data bank and labeled with names: for example 103RB (103 red-beige). Per locomotive up to 31 functions (including headlights) can be activated if the model has been equipped accordingly. The locomotives can alternatively be operated with 14, 28 and 128 driving levels; on the one hand, this can be set in principle, on the other hand, it can be changed as required for each locomotive. With two different ways of programming you can adjust your locomotive decoder according to your own wishes: The most important CV values from 1 to 5 are accessible with the button combination “MENU” and 1–5, the total of 1024 possible CV values can be addressed with the programming menu. Of course, depending on the decoder configuration, all values up to 255 can be programmed. Readout of CV 1 - 1024 possible in connection with Z21 or readout capable digital control centre. Turnout mode: The Z21 multiMAUS can switch up to 2,048 magnetic devices. These elements have to be equipped with an electric device and be connected to a magnetic device decoder. The programming of the magnetic device decoder is done electronically via the tracks. Supported data transfer protocol: X-Bus 4.0 Slave Firmware updateable Contents: Z21 multiMAUS Connection cable Manual

Selling price: CHF 104.00 RRP CHF 119.90

On order, shipped within 10-15 days

13% off the recommended price
Z21 switch decoder
Roco 10836
Z21 switch decoder

Z21 switch DECODER The Z21 switch DECODER is an universally applicable DCC switching decoder with a power output of 2 Amperes for up to 8 turnouts or up to 16 elements such as LEDs and bulbs. Simple connection A separate DC supply can be connected so that the control centre or booster outputs are not placed under unnecessary load. If the wiring should be as simple as possible, the rail signal can also be used as a supply. In addition, the outputs are protected against overload and short-circuits. Adjustable outputs Each of the 8 output pairs can be set to different modes independently of the other. These are already pre-configured and can simply be selected. Each output pair can also be individually dimmed so that lighting can be adapted precisely to requirements. It perfectly can be combined with twin coil motors simple light signals all kind of illumination the control of relays Highlights: 8 output pairs can be set independently Optional power supply via extra applied switching power supply Programmable with RailCom on the main track (POM) Short-circuit protection against overload Updateable Adjustable modes Standard operation - with configurable cut-in time for twin coil motors Instantaneous operation - for turnouts and uncouplers. Can be be activated with a manual controller depending on the operating time (see also 10775) Bistable continuous operation - Switching on or switching over of the lighting and signals Bistable continuous operation - Switching on or switching over with light bulb simulation Alternative flash Alternative flash with light bulb simulation Item numbers of switches 1-2040 RailCom is a registered trademark of the company Lenz Elektronik GmbH, Gießen.

Selling price: CHF 77.90 RRP CHF 89.90

On order, shipped within 10-15 days