H0 and N rolling stock, lighting and cable cars
Brawa, model railways made with care
Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.
- 1375items in the shop
- H0 and Nthe scales in the range
- 1948the year of the founding

What makes Brawa
- A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
- Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
- Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
- Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.
The Brawa families
Rolling stock
210 itemsLocomotivesLocomotives in H0 and N, from the DB AG TRAXX BR 147 to the DR BR 132.See the items
56 itemsRailcars and multiple unitsTWINDEXX Vario double-deck trains in N, DRG VT 137 diesel railcar in H0.See the items
360 itemsPassenger coachesDB express coaches, SBB coaches and complete trains in H0 and N.See the items
448 itemsFreight wagonsCovered wagons, container wagons and luggage vans, including the SBB K2 "Ovomaltine".See the itemsScenery and cable cars
117 itemsLighting and scenery accessoriesWooden-mast lights, park lanterns and LED wall lights, clocks and telephone boxes.See the items
12 itemsCable carsNebelhorn, Hahnenkamm, Kanzelwand, Titlis and chairlift, in H0 and N.See the itemsBulbs and wiring
All Brawa items
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA order no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA order no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Length over the buffers: 223.6 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA order no. 2187 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Height 50 mm Spare bulb 3293 Load-carrying parts made from brass Filigree lattice work Intricately handpainted Multi-part lamp housing
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Length over the buffers: 239.8 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 Close coupling mechanism: fitted AC wheelset exchange: possible AC wheelset: BRAWA item no. 2188 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Length over the buffers: 239.8 mm Interior details: fitted Interior lighting: prepared for BRAWA item no. 2212 AC wheelset exchange: possible AC wheelset: BRAWA item no. 2188 AC pickup shoe: BRAWA item no. 2222
On order, lead time to be confirmed
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
With shade Ø 5 x 15 mm Spare bulb 3293 Load-carrying parts made from brass Filigree lattice work Intricately handpainted Multi-part lamp housing
On order, lead time to be confirmed
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days
Prototype In the mid-20s, DRG began significantly upgrading travel comfort in its Order no. express and passenger train networks. Apart from the newly-acquired two-axle models, it started to use above all four-axle compartment waggons on long-distance lines (e.g. Munich – Berlin express trains). From 1928, the company tried out several four-axle corridor carriages with open transitions for future use in this kind of transport. These test waggons proved a success, and from 1930 the company purchased more than 1,000 B, BC and C4i models in riveted design. Characteristic for these waggons was that the B part always had single-wing doors, while the C part featured double doors. Then, when advances in welding technology could also be applied in wagon building, it was time to upgrade the old construction type. Therefore, in 1935 three BC and three C test waggons were bought, which led to mass production of these types in almost unchanged design. Despite the weight savings, the welded waggons offered fewer seats than their riveted predecessors because DRG designed the passenger compartments more spaciously. Included here were for instance larger windows with 150-mm lower sills, which offered above all the youngest travellers a better view of railway operations not yet dominated by sound protection walls. In six years, more than 1,000 welded C and 145 BC waggons were built before further advances in the form of skirted passenger waggons made more improvements possible. The war scattered express train waggons across half of Europe, with larger stocks outside German railway operators, for instance at ÖBB, SNCF and PKP. These waggons remained invaluable in regional transport for DB and DR up to the late seventies, reaching an age of over forty years. They were also used internationally into the sixties, travelling as far as Scandinavia and the Balkans. There were many conversions, for instance into sleeping, buffet and semi-luggage carriages. On the occasion of the anniversary in 1985, DB put together an entire train from several different types of express wagon. Unfortunately, these waggons are today spread over several locations and hardly any are operable. Model True-to-epoch construction types Precise replica of the Görlitz III bogies with quadruple spring system Precise replica of the frame with many extra mounted parts Prepared for interior lighting Multipart interior fittings in multicolour painting Individual seats Short coupling kinematics Three-point support Wheetsets in toe bearing Replica of the rivets on the roof In-plane assembled windows Metal wheels Precise replica of the brake unit True-to-scale windows
On order, shipped within 10-15 days

