Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

H0 and N rolling stock, lighting and cable cars

Brawa, model railways made with care

Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.

Choose a family See all items

  • 1375items in the shop
  • H0 and Nthe scales in the range
  • 1948the year of the founding
SBB K2 covered goods wagon

What makes Brawa

  • A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
  • Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
  • Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
  • Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.

Our favourites

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Wooden-mast Light, Pin-Socket, LED
Brawa 84124 Scale H0
H0 Wooden-mast Light, Pin-Socket, LED

1 x Wooden-mast Light, Pin-Socket (LED) Height 88 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 17.05

In stock, shipped within 1-3 days

H0 Platform Light, Pin-Socket, LED
Brawa 84049 Scale H0
H0 Platform Light, Pin-Socket, LED

1 x Platform Light, Pin-Socket (LED) Height 70 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.15

In stock: 5 on the shelf, shipped within 1-3 days

H0 Street Light, Pin-Socket, LED
Brawa 84013 Scale H0
H0 Street Light, Pin-Socket, LED

1 x Street Light, Pin-Socket (LED) Height 58 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 15.95

In stock: 5 on the shelf, shipped within 1-3 days

H0 Telephone Box Swisscom
Brawa 5449 Scale H0
H0 Telephone Box Swisscom

1 x Telephone Box Swisscom Height 33 mm With lighting Spare bulb 3268

Regular price: CHF 18.85

In stock: 1 on the shelf, shipped within 1-3 days

All Brawa items

Filter products
H0 Low-loader Freight Car Uikk631 DB
Brawa 50801 Scale H0
H0 Low-loader Freight Car Uikk631 DB

Friedrich Krupp Maschinenfabriken AG built a total of 15 type St 309a low-loader wagons for Deutsche Bundesbahn (DB) between 1957 and 1966. These wagons were specially designed for transporting small but heavy goods. With a dead weight of approximately 15 tonnes, a maximum payload of 21 tonnes was possible. Due to the compact design, which was dominated exclusively by the curved solebar, it was not possible to equip the vehicles with a compressed air brake. To secure the wagons when they were parked, it was only possible to lock one wheel set via a handbrake. In addition to DB, the Dutch State Railway also purchased five of these vehicles from Krupp for the same purposes from 1962 onwards. In Germany, the last six wagons were retired from the DB AG inventory in 2004.

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Low-loader Freight Car Uikk631 DB AG
Brawa 50802 Scale H0
H0 Low-loader Freight Car Uikk631 DB AG

Friedrich Krupp Maschinenfabriken AG built a total of 15 type St 309a low-loader wagons for Deutsche Bundesbahn (DB) between 1957 and 1966. These wagons were specially designed for transporting small but heavy goods. With a dead weight of approximately 15 tonnes, a maximum payload of 21 tonnes was possible. Due to the compact design, which was dominated exclusively by the curved solebar, it was not possible to equip the vehicles with a compressed air brake. To secure the wagons when they were parked, it was only possible to lock one wheel set via a handbrake. In addition to DB, the Dutch State Railway also purchased five of these vehicles from Krupp for the same purposes from 1962 onwards. In Germany, the last six wagons were retired from the DB AG inventory in 2004.

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Flat Car Sggmrrs InnoFreight
Brawa 50803 Scale H0
H0 Flat Car Sggmrrs InnoFreight

Prototype Innofreight, as the name suggests, is fully committed to innovation in rail freight transport. The company claims that its self-developed InnoWaggons allow freight transport on the railways to be organised more efficiently than ever before. Innofreight achieves this efficiency by offering its InnoWaggons in three different lengths: 2x30 ft, 2x40 ft and 2x45 ft. Each vehicle consists of two short-coupled carrying wagons. The InnoWaggons can be fitted with a variety of different superstructures and transport racks by means of standardised folding container spigots. The wagons can thus be individually equipped and loaded for each customer and, if required, even for each transport assignment. This is certainly a very far-sighted innovation, especially given the increasingly complex approval procedures for rail vehicles. Model Replica of all three InnoWaggons double carriages Replica of the latest generation Y25 bogie Extra mounted brake-switch Fine engravings NEM-standard short-coupling True-to-original replica of the car bottom Wheelsets with inside contours Bogie with three-point support Without loading, for free arrangement

Regular price: CHF 112.70

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs 35 "Westfalia" DB
Brawa 50804 Scale H0
H0 Covered Freight Car Gmhs 35 "Westfalia" DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Tank Car 4-axle Zas "Wasserwagen" H.F. Wiebe
Brawa 50807 Scale H0
H0 Tank Car 4-axle Zas "Wasserwagen" H.F. Wiebe

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry of the GDR succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. As the GDR also exported these to obtain foreign currency, the cars also came to the NSW or non-socialist economic area with such transports. Model Precise paintwork and painting Individually mounted brake systems Etched walkway Individually mounted railing Finely detailes Y-25 bogie Brake blocks in wheel plane

Regular price: CHF 56.75

On order, shipped within 10-15 days

H0 Tank Car 4-axle Uia "DHL" GATX
Brawa 50808 Scale H0
H0 Tank Car 4-axle Uia "DHL" GATX

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry of the GDR succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. As the GDR also exported these to obtain foreign currency, the cars also came to the NSW or non-socialist economic area with such transports. Model Precise paintwork and painting Individually mounted brake systems Etched walkway Individually mounted railing Finely detailes Y-25 bogie Brake blocks in wheel plane

Regular price: CHF 56.75

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50809 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50810 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50811 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50812 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50828 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 569.05

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50829 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 822.65

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50830 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 827.15

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50843 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 762.15

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50844 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 1,037.40

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50845 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 1,050.95

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Ölverein" DRG
Brawa 50846 Scale H0
H0 Tank Car 2-axle Z[P] "Ölverein" DRG

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "B.V.-Aral" DRG
Brawa 50847 Scale H0
H0 Tank Car 2-axle Z [P] "B.V.-Aral" DRG

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "VTG" DB
Brawa 50848 Scale H0
H0 Tank Car 2-axle Z[P] "VTG" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "HOBUM" DB
Brawa 50849 Scale H0
H0 Tank Car 2-axle Z [P] "HOBUM" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Esso" DB
Brawa 50850 Scale H0
H0 Tank Car 2-axle Z[P] "Esso" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "BP" DB
Brawa 50851 Scale H0
H0 Tank Car 2-axle Z [P] "BP" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z DR
Brawa 50852 Scale H0
H0 Tank Car 2-axle Z DR

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Zw DR
Brawa 50853 Scale H0
H0 Tank Car 2-axle Zw DR

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days