Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Electronics

Command stations, decoders, boosters and wiring for digital control, whatever your system.
Filter products
8-pin IntelliSound 6 mini decoder with sound
Uhlenbrock 33324
8-pin IntelliSound 6 mini decoder with sound

The IntelliSound 6 decoder is a combination of an IntelliDrive locomotive decoder with an IntelliSound 6 module.

Selling price: CHF 82.90 RRP CHF 91.70

On order, lead time to be confirmed

10% off the recommended price
Next18 IntelliSound 6 minidecoder, empty
Uhlenbrock 33330
Next18 IntelliSound 6 minidecoder, empty

The IntelliSound 6 decoder is a combination of an IntelliDrive locomotive decoder and an IntelliSound 6 module.

Selling price: CHF 72.90 RRP CHF 81.50

On order, lead time to be confirmed

Next18 IntelliSound 6 minidecoder with sound
Uhlenbrock 33334
Next18 IntelliSound 6 minidecoder with sound

The IntelliSound 6 decoder is a combination of an IntelliDrive locomotive decoder with an IntelliSound 6 module.

Selling price: CHF 82.90 RRP CHF 91.70

On order, lead time to be confirmed

10% off the recommended price
Sound Director
Uhlenbrock 38000
Sound Director

Now you can play your own soundscape on your model railway, whether analogue or digital. Put together the corresponding MP3 files on your computer and save them on the USB stick supplied. As soon as the USB stick is connected to the Sound-Director, the individual sounds can be called up. Background sounds, such as station ambience, street and construction noise or animal voices, are played in an endless loop. Sounds, such as church bells, emergency vehicle sirens or station announcements, can be triggered individually by push button, switch contact, reed contact, via the random generator or at specific times. When connected to LocoNet, sounds can also be triggered by a moving train via feedback modules, point commands or the LISSY or MARCo system. In the LISSY or MARCo system, a train can even call up its own station announcement, valid only for it. In this way more than 600 sounds can be called up from the playlist. With all other systems and in analogue operation, over 400 sounds are available. They can run in endless loops or be called up by 10 contacts, the random generator or the model time clock. The Sound-Director is supplied complete with two small speakers. Alternatively, PC speaker boxes can also be connected directly to the built-in jack socket. The USB stick supplied provides a large selection of immediately playable sounds. Art. no.: 38000 SoundDirector

Selling price: CHF 156.00 RRP CHF 173.80

On order, lead time to be confirmed

USB stick with sounds and sound director
Uhlenbrock 38010
USB stick with sounds and sound director

The USB stick provides a wide selection of ready-to-play sounds.

Selling price: CHF 9.30 RRP CHF 10.30

On order, lead time to be confirmed

10% off the recommended price
MP3 sound module
Uhlenbrock 38110
MP3 sound module

The new MP3 sound modules are very inexpensive components for playing sounds on the model railway layout. Sounds on your computer, whether you have downloaded them from the internet or created them yourself, can be simply loaded into the sound modules via a USB interface. One sound can be stored per module. Sound module for quick use with all the necessary accessories For analogue and digital model railways No interface or programmer needed The sound can be played once or in an endless loop. The sound is triggered by push button, switch contact or reed contact. An opto-isolated input is available for connecting electronic contact sensors. Art. no. 38110 MP3 sound module

Selling price: CHF 42.90 RRP CHF 47.70

On order, lead time to be confirmed

3-channel MP3 sound module
Uhlenbrock 38130
3-channel MP3 sound module

The new MP3 sound modules are very inexpensive components for playing sounds on the model railway layout. Sounds on your computer, whether you have downloaded them from the internet or created them yourself, can be simply loaded into the sound modules via a USB interface. One sound can be stored per module. Sound module for quick use with all the necessary accessories For analogue and digital model railways No interface or programmer needed The sound can be played once or in an endless loop. The sound is triggered by push button, switch contact or reed contact. An opto-isolated input is available for connecting electronic contact sensors. Art. no. 38130 MP3 sound module

