Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

H0 and N rolling stock, lighting and cable cars

Brawa, model railways made with care

Locomotives, coaches and wagons in H0 and N, plus street lights, cable cars, bulbs and wiring: the world of a family firm from Waiblingen.

Choose a family See all items

  • 1375items in the shop
  • H0 and Nthe scales in the range
  • 1948the year of the founding
SBB K2 covered goods wagon

What makes Brawa

  • A family firm since 1948: founded by Artur Braun in Waiblingen, in southern Germany, Brawa is run today by the third generation of the family.
  • Love of detail: individually fitted handrails, sprung buffers, crisp printing: every model starts from measurements and photographs of the original and a study of the construction drawings.
  • Sturdy locomotives: most are largely die-cast zinc, for weight and robustness, for DC or AC, with sound and, on steam locomotives, smoke.
  • Cable cars and lighting: H0 cable cars are a house speciality, starting with the Nebelhorn cableway in Oberstdorf; lamps and signals follow, with load-bearing parts made of brass or etched sheet.

Our favourites

New
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound
Brawa 44165 Scale H0
H0 Electric Railcar elT 1011-1021 DRG ("Rübezahl") AC Digital EXTRA Sound

Prototype Even before World War I, plans were being made in Prussia to electrify several mountain railways in Silesia, including the so-called “Zackenbahn” (named after the Zacken River) between Hirschberg and Polaun. Given the difficult topographical conditions, this new form of traction promised considerable savings and more cost-effective operation. However, the outbreak of World War I prevented the work from being completed quickly, and it was not until 1923 that continuous operation began. Since operating trains pulled by locomotives was very cumbersome due to fluctuating traffic volumes, considerations were made early on to switch to railcars. The suitability of the ET 88, originally procured for suburban transport in Berlin, prompted the DRG to procure additional four-axle electric railcars. In 1926-1927, LHW Breslau and WUMAG in Görlitz, in collaboration with SSW-Werke, delivered a total of 11 railcars that were to become the symbol of electric train transport in Silesia. The distinctive vehicles with their open entrance platforms were christened “Rübezahl” by the local population, a name that actually refers to a moody mountain spirit from the Giant Mountains. The railcars, which were initially painted green and designated “Breslau 511-521,” were always used in pairs with up to eight light standard branch line cars as trailers. Due to low demand, a single railcar operated between Josephinenhütte and Grünthal. The greatest rush of passengers was on weekends when the weather was nice and during the winter sports season. Up to three railcars with twelve trailers then operated as a train. At the beginning of the 1930s, the railcars were given the new designation elt 1011-1019 and a two-tone paint scheme. In 1941, the four-axle railcars were given their final numbers and became ET 89 01-11. With the exception of ET 89 11, which had to be taken out of service in 1943 due to an accident, all of them survived the war and the end of electric train transport in Silesia. Four railcars were transferred to PKP, but were not used there. The exact whereabouts of three others are unknown. ET 89 01, 04, and 07 ended up in the western occupation zones and thus became part of the DB fleet, which was founded in 1949. Only ET 89 04 was refurbished and served at the Munich Central Station depot. Initially still listed as 2nd and 3rd class cars, later photos show it as a pure 3rd class vehicle, which then exclusively carried 2nd class passengers after the class reform in 1956. On September 2, 1959, its final hour arrived – ET 89 04 was the last of its kind to be taken out of service and dismantled shortly thereafter, leaving only a few photos to remind us of these unique railcars. Model Illuminated upper carriage lanterns and tail lights Separately switchable interior lighting Separately switchable third headlight New motor New sound

Regular price: CHF 351.90

In stock: 1 on the shelf, shipped within 1-3 days

N Covered Freight Car K2 SBB
Brawa 67871 Scale N
N Covered Freight Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Precise replica of board joints Finely engraved fan grill Precise paintwork and painting NEM-standard short-coupling Metal wheels True to original frame construction

Regular price: CHF 38.35

In stock: 1 on the shelf, shipped within 1-3 days

H0 Wooden-mast Light, Pin-Socket, LED
Brawa 84124 Scale H0
H0 Wooden-mast Light, Pin-Socket, LED

1 x Wooden-mast Light, Pin-Socket (LED) Height 88 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 17.05

In stock, shipped within 1-3 days

H0 Platform Light, Pin-Socket, LED
Brawa 84049 Scale H0
H0 Platform Light, Pin-Socket, LED

1 x Platform Light, Pin-Socket (LED) Height 70 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 16.15

In stock: 5 on the shelf, shipped within 1-3 days

H0 Street Light, Pin-Socket, LED
Brawa 84013 Scale H0
H0 Street Light, Pin-Socket, LED

1 x Street Light, Pin-Socket (LED) Height 58 mm Simple handling Time-consuming cable connections between the lamp and the socket are not necessary The lamp can be tilted in the socket up to 10° to compensate for uneven terrain Can be separated electrically Compatible to each other Load-carrying parts made from brass Filigree lattice work Multi-part lampheads Intricately handpainted

