Electronics
Digital decoder with 6-pin cable
On order, lead time to be confirmed
PluX 12 decoder to NEM 658
On order, lead time to be confirmed
PluX 12 decoder to NEM 658
On order, lead time to be confirmed
Decoder Next18 to NEM 662
On order, lead time to be confirmed
Decoder Next18 to NEM662
On order, lead time to be confirmed
Next18 digital decoder
On order, lead time to be confirmed
Decoder Next18 NEM 662
On order, lead time to be confirmed
Next18 decoder for V100 diesel locomotive
On order, lead time to be confirmed
The sound module without a decoder (speaker / components) is for individual retrofitting of locomotives that are prepared for the installation of a speaker (15.0 x 11.0 x 3.50mm / 8 Ohm).
On order, lead time to be confirmed
Sound module E94, includes:
On order, lead time to be confirmed
TILLIG Programmer
On order, lead time to be confirmed
Switched-mode power supply for connecting or supplying the 60114 or 60116 track box. Input 230 V/50 Hz / output 15 V/30 W DC voltage (especially for Minitrix). Plug-in power supply in a plastic housing with toy approval. Connection: barrel socket 5.5/2.5 mm, positive pole inside. The 66510 switched-mode power supply is intended for use in dry rooms.
On order, shipped within 10-15 days
Model For Minitrix coaches with a length over the buffers of 165 mm (coaches based on the Silberlinge are an exception) and with current drawn from one conductor per bogie. With a connection socket for coaches with a lighted tail signal from the 2025 production year on. Consisting of an LED light strip (warm white) and pickup springs. The LED light strip is fitted with an electrolytic capacitor for buffering power (flicker protection) and a dimmer (potentiometer). Highlights Low current draw Flicker protection Dimmable
On order, shipped within 10-15 days
Model For Minitrix driving trailers from the 2021 production year on. Consisting of an LED light strip (warm white). The LED light strip is fitted with an electrolytic capacitor for buffering power (flicker protection) and a dimmer (potentiometer). Highlights Low current draw Flicker protection Dimmable
On order, shipped within 10-15 days
Model For Minitrix coaches with a length over the buffers of 165 mm (coaches based on the Silberlinge are an exception) and with current drawn from one conductor per bogie. Consisting of an LED light strip (warm white) and pickup springs. The LED light strip is fitted with an electrolytic capacitor for buffering power (flicker protection) and a dimmer (potentiometer). Highlights Low current draw Flicker protection Dimmable
On order, shipped within 10-15 days
Model For all Minitrix coaches with current drawn from one conductor per bogie. Consisting of an LED light strip (warm white) that can be shortened and pickup springs. The LED light strip is fitted with an electrolytic capacitor for buffering power (flicker protection) and a dimmer (potentiometer). Highlights Low current draw Flicker protection Dimmable
On order, shipped within 10-15 days
Model For all Minitrix coaches with current pickup from one conductor per bogie. Consisting of a shortenable LED light strip (sunny yellow, for earlier eras) and pickup springs. The LED light strip is fitted with an electrolytic capacitor for energy buffering (anti-flicker protection) and a dimmer (potentiometer). Highlights Low current draw Anti-flicker protection Dimmable
On order, shipped within 10-15 days
Model For 4-axle Minitrix rebuilt coaches. Consisting of an LED light strip (warm white) with an integrated red LED for optionally lighting the tail signal. The LED light strip is fitted with an electrolytic capacitor for energy buffering (anti-flicker protection). Minitrix rebuilt coaches already come from the factory with the appropriate wheel pickup contacts. Highlights Low current draw Anti-flicker protection Red tail signal
On order, shipped within 10-15 days
Model Current feed for the 73410 and 73411 retrofit interior lighting kits, consisting of one axle bearing with a soldered-on wire and socket and one axle bearing with a soldered-on wire and plug for the electrical connection. Can be used for the standard design four-axle express train passenger cars from 1928 to 1930 with symmetrical truck mountings. Note With this current feed, for example the Märklin express train passenger cars 42500 to 42540 can be equipped with LED interior lighting using the appropriate DC wheel sets.
On order, shipped within 10-15 days
Prototype Receiver for all DC locomotives with a total current draw of up to 1000 mA (motor 1000 mA, 200 mA per light). Suitable for digital locomotives with an mtc14 digital interface. Universally usable in the Selectrix 1, Selectrix 2, and DCC formats. Automatic analogue detection. Automatic load control. Connection for the light function. Connection for auxiliary functions (Aux1 and Aux2). Short-circuit protection for the motor output. Extended Selectrix 1 programming of additional settings by selecting the address "00", e.g. finer graduation of the pulse widths (control variant), reversal of the direction of travel. In Selectrix operation: 31 speed levels. 111 addresses. DCC operation: choice of 14/28/126 speed levels. Addresses optionally short up to 127 and long up to 10239. Braking operation in the DCC and SX formats: DC same/opposite polarity, braking diodes, asymmetrical track signal, braking generators. Dimensions approx. 14 x 9 x 2 mm. Model Robust multi-protocol retrofit decoder, short-circuit-proof between motor and track, safety shutdown in the event of overcurrent, excess temperature, and short circuit, newly developed motor control for extremely smooth operation of all common DC motors, continued running at the same speed after a power interruption of up to 1s, SUSI-controlled starting delay (SUSI-WAIT), one- or two-part braking sections, special characteristics in analogue operation: starting voltage adjustable to a very low level, Vmax limitation, dynamic dimming of the lights and AUX depending on the running voltage, programmable functions, typically analogue running behaviour.
On order, shipped within 10-15 days
Consisting of 5 rewritable chip cards with memory space for all of the functions and settings for a locomotive, or for quickly loading and calling up the locomotive on the Central Station 60213-60215 or 60216/60226 and on the Mobile Station 60653/60657 or T66950/T66955.
On order, shipped within 10-15 days
Model Digital DCC hand controller unit. 40 locomotives can be controlled with direct access. Up to 32 locomotive functions and 320 solenoid accessories can be controlled. The function statuses are shown on the integrated backlit black-and-white full graphics display. Integrated locomotive card reader. Red illuminated stop button. 1.9 A power section in the optionally available track box (60116 or 60113). 2 Mobile Stations (60955) can be connected directly to one track box (60116 or 60113); they then work together in master-slave mode. By using MS II hubs (60122) the number of controllers in use can be increased to up to 10. When the Mobile Station is operated on the Central Station (60216, 60226 as well as 60214-60215), the Central Station settings (the complete locomotive list of the Central Station, all solenoid accessories of the Central Station keyboard with their designations) can be accessed. Dimensions 160 x 100 x 39 mm. Highlights DCC control unit for simple, comfortable operation Backlit graphics display with self-explanatory pictograms Up to 32 controllable additional functions. 320 solenoid accessories can be controlled Integrated locomotive card reader Simple wiring (Plug & Play) to the track box and the Central Station
On order, shipped within 10-15 days
The LocoNet-Tool program allows you to conveniently program and read out LNCVs (= LocoNet Configuration Variables) of LocoNet modules on your computer. For most LocoNet modules, there are special input masks. You receive comfortable programming support through explanatory texts that explain all setting options, so that in many cases you can manage without the operating instructions for the relevant module.
On order, lead time to be confirmed
The LocoNet-Tool software allows you to program and read out LNCVs (= LocoNet Configuration Variables) of LocoNet modules on your computer. For most LocoNet modules, there are special input masks. You receive comfortable programming support through explanatory texts that explain all setting options, so that in many cases you can do without the operating instructions of the respective module.
On order, lead time to be confirmed