Three-rail H0, Mini-Club and gauge 1
Märklin, Swiss trains in H0, Z and 1
Re 4/4 II and Swiss Express coaches, Re 460, Giruno, BLS Ae 6/8: Märklin models Swiss trains in H0 (1:87) for its three-rail system, and also at 1:220 with Mini-Club and at 1:32 in gauge 1.
- 1420items in the shop
- H0, Z and 1three scales
- Since 1859a Göppingen company

What Märklin brings to your layout
- Swiss trains: Re 4/4 II and EW III Swiss Express coaches, Re 460, Giruno, Ce 6/8 I, BLS Ae 6/8, SBB and BLS wagons. The Re 4/4 II, Re 460, Ce 6/8 I and Ae 6/8 carry Swiss lighting: three white lights at the front, one white at the rear.
- The three-rail system: a centre conductor of stud contacts between the rails, both rails for the return: reversing loops and wyes without complicated wiring, on C track as on K track.
- Three scales: H0 at 1:87 since 1935, Mini-Club at 1:220, unveiled in 1972 at the Nuremberg Toy Fair, and gauge 1 at 1:32.
- Märklin digital: mfx+ decoders with sound in the locomotives, Central Station 3 plus, Mobile Station WLAN, decoders for locomotives and accessories.
The Märklin families
For your H0 layout (1:87)
34 itemsSwiss trains H0Locomotives, multiple units, coaches and wagons of the SBB and BLS.See the items
174 itemsLocomotives H0Electric, diesel and steam locomotives, railcars.See the items
112 itemsCoaches H0Coaches and coach sets, including the Swiss Express and Giruno add-on sets.See the items
200 itemsFreight wagons H0Single wagons and sets, from the SBB, the BLS and all over Europe.See the items
219 itemsTrack, catenary and signals H0C track and K track, points, catenary, signals and ramps.See the items
60 itemsDigital and electronicsCommand stations, Mobile Station, decoders, cables and power supplies.See the itemsMini-Club (1:220) and gauge 1 (1:32)
All Märklin items
Model Feedback module for contact devices on digitally controlled layouts. Can be plugged into the L88 (60883) with the connecting cable included. Connection socket for another s 88 decoder (60881). 16 inputs for contact devices. The L88 (60883) is required for connection to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock, shipped within 1-3 days
Model For switching 4 different track or lighting circuits on or off. For example, 4 sidings in different track power circuits can be switched. With 8 connection sockets on the back. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7273 unit
In stock, shipped within 1-3 days
Red and brown connecting cable with flat plugs for C tracks at both ends. Length 2 m.
In stock, shipped within 1-3 days
Model Lattice mast and bracket arm made of metal. Base with a click connection. Additional mast holder to match the Märklin bridge system. Height 100 mm. Pack of 5 pieces. Note The masts of the H0 catenary are made of metal with an integrated plastic foot. The metal bracket arms are interchangeable and can be used long or short. The mast foot is fitted into the matching base for C track or K track by means of a click connection.
Content: 5 pc. (CHF 8.58 / 1 pc.)
In stock, shipped within 1-3 days
Model For retrofitting 2 C track points. Suitable for right-hand and left-hand points or a three-way point. Can be used with a manual switch lever and/or with the 74491 electric point motor. Lighting with maintenance-free LEDs. Note Point lanterns with LED lighting. All C track points, with a manual switch lever or an electric point motor, controlled conventionally or digitally, can be fitted with illuminated point lanterns. The installation is simple, and the lighting insert also fits the fixed lantern of the double slip point. Maintenance-free miniature LEDs make the true-to-scale size of the lanterns possible. Note: A fixed lantern with prototypical lighting is already installed in the 24624 double slip point.