Regular price: CHF 15.95

In stock: 5 on the shelf, shipped within 1-3 days

H0 Telephone Box Swisscom
Brawa 5449 Scale H0
H0 Telephone Box Swisscom

1 x Telephone Box Swisscom Height 33 mm With lighting Spare bulb 3268

Regular price: CHF 18.85

In stock: 1 on the shelf, shipped within 1-3 days

All Brawa items

Filter products
H0 Express Train Coach B4ümg-54 DB
Brawa 58079 Scale H0
H0 Express Train Coach B4ümg-54 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Express Train Coach B4ümg-54 DB
Brawa 58080 Scale H0
H0 Express Train Coach B4ümg-54 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Express Train Coach B4ümg-54 DB
Brawa 58081 Scale H0
H0 Express Train Coach B4ümg-54 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Half Luggage Car BPw4ümg-59 DB
Brawa 58082 Scale H0
H0 Half Luggage Car BPw4ümg-59 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Luggage Car D4üms DB
Brawa 58083 Scale H0
H0 Luggage Car D4üms DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Luggage Car Düms902 DB
Brawa 58090 Scale H0
H0 Luggage Car Düms902 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 81.15

On order, shipped within 10-15 days

H0 Passenger Coach AB4ymg DB
Brawa 58098 Scale H0
H0 Passenger Coach AB4ymg DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 Passenger Coach B4ymg DB
Brawa 58100 Scale H0
H0 Passenger Coach B4ymg DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 Control Car BPw4ymgf DB
Brawa 58101 Scale H0
H0 Control Car BPw4ymgf DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 130.75

On order, lead time to be confirmed

H0 Passenger Coach AB4ymg DB
Brawa 58102 Scale H0
H0 Passenger Coach AB4ymg DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Passenger Coach B4ymg DB
Brawa 58103 Scale H0
H0 Passenger Coach B4ymg DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Passenger Coach B4ymg DB
Brawa 58104 Scale H0
H0 Passenger Coach B4ymg DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Control Car BPw4ymgf DB
Brawa 58105 Scale H0
H0 Control Car BPw4ymgf DB

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 175.90

On order, lead time to be confirmed

H0 Passenger Coach BCymgb-51 Deutsche Bundesbahn
Brawa 58106 Scale H0
H0 Passenger Coach BCymgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 Passenger Coach C4mgb-51 Deutsche Bundesbahn
Brawa 58107 Scale H0
H0 Passenger Coach C4mgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 Passenger Coach C4ymgb-51 Deutsche Bundesbahn
Brawa 58108 Scale H0
H0 Passenger Coach C4ymgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 99.20

On order, shipped within 10-15 days

H0 Control Car CPw4ymgf-51 Deutsche Bundesbahn
Brawa 58109 Scale H0
H0 Control Car CPw4ymgf-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 130.75

On order, lead time to be confirmed

H0 Passenger Coach BCymgb-51 Deutsche Bundesbahn
Brawa 58110 Scale H0
H0 Passenger Coach BCymgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Passenger Coach C4mgb-51 Deutsche Bundesbahn
Brawa 58111 Scale H0
H0 Passenger Coach C4mgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Passenger Coach C4ymgb-51 Deutsche Bundesbahn
Brawa 58112 Scale H0
H0 Passenger Coach C4ymgb-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Control Car CPw4ymgf-51 Deutsche Bundesbahn
Brawa 58113 Scale H0
H0 Control Car CPw4ymgf-51 Deutsche Bundesbahn

