Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

H0 and N rolling stock, lighting and cable cars

Brawa, model railways made with care

Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.

Choose a family See all items

  • 1375items in the shop
  • H0 and Nthe scales in the range
  • 1948the year of the founding
SBB K2 covered goods wagon

What makes Brawa

  • A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
  • Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
  • Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
  • Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.

Our favourites

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Wooden-mast Light, Pin-Socket, LED
Brawa 84124 Scale H0
H0 Wooden-mast Light, Pin-Socket, LED

1 x Wooden-mast Light, Pin-Socket (LED) Height 88 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 17.05

In stock, shipped within 1-3 days

H0 Platform Light, Pin-Socket, LED
Brawa 84049 Scale H0
H0 Platform Light, Pin-Socket, LED

1 x Platform Light, Pin-Socket (LED) Height 70 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.15

In stock: 5 on the shelf, shipped within 1-3 days

H0 Street Light, Pin-Socket, LED
Brawa 84013 Scale H0
H0 Street Light, Pin-Socket, LED

1 x Street Light, Pin-Socket (LED) Height 58 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 15.95

In stock: 5 on the shelf, shipped within 1-3 days

H0 Telephone Box Swisscom
Brawa 5449 Scale H0
H0 Telephone Box Swisscom

1 x Telephone Box Swisscom Height 33 mm With lighting Spare bulb 3268

Regular price: CHF 18.85

In stock: 1 on the shelf, shipped within 1-3 days

All Brawa items

Filter products
H0 Covered Freight Car Gms "Rotkäppchen" DR
Brawa 51189 Scale H0
H0 Covered Freight Car Gms "Rotkäppchen" DR

Prototype Rotkäppchen Sektkellerei has its origins in Freyburg an der Unstrut in 1856. Founded by brothers Moritz and Julius Kloss together with their friend Carl Foerster, Sektkellerei Kloss und Foerster specialized in the production of sparkling wines. Due to a new law in 1894, the iconic red capsule became the new brand name. “Rotkäppchen Sekt” became one of the first German brands to be registered and still exists today. The company is now part of the Rotkäppchen-Mumm Group and stands for tradition, quality, and enjoyment. The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs35 "Bosch" DB
Brawa 51191 Scale H0
H0 Covered Freight Car Gmhs35 "Bosch" DB

Prototype Bosch was founded in Stuttgart in 1886 by Robert Bosch. Initially, the company focused on the manufacture of electrical engineering and automotive parts. Even in its early years, Bosch developed innovative products, including spark plugs for cars. Over time, the company expanded worldwide and became one of the leading suppliers of automotive technology, industrial electronics, and household appliances. Today, Bosch is known for its quality, innovations, and its role as a major global technology group. The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Glms201 DB
Brawa 51193 Scale H0
H0 Covered Freight Car Glms201 DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Covered Freight Car Nm K.P.E.V.
Brawa 51242 Scale H0
H0 Covered Freight Car Nm K.P.E.V.

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gm K.Sächs.Sts.E.B.
Brawa 51243 Scale H0
H0 Covered Freight Car Gm K.Sächs.Sts.E.B.

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gm GOS
Brawa 51244 Scale H0
H0 Covered Freight Car Gm GOS

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DRG
Brawa 51245 Scale H0
H0 Covered Freight Car G DRG

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DRG
Brawa 51246 Scale H0
H0 Covered Freight Car G DRG

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G 02 "Brake Carriage" DB
Brawa 51247 Scale H0
H0 Covered Freight Car G 02 "Brake Carriage" DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G10 DB
Brawa 51248 Scale H0
H0 Covered Freight Car G10 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G10 DB
Brawa 51249 Scale H0
H0 Covered Freight Car G10 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G DR
Brawa 51250 Scale H0
H0 Covered Freight Car G DR

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car G ÖBB
Brawa 51251 Scale H0
H0 Covered Freight Car G ÖBB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Z CSD
Brawa 51252 Scale H0
H0 Covered Freight Car Z CSD

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car Gklm191 DB
Brawa 51253 Scale H0
H0 Covered Freight Car Gklm191 DB

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Covered Freight Car (Gw) G DR
Brawa 51254 Scale H0
H0 Covered Freight Car (Gw) G DR

Prototype The Deutsche Staatsbahnwagenverband (DWV), founded in 1909, developed the A2 standard wagon based on the existing state-railway covered goods wagons, featuring a 4.5 m wheelbase and a 15-tonne load capacity. From 1911 onwards, this design was produced as numerous series for the Länderbahnen (state railways), private railways and later the Reichsbahn (National Railway). By 1934, an astonishing total of 121,770 wagons of this type, designated G Kassel/Munich, had been delivered to the Deutsche Reichsbahn Gesellschaft alone. Including wagons built for private and foreign railways, it is estimated that more than 160,000 wagons were manufactured based on the A2 master drawing. From 1938 onwards, these wagons were reinforced to withstand the additional stresses caused by the installation of air brakes as well as increased speeds. Diagonal struts were welded into the end sections, and in some cases, the end stanchions were rotated by 90 degrees. By the end of 1952, 35,600 wagons of this type, now designated as G10, were still in service with Deutsche Bundesbahn. Over time, the inventory steadily diminished due to conversions to Gms54 wagons, general fleet modernisation and the resulting decommissioning. In 1976, the last wagon of this type, now designated as Gklm191, was withdrawn from the maintenance fleet. However, many of these wagons remained in use as station or workshop vehicles. Model Finer board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Dortmunder Union" DB
Brawa 51255 Scale H0
H0 Beer Car "Dortmunder Union" DB

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Adler-Brauerei Bielstein" DRG
Brawa 51256 Scale H0
H0 Beer Car "Adler-Brauerei Bielstein" DRG

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Bières de Colmar" A.L.
Brawa 51257 Scale H0
H0 Beer Car "Bières de Colmar" A.L.

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Brasserie Meteor" SNCF
Brawa 51258 Scale H0
H0 Beer Car "Brasserie Meteor" SNCF

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Paderborner Bier" DR, Brit-US-Zone
Brawa 51259 Scale H0
H0 Beer Car "Paderborner Bier" DR, Brit-US-Zone

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "De Gekroonde Valk" NS
Brawa 51262 Scale H0
H0 Beer Car "De Gekroonde Valk" NS

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Königl. Mineralbrunnen Fachingen" K.P.E.V.
Brawa 51263 Scale H0
H0 Beer Car "Königl. Mineralbrunnen Fachingen" K.P.E.V.

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days

H0 Beer Car "Palmin" DRG
Brawa 51264 Scale H0
H0 Beer Car "Palmin" DRG

Prototype Beer was one of the first goods to be transported on our railways. Breweries commissioned their own insulated wagons, which were incorporated into the railway companies’ fleets for operational purposes. Due to the small production batches, these wagons were rarely identical but generally conformed to the dimensions of standard goods wagons built by the various state and national railways. It is hardly surprising, then, that the beer transport wagons were yet another iteration of the A2 wagon type master drawing. The original wagon that served as the inspiration for BRAWA’s new model features vertically mounted wooden cladding that conceals the body frame, increasing the width of the wagon body. In this design, as well as slightly modified variants, these beer wagons were used by many breweries between 1910 and 1970. Model Vertical board joints Three-point support Multi-part Kkg brake system True to original frame construction Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover

Regular price: CHF 42.35

On order, shipped within 10-15 days