In stock, shipped within 1-3 days
1 right-hand and 1 left-hand point lantern each, for mounting on points with a plug-in point motor. Can be used with a manual lever, the 75491 point motor or the 7548 below-baseboard motor. Lighting with maintenance-free LEDs.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable manual control lever. Fixed common crossing and check rails. Length of the straight track 225 mm. Point curve 14° 26'. Radius of the curve 902.4 mm. The 75491 electromagnetic point motor can be plugged in. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock, shipped within 1-3 days
Prototype The Märklin three-way point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin three-way point with a length of 188.3 mm. 2 x 24.3°. Connection dimensions on both ends the same as for the 24611/24612 points. Asymmetrical common crossing area with offset pairs of point blades. Two manual control levers. Two 74491 electric point motors and the 74470/74471 point lanterns can be retrofitted. Digital operation is possible with the 60831 or 74465 decoder. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock, shipped within 1-3 days
Prototype Four type EWIII standard passenger coaches of the Swiss Federal Railways (SBB/CFF/FFS). One combine, type AD, 1st class, one restaurant car, type WR, and two high-capacity coaches, type B, 2nd class. Pebble grey/blood orange basic paint scheme of the Swiss Express. Route: Genève–Lausanne–Bern–Zürich HB. Car numbers 1, 13 and 14. Restaurant car without a car number. The coaches look as they did starting in 1975. Model Complete new tooling for the EWIII family of coaches. Multi-coloured interior details. All of the coaches have LED interior lighting built in as standard. A buffer capacitor is built into each coach to bridge brief stretches without power. Restaurant car with lighted table lamps. One high-capacity coach has tail lighting built in as standard. Equipped with separable, current-conducting close couplers. The interior lighting works in conjunction with the restaurant car; the prescribed order of the vehicles must be maintained for this. There is a digital interface in the restaurant car for fitting a function decoder to control various lighting functions. Type-specific bogies, roof shapes, side walls and underbodies with many applied details. Buffer height per NEM. Separately applied vents, grab rails, control lines and steps on the bogies. Printed destination boards and car numbers. Two plug-in transfer end doors, which were fitted on the prototype for transfer runs, are included with each coach. The coach with car number 14 also comes with an imitation of an automatic coupler. All of the coaches are packaged individually in additional outer packaging. The minimum radius for operation is 360 mm. Length over the buffers approximately 113.2 cm. Highlights Complete new tooling for the EWIII family of coaches For the "50 Years of the Swiss Express" anniversary. Multi-coloured interior details LED interior lighting built in as standard with buffer capacitors One coach with built-in tail lighting Restaurant car with lighted table lamps Restaurant car equipped with a digital interface Separable, current-conducting close couplers Many separately applied details Buffer height per NEM
In stock, shipped within 1-3 days
Prototype Two low-floor transport wagons, type Saadkmms, of the RAlpin AG (Olten), for the transit traffic of the "Rollenden Landstraße". Quartz grey basic paint scheme. The wagons look as they did starting in 2018. Model Metal wagon body. With two swivelling and removable buffer beams. Retaining wedges for lorry models, special couplers for low-floor wagons and special close couplers for coupling to vehicles with a standard coupler are included. They can also be coupled to vehicles with a low buffer height. Both wagons are packaged individually in an additional outer box. Total length over the buffers approximately 44.6 cm. DC wheelset E432950. Highlights Metal wagon body Special close coupler also suitable for vehicles with a lower buffer height
In stock, shipped within 1-3 days
Adapter cable 10-pin to 7-pin for connecting the Mobile Station 60653, the Mobile Station 60652 and the Trix Mobile Station 66950 to the 60125/60145 Terminal and a 3rd Mobile Station to the Central Station 60213-60215. Furthermore, for connecting a second Mobile Station 60652 to the 24088 feeder track or to the connector box 60115 (H0) or 60111 (Märklin 1).
In stock, shipped within 1-3 days
Extension cable for the main line with a 9-pin socket and a 9-pin plug for connecting a remotely located 60125/60145 Terminal. Length approx. 2 m.
In stock, shipped within 1-3 days
For converting Märklin/Trix H0 locomotives with a built-in high-efficiency motor or other DC motors. The märklin LokDecoder3 has a soldered-on wiring harness with an eight-pin NEM interface plug already fitted, for retrofitting many locomotives with a corresponding NEM interface and locomotives with limited space. The märklin LokDecoder3 supports the mfx, MM1, MM2 and DCC digital formats.
In stock, shipped within 1-3 days
For holding plastic or metal track. 3 clips for fastening the K tracks. Length 180 mm.
In stock, shipped within 1-3 days
Model For switching 4 twin-coil solenoid accessories with automatic cutoff. Automatic feedback of the position by means of LEDs when using the 75491 (K) or 74491 (C) point motors as well as the Minitrix 14934 and 14935 point motors. With 8 sockets on the back and 2 on the side. All of the connections are for the new plugs from the 71400 set. 8 matching plugs are included. Dimensions 80 x 40 mm. Highlights All of the connections with new plug connections. Matching plugs are included Function corresponds to the 7271 unit
In stock, shipped within 1-3 days
With a cross-head tip, size 00 (Ph). For the 74990 (C) and 7599 (K) track screws.