H0 and N rolling stock, lighting and cable cars
Brawa, model railways made with care
Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.
- 1375items in the shop
- H0 and Nthe scales in the range
- 1948the year of the founding

What makes Brawa
- A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
- Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
- Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
- Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.
The Brawa families
Rolling stock
210 itemsLocomotivesLocomotives in H0 and N, from the DB AG TRAXX BR 147 to the DR BR 132.See the items
56 itemsRailcars and multiple unitsTWINDEXX Vario double-deck trains in N, DRG VT 137 diesel railcar in H0.See the items
360 itemsPassenger coachesDB express coaches, SBB coaches and complete trains in H0 and N.See the items
448 itemsFreight wagonsCovered wagons, container wagons and luggage vans, including the SBB K2 "Ovomaltine".See the itemsScenery and cable cars
117 itemsLighting and scenery accessoriesWooden-mast lights, park lanterns and LED wall lights, clocks and telephone boxes.See the items
12 itemsCable carsNebelhorn, Hahnenkamm, Kanzelwand, Titlis and chairlift, in H0 and N.See the itemsBulbs and wiring
All Brawa items
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing
On order, shipped within 10-15 days
Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps
On order, shipped within 10-15 days
Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps
On order, shipped within 10-15 days
Prototype In order to make daily journeys from the larger urban centres to the capital easier, the East German Deutsche Reichsbahn (DR) introduced a city express service to Berlin at the end of 1960. These connections, designed as through trains, had fewer stops compared to normal D trains, which resulted in shorter journey times. Each morning, the city express train – originally designated as the D 150, and from 1975 onwards as the D 1050 – travelled conveniently from Meiningen to Berlin-Schöneweide via Suhl, Erfurt, Weimar, Halle and Berlin-Schönefeld Airport. In the evening, passengers could complete the return journey to Meiningen aboard the D 1057. In both directions, the locomotives were switched from combustion traction (“V traction") to electric traction (“E traction") in Erfurt. Following the timetable change in May 1989, the designation for the city express service was dropped and the last remaining connections were absorbed into the DR’s normal service. Model Electric Locomotive BR 211 (Road no. 211 080-7) Luggage Car (Road no. 57 50 82-15 025-2) Dining Car WRg (Road no. 51 50 88-15 041-9) 2 x Passenger Coach Bmh (Road no. 50 50 21-12 062-9 / 50 50 21-12 063-7) Mail Car (Road no. 50 50 00-10 456-0) Passenger Coach (Order no. 50797) is a suitable add-on car for the BRAWA D 1050 train set.
On order, shipped within 10-15 days
Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)
On order, shipped within 10-15 days
Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)
On order, shipped within 10-15 days
Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)
On order, shipped within 10-15 days
Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)
On order, shipped within 10-15 days
Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)
On order, shipped within 10-15 days
Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days

