Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

H0 and N rolling stock, lighting and cable cars

Brawa, model railways made with care

Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.

Choose a family See all items

  • 1375items in the shop
  • H0 and Nthe scales in the range
  • 1948the year of the founding
SBB K2 covered goods wagon

What makes Brawa

  • A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
  • Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
  • Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
  • Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.

Our favourites

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Wooden-mast Light, Pin-Socket, LED
Brawa 84124 Scale H0
H0 Wooden-mast Light, Pin-Socket, LED

1 x Wooden-mast Light, Pin-Socket (LED) Height 88 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 17.05

In stock, shipped within 1-3 days

H0 Platform Light, Pin-Socket, LED
Brawa 84049 Scale H0
H0 Platform Light, Pin-Socket, LED

1 x Platform Light, Pin-Socket (LED) Height 70 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.15

In stock: 5 on the shelf, shipped within 1-3 days

H0 Street Light, Pin-Socket, LED
Brawa 84013 Scale H0
H0 Street Light, Pin-Socket, LED

1 x Street Light, Pin-Socket (LED) Height 58 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 15.95

In stock: 5 on the shelf, shipped within 1-3 days

H0 Telephone Box Swisscom
Brawa 5449 Scale H0
H0 Telephone Box Swisscom

1 x Telephone Box Swisscom Height 33 mm With lighting Spare bulb 3268

Regular price: CHF 18.85

In stock: 1 on the shelf, shipped within 1-3 days

All Brawa items

Filter products
Bulb for Märklin®
Brawa 3340
Bulb for Märklin®

DC Plug-in bulb MS4 Transparent M 60.000 19 V/60 mA

Regular price: CHF 1.70

On order, shipped within 10-15 days

Bulb for Märklin®
Brawa 3341
Bulb for Märklin®

DC Plug-in bulb MS4 Red M 60.001 19 V/60 mA

Regular price: CHF 1.70

On order, lead time to be confirmed

Bulb for Märklin®
Brawa 3342
Bulb for Märklin®

DC Plug-in bulb MS4 Green M 60.002 19 V/60 mA

Regular price: CHF 1.70

On order, shipped within 10-15 days

Bulb (Bayonet Fitting), Vehicle Light
Brawa 3346
Bulb (Bayonet Fitting), Vehicle Light

Vehicle light, 14 V/60 mA DC (for Fleischmann 9530)

Regular price: CHF 2.25

On order, shipped within 10-15 days

Plug-in Bulb
Brawa 3381
Plug-in Bulb

Transparent 16 V/30 mA

Regular price: CHF 3.60

On order, shipped within 10-15 days

Miniature LED Telltale Lights, yellow
Brawa 3481
Miniature LED Telltale Lights, yellow

Panel hole Ø 4.4 mm Installed depth 18 mm With 14-19 V line resistor DC

Regular price: CHF 7.40

On order, shipped within 10-15 days

Miniature LED Telltale Lights, red
Brawa 3482
Miniature LED Telltale Lights, red

Panel hole Ø 4.4 mm Installed depth 18 mm With 14-19 V line resistor DC

Regular price: CHF 7.40

On order, shipped within 10-15 days

Miniature LED Telltale Lights, green
Brawa 3483
Miniature LED Telltale Lights, green

Panel hole Ø 4.4 mm Installed depth 18 mm With 14-19 V line resistor DC

Regular price: CHF 7.40

On order, shipped within 10-15 days

Pushbutton, yellow
Brawa 3511
Pushbutton, yellow

With illuminated pushbutton 6 mm 16 V/30 mA DC Spare bulb, 16 V, Order no. 3293

Regular price: CHF 11.10

On order, shipped within 10-15 days

Pushbutton, red
Brawa 3512
Pushbutton, red

With illuminated pushbutton 6 mm 16 V/30 mA DC Spare bulb, 16 V, Order no. 3293

Regular price: CHF 11.10

On order, shipped within 10-15 days

Pushbutton, green
Brawa 3513
Pushbutton, green

With illuminated pushbutton 6 mm 16 V/30 mA DC Spare bulb, 16 V, Order no. 3293

Regular price: CHF 11.10

On order, shipped within 10-15 days

Pushbutton, white
Brawa 3519
Pushbutton, white

With illuminated pushbutton 6 mm 16 V/30 mA DC Spare bulb, 16 V, Order no. 3293

Regular price: CHF 11.10

On order, shipped within 10-15 days

Built-in pressure Switch
Brawa 3524
Built-in pressure Switch

With retaining nut 2A, 250V (VDE) DC Base dimensions: 22.5 x 15 mm Thread length: 12 mm

Regular price: CHF 3.25

On order, shipped within 10-15 days

Reed Contact Switch TS-560
Brawa 3530
Reed Contact Switch TS-560

0.5 A DC Width 1.9 mm x length 26 mm

Regular price: CHF 4.35

On order, shipped within 10-15 days

Sockets, ∅ 1.6 mm, green
Brawa 3743
Sockets, ∅ 1.6 mm, green

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Sockets, ∅ 1.6 mm, orange
Brawa 3746
Sockets, ∅ 1.6 mm, orange