Prototype The 26.4 m express train wagons were introduced before the express coaches of the same length. Around 1950, DB, together with a number of wagon factories under the management of the Wegmann company, began development of new four-axle passenger carriages for district and long-haul transport at medium distances. After building three test coaches with a length of 26.4 m with central and end doors, the company finally decided on this type of construction. In late 1951 the first order for 500 of these carriages was placed with 15 coachbuilders. In the following years additional orders were placed for 245 units, the delivery of which would drag on until early 1955. The two basic types were the mixed-class AB carriage and the single-class B carriage. On the basis of the latter type, various push-pull train control cars were developed to meet traction requirements for push-pull operations and, for traffic reasons, carriages with luggage compartments or dining areas were also designed. The running gear (Minden/Deutz-type bogie) and the structural design were basically the same for all types. The undercarriage and body frame were a welded sectional steel construction. Special attention was paid to sound and heat insulation, the cost of which had to be kept within reasonable limits, in keeping with the planned use of the carriages in district traffic. The walls and undercarriage were lined with rock wool, the roof with a sprayed insulation consisting of asbestos flakes. Apart from two designs, the carriages were divided into two passenger compartments of different lengths by the central doors, which were actually located slightly off-centre. The central doors featured two relatively narrow revolving doors and a central pillar, while the end doors with their wide revolving doors, whose centre of rotation was moved inwards, and the somewhat more favourable arrangement of the steps allowed convenient entry and exit. Multi-part folding doors formed the end of the front wall, which, when closed, protruded into the vestibule like a box to keep the “Bern rectangle” free. The seating arrangement in the passenger compartments was 1 + 2 in the upper and 2 + 2 in the lower-class carriage. The toilets were located at the ends of the carriages and protruded into the large vestibules. The interior design of the carriages was relatively simple, but nevertheless dignified. In the first-class areas, the walls and the frames of the upholstered seats were covered with fine wood veneer; in second class, the wall surfaces were coated with plastic wallpaper. The upholstery in the first-class carriage corresponded to the standard design in use by Deutsche Bahn at the time. The second-class carriage was equipped with upholstered double seats covered with imitation leather. The luggage racks in both classes consisted of thin-walled, high-strength tubular steel and were coated with stove enamel in a nickel silver colour. A high-pressure heating system was installed, which could be regulated in fine degrees by opening and closing heat-insulating flaps. The main steam pipe under the carriage, a common feature in other models, was removed. In addition to the steam heating, a normal electric heater rated for 1,000 volts was installed, whose resistance heating elements were arranged under the seats so that the floor remained unobstructed. Given the importance of push-pull operations within the framework of the structural transformation of the traction haulage service, as well as the need to unburden the over-utilised (terminus) railway stations, all express train wagons were designed for this purpose and prepared for subsequent installation of the necessary equipment, such as control lines and the main tank air line (8 atmospheres). 118 carriages received driver’s cabs. Initially, however, only some of these carriages and the associated piped wagons were fitted with all equipment necessary for operation by remote control. Located at one end of the carriage, the driver’s cabs were completely identical in all three push-pull control car types; the operational requirement to be able to use these carriages freely like normal carriages resulted in a head section with foot bridge. The floor plans show the arrangement of the driver’s cab and the conductor’s compartment on both sides of the central passageway in the carriage’s head section. Two hinged doors with window panes were arranged so that one of them formed the end exterior wall when used as a control car. When used in normal trains it served as the end of the driver’s compartment. Analogously, the other door either connected the head section to the interior or served as the end of the driver’s cab. This sensible arrangement of the doors allowed free movement from carriage to carriage if necessary. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Version with riveted roofs and overlapping roof plates Alternator on bogie separately mounted Fine paintwork and painting Extra mounted steps Extra mounted handrails

Regular price: CHF 175.90

On order, lead time to be confirmed

H0 Express Train Coach AB4ümg-55 DB
Brawa 58117 Scale H0
H0 Express Train Coach AB4ümg-55 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Express Train Coach B4ümg-54 DB
Brawa 58119 Scale H0
H0 Express Train Coach B4ümg-54 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 103.70

On order, shipped within 10-15 days

H0 Express Train Coach B4ümg-54 DB
Brawa 58121 Scale H0
H0 Express Train Coach B4ümg-54 DB

Prototype Around 1952, the DB central office in Minden developed a type programme for long-distance coaches with a length of 26.4 m (Group 53). A range of coaches was developed on the basis of a modular system under the direction of Dr Adolf Mielich, who repurposed his designs from the Reichsbahn era and added many modern elements, including closed rubber-bead transitions and 1,000 or 1,200 mm-wide sliding windows. The new coaches differed from the pre-war types in their even number of compartments and symmetrical coach halves, which made it possible to combine identical or different coach classes as well as dining and luggage compartments. Following the construction of nine test coaches in 1952, mass production began in 1955. With only three seats per bench instead of the usual four, the B4ümg-54 passenger carriages (1,225 units) offered second-class passengers a new level of comfort. As a result, this “passenger carriage for the people” was very well received by the general public. The first-class A4ümg-54 wagon type (199 units) exemplified the increased focus on comfort during this period. These wagons left the works painted in an elegant dark blue livery and were primarily incorporated into the DB’s F trains. The last types to be developed for Wagon Group 53 were the mixed-class AB4ümg-55 (357 units) and, from the end of the 1950s, the semi-luggage carriages of the type BPw4üm-58/59 (138 units). Thanks to numerous groundbreaking innovations, these wagons – and the later conversions derived from them – would remain an integral part of DB’s passenger train fleet for decades to come. It is therefore hardly surprising that the last of these wagons were only retired in the early 1990s, with some examples then commencing a “second life” in museum traffic. Model True-to-scale reproduction of the windows Wheel sets of type 094/096 with corrugated wheeldiscs on both sides True-to epoch interior fittings Interior lighting prepared or built-in Elastic rubber bulge NEM-standard short coupling Alternator on bogie separately mounted Extra mounted steps and handrails Version with welded roofs Compatible with the electrical coupling from BRAWA

Regular price: CHF 103.70

On order, shipped within 10-15 days