Selling price: CHF 58.90 RRP CHF 65.20

On order, lead time to be confirmed

10 1N4001 diodes
Uhlenbrock 40111
10 1N4001 diodes

Supplementary component for 41200 ABBS and 43400 GBM

Selling price: CHF 2.80 RRP CHF 3.10

On order, lead time to be confirmed

20 coupling resistors
Uhlenbrock 40311
20 coupling resistors

Supplementary component for 41200 ABBS and 43400 GBM

Selling price: CHF 2.80 RRP CHF 3.10

On order, lead time to be confirmed

Resistance lacquer 10 ml
Uhlenbrock 40410
Resistance lacquer 10 ml

For bridging axle insulation. This means that even coaches and wagons without lighting trigger an occupancy detection signal on the track sections monitored by the feedback module 63320. Danger Hazard statements H222: Extremely flammable aerosol. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. Precautionary statements P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P271: Use only outdoors or in a well-ventilated area. P410/412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. P501-2: Dispose of contents/container to an approved hazardous waste collection point.

Selling price: CHF 7.40 RRP CHF 8.20

On order, lead time to be confirmed

11% off the recommended price
GBM track occupancy detector with relay
Uhlenbrock 43400
GBM track occupancy detector with relay

Function The module provides reliable indication of stationary and moving trains on the track. It is also suitable for use as an electronic switch. The occupancy report detects any current from 1 mA in the section it monitors. It therefore responds to all locomotives and all coaches with lighting. It can switch lamps, LEDs, signals, points, relays or other modules, such as the Sounddirector.

Selling price: CHF 31.90 RRP CHF 35.90

On order, lead time to be confirmed

10% off the recommended price
Direction of travel changeover
Uhlenbrock 55500
Direction of travel changeover

The extremely small conversion module for converting any DC locomotive to AC operation guarantees safe, jerk-free switching. The locomotive headlights can be connected to change over with the direction of travel. The use of power transistors results in only a minimal voltage drop and therefore only slight heating. The converter is extremely immune to interference from voltage spikes and power interruptions.

Selling price: CHF 36.90 RRP CHF 41.30

On order, lead time to be confirmed

Intellibox Power 3 plug-in set (until end of September 2003)
Uhlenbrock 61040
Intellibox Power 3 plug-in set (until end of September 2003)

Item no. 61040 Plug-in set, replacement for Intellibox 650, 65000, 65050, Power 3 (until end of Sept. 2003), TwinCenter

Selling price: CHF 12.90 RRP CHF 14.30

On order, lead time to be confirmed

Plug-in set for Intellibox 3, Intellibox 2neo
Uhlenbrock 61065
Plug-in set for Intellibox 3, Intellibox 2neo

Item no. 61065 plug-in set, replacement for Intellibox 3 and Intellibox 2neo

Selling price: CHF 8.30 RRP CHF 9.20

On order, lead time to be confirmed

LocoNet cable 28 cm
Uhlenbrock 62015
LocoNet cable 28 cm

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 3.10 RRP CHF 3.40

On order, lead time to be confirmed

10% off the recommended price
LocoNet cable 2.15m
Uhlenbrock 62025
LocoNet cable 2.15m

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 4.50 RRP CHF 5.00

On order, lead time to be confirmed

10% off the recommended price
LocoNet spiral cable - approx. 2.6 m
Uhlenbrock 62035
LocoNet spiral cable - approx. 2.6 m

Loco-Net coiled cable. Please note that the length stated refers to the maximum length when stretched out. Depending on the delivery batch, this length can vary between 2.5 m and 3 m. Important note! Until now our LocoNet cables with plug/plug or socket/socket have been supplied in crossed form. That means: until now pin 1 was connected to 6, pin 2 to 5 and so on. In future they will be available in uncrossed (1:1) form, so pin 1 is connected to 1, pin 2 to 2 and so on. This has become necessary because of a new booster concept. These cables will replace the old cable version. Only when several Power 2 boosters are to be connected to one another via LocoNet are the existing crossed versions of the cables required. All other devices supplied until now (except Power 2) can be connected to one another with both types of cable. Nothing changes for branches and distributors, as these have always been supplied in uncrossed form.

