Electronics
Switching power supply 36 Watts Ideal for Z21 CAN HUB and z21 start. Protection against: Overload Short circuit Over-tension
On order, shipped within 10-15 days
Switching power supply 54 Watts. Ideal for Z21, z21, Z21 single BOOSTER, Z21 light BOOSTER. Protection against: Overload Short circuit Over-tension
On order, shipped within 10-15 days
Switching power supply 120 Watts. Ideal for Z21 dual BOOSTER and Z21 XL BOOSTER. Protection against: Overload Short circuit Over-tension Overtemperature
On order, shipped within 10-15 days
USB switching power supply 5 watts. With USB-A to Micro-USB-B cable. Ideal for Z21 pro LINK (item no.10838)
On order, shipped within 10-15 days
Z21 XL BOOSTER The Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. The advantages of the Z21 XL BOOSTER Output voltage 6 A at 20 V Track format DCC and Motorola B-BUS CAN-BUS CDE interface RailCom receiver and transmission to control centre (CAN) Forwarding of short-circuits to control centre (adjustable) Firmware update (CAN) RailCom cut-out, adjustable Motorola is a registered trade name of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
On order, shipped within 10-15 days
Z21 XL Series The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters. The benefits at a glance More output voltage with 6 A at 20 V Control via WLAN provides high range and transmission security Convenient Z21 App and Z21 WLANMAUS for the control of your entire system Included: Z21 XL Series digital control centre Power supply unit and cable 6 A 20 V (10857) WLAN router & power supply unit
On order, shipped within 10-15 days
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom function. Maximum motor current: 0.7 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
With this speaker set you can retrofit any sound. Complete set with sound box and connection cables. Ideally adapted to Zimo sound decoders. Dimensions: 10 x 15 x 9 mm Content: 2 pieces/package.
On order, shipped within 10-15 days
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Suitable for Gauge H0 and TT. Decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual .
On order, shipped within 10-15 days
Decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.0 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen. Answers to possible questions can be found in this Zimo manual
On order, shipped within 10-15 days
H0e track connecting cable without radio suppression.
On order, shipped within 10-15 days
Universal lighting kit for 4-axled H0 wagons. Assembly kit: Contains a 300 mm flexible strip conductor, 5 bulb carriers, 5 bulbs 16 V/22 mA, 2 wheel current pick-up contacts, fastening material. Any number of bulb holders can be mounted in any position on the circuit board, which can be shortened to length. No soldering required. The set is also suitable, e. g. for illuminating station platforms.
On order, shipped within 10-15 days
Universal lighting kit for 2-3-axled H0 wagons. Assembly kit: Contains a 150 mm flexible strip conductor, 2 bulb carriers, 2 bulbs 16 V/22 mA, 4 wheel current pick-up contacts, fastening material. Any number of bulb holders can be mounted in any position on the circuit board, which can be shortened to length. No soldering required.
On order, shipped within 10-15 days
LED universal lighting kit for 4 axle H0 wagons. Universal lighting set for passenger wagon with a length from 170 up to 316 mm. For the operation of the Lighting set, it is necessary to use the base board with a length of 145 mm with the control electronics. The 6 LED modules with a warm white LED each can be optionally positioned on the carrier board so that an adaption to the interior is possible. The carrier board can be shortened from 296 mm to 250, 170 or 145 mm, nevertheless, the power supply from both sides is possible. It can be used in analogue as well as digital operation with AC or DC. With 16 pin PluX interface. The LED modules can be switched in groups in digital operation.
On order, shipped within 10-15 days
LED interior lighting for TT coaches. The light strip works with many different model railways, regardless of whether you are an analogue (DC or AC) or digital (DCC/Motorola II) railway enthusiast. The integrated multiprotocol decoder enables special lighting effects and additional functions. Automatic detection and switching of operating modes Brightness adjustment optionally with potentiometer or CV setting Integrated constant current source for constant brightness from approx. 7 volts 6 integrated LEDs (warm white), 2 connections for additional LEDs Maximum driving voltage in digital mode: 21 volts Dimensions: 186 x 8 x 2.64 mm; can be shortened to 68 mm
On order, shipped within 10-15 days
Connection terminal. Connection terminal for connection to straight track G121 or curved track R130. Note: There is an anti-interference capacitor in the junction box. It must be removed when using a digital control unit!
On order, shipped within 10-15 days
Feed-in power element for digital DCC operation. It can be connected to any straight or curved track element at the point designated from the factory.
On order, shipped within 10-15 days
With automatic shuttle train control For all DC models 12 V = Almost constant operating voltage as pulsed square-wave voltage Output current max. 1 A Automatic cut-out in the event of short circuit and overload Power supply by energy-efficient switched-mode power supply (included in the delivery) Console housing that can be joined side by side, dimensions approx. 138 x 80 x 40 mm Properties and functions as in digital operation Excellent running characteristics over the entire speed range Extremely slow running possible Linear speed increase over the entire control range or alternatively 4 different non-linear control curves to choose from Braking to a standstill and starting off again with braking/starting delay at the touch of a button Pulse width control in a new dimension Almost constant LED lighting of the models, even at slow speed Direction-dependent LED lighting of the locomotives despite pulsed voltage Convenient operation Speed control by rotary knob with long travel (270°) Power display as a ring-shaped LED band corresponding to the controller position Direction of travel changed by toggle switch Direction of travel indicated by different colours in the power display With automatic shuttle train control Automatic shuttle train operation without additional relay circuit (with track contacts with diode wiring - circuit board item no. 08401/switching tracks 83158/83758) Any number of intermediate stops in shuttle train mode Automatic activation of the preset braking or acceleration time and of the stopping time Automatic function can be switched off
On order, lead time to be confirmed
in red, blue, black and yellow (10 m each)
On order, lead time to be confirmed
function decoder
On order, lead time to be confirmed
Digital decoder with plug according to NEM 651
On order, lead time to be confirmed