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Sockets, ∅ 1.6 mm, gray
Brawa 3747
Sockets, ∅ 1.6 mm, gray

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Sockets, ∅ 1.6 mm, white
Brawa 3749
Sockets, ∅ 1.6 mm, white

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Pin Connectors, ∅ 1.6 mm, orange
Brawa 3756
Pin Connectors, ∅ 1.6 mm, orange

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Pin Connectors, ∅ 1.6 mm, white
Brawa 3759
Pin Connectors, ∅ 1.6 mm, white

Suitable for the plug system of Märklin® Pack of 10

Regular price: CHF 3.95

On order, shipped within 10-15 days

Cable Holders
Brawa 3910
Cable Holders

To secure up to 25 wires or cable strands safely Pack of 10

Regular price: CHF 7.40

On order, shipped within 10-15 days

Light-emitting Diode
Brawa 3913
Light-emitting Diode

DC Connect only through 1000 Ohm line resistor Yellow Ø 2 mm

Regular price: CHF 2.70

On order, shipped within 10-15 days

H0 Diesel Locomotive BR 236 DB
Brawa 40674 Scale H0
H0 Diesel Locomotive BR 236 DB

Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.

Regular price: CHF 207.50

On order, shipped within 10-15 days

H0 Diesel Locomotive BR 236 DB
Brawa 40676 Scale H0
H0 Diesel Locomotive BR 236 DB

Prototype One of the primary reasons behind the development of the 360 HP WR 360 C 14 diesel locomotive with fluid transmission was the demand made for the Wehrmacht railway facilities to be “smoke-free”. The reason for this was to eliminate the possibility of locations such as ammunition depots or refineries to be detected from the air as a result of steam plumes generated by a steam locomotive. Thanks to a working partnership that included Berliner Maschinenfabrik AG (previously Louis Schwarzkopf), Orenstein & Koppel as well as Deutz and Voith (only for engine and transmission issues), two prototypes were created within one year which were then comprehensively tested by the German National Railway Locomotive Testing Office during the second half of 1937. The acquired knowledge was then immediately implemented into the further development so that further preliminary locomotives were manufactured as early as 1938. The first of the 245 volume production locomotives entered service at the start of 1939 and were supplied to the army, air force, navy as well as industrial companies. In doing so, the WR 360 C 14 trains were powered by Deutz or MWM engines that were also used in submarines at the time. During the Second World War, the WR 360 C 14 trains made it to many countries throughout Europe and even to North Africa, where some of them also remained. Consequently, several WR 360 C 14 were not only in use on the German Federal and National Railway after 1945; they were also running in countries such as Austria, France and Italy. Now operating under the V36 designation, the locomotives were primarily used in the shunting service and in front of transfer trains in the German Federal Railway. They were also used for suburban passenger transport in the greater Wuppertal, Frankfurt and Nuremberg areas. For this purpose, some locomotives were equipped with a simplified push-pull control or were converted to a one-man control system and equipped with a rooftop cockpit. This ensured that the locomotive staff had an improved view during journeys where the train was pushed. Further noticeable conversions to the Federal Railway locomotives included a larger and more striking cooling water expansion tank on the front end of the engine as well as adjustable radiator shutters. The last of these locomotives, then operating as the 236 range, remained in operation up until 1981. The V36 locomotives operated by the German National Railway were kept in operation for approximately 4 further years. Private railways and industrial companies continued to use some of the locomotives until the end of the 1980s and, even today, it is possible to experience several V36 locomotives in operation on various museum tracks. Model Etched radiator grille (pototypically at models without radiator lamellas) Free standing handles and handrails Clear view through the driver cabin Lights equipped with maintenance-free LEDs Three-point support Finely detailed chassis Fine paintwork and painting Metal frame and wheels, structure made of plastic NEM-standard short-coupling Light change We use digital decoders developed by Brawa in cooperation with Doehler & Haass for models belonging to the BRAWA V36 range. The version Digital EXTRA is equipped with following features: Driver cabin lighting Filigree electronic coupling (interchangeable thanks to NEM-Norm)* Incl. Energy storage (buffers sound, motor and light) Extensive light functions: shunting lights, drivers cabin lighting, tail lights separately switchable Optimized lighting control for drive and shunting mode Flicker-free light, due to stabilized and through a separate capacitor buffered 5 V power supply Original sound Noiseless 16-bit Sound with up to 8 independent channels thanks to newest sound technology and excellent sound characteristics Optimal motor and load control for perfect running characteristics Applicable in all established digital systems (DCC, Motorola, SX1 und SX2) Enclosed Locomotive card in the AC-Version *It is possible to retrospectively convert the Diesel Locomotive V 36 from analogue to digital via a PluX22 interface (only sound functions). Please note that it is not possible to retrospectively convert the digital remote control coupling, the driven fan or the additional light functions.

Regular price: CHF 424.10

On order, shipped within 10-15 days