Selling price: CHF 9.00 RRP CHF 10.00

On order, lead time to be confirmed

11% off the recommended price
LocoNet cable - 60 cm
Uhlenbrock 62045
LocoNet cable - 60 cm

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 3.20 RRP CHF 3.60

On order, lead time to be confirmed

LocoNet cable - 6 m
Uhlenbrock 62065
LocoNet cable - 6 m

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 7.40 RRP CHF 8.20

On order, lead time to be confirmed

10% off the recommended price
LocoNet branch - 2.15m
Uhlenbrock 62120
LocoNet branch - 2.15m

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 7.80 RRP CHF 8.70

On order, lead time to be confirmed

LocoNet coupling
Uhlenbrock 62225
LocoNet coupling

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to Pin 6, Pin 2 to Pin 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to Pin 1, Pin 2 to Pin 2, and so on.

Selling price: CHF 3.80 RRP CHF 4.20

On order, lead time to be confirmed

LocoNet distributor - 20 cm
Uhlenbrock 62250
LocoNet distributor - 20 cm

Until now, our LocoNet cables have been supplied with plug/plug or socket/socket connectors in a crossed configuration. This means that Pin 1 was connected to 6, Pin 2 to 5, and so on. From now on, they will be available in an uncrossed (1:1) configuration, meaning Pin 1 is connected to 1, Pin 2 to 2, and so on.

Selling price: CHF 12.90 RRP CHF 14.30

On order, lead time to be confirmed

11% off the recommended price
LocoNet distributor
Uhlenbrock 62261
LocoNet distributor

Four in one – distributor, patch panel, power feed, load indicator The LocoNet distributor offers you 6 LocoNet connections. You can screw it under your layout or integrate it into the layout frame with the front plate supplied. The LocoNet distributor works as a LocoNet power feed when the additional plug-in power supply 20206 is plugged in. Another 630 mA is then available at 3 LocoNet sockets of the distributor for the LocoNet T. The other connections remain LocoNet B or T, depending on which LocoNet output of the command station the distributor is connected to. Dimensions 70 x 40 mm, front plate 90 x35 mm Art. no. 62261 LocoNet distributor

Selling price: CHF 28.90 RRP CHF 32.50

On order, lead time to be confirmed

Luisa, LocoNet uncoupling, LocoNet repeater, distributor
Uhlenbrock 62280
Luisa, LocoNet uncoupling, LocoNet repeater, distributor

Luisa – LocoNet universal isolator, power supply and indicator. Luisa is a LocoNet repeater, galvanic isolator, power feed and distribution unit in one device: it generates a new galvanically isolated LocoNet branch via optocouplers, refreshes the signals and supplies power to the connected devices (12 V, total max. 500 mA). In the event of a short circuit in the second branch, the LocoNet in the primary branch remains fully operational. The integrated RS amplifier provides the signals for operating boosters on the LocoNet B branch. Multi-colour LEDs indicate LocoNet input and output, RS signal and load. Connections: LocoNet input, galvanically isolated LocoNet output (max. 50 mA), three LocoNet T sockets with power feed, DC socket for the supplied 12 V switched-mode power supply. This allows all Uhlenbrock LocoNet devices such as feedback modules and LocoNet boosters to be connected to LocoNet-capable central units with a non-common-return output stage (e.g. Roco Z21, Tams mc² MasterControl 2, KM1 System Control 9, DigiKeijs DR5000, YaMoRC Command Station, Viessmann Commander 2). Front panel 90 x 35 mm.

Selling price: CHF 64.90 RRP CHF 71.70

On order, lead time to be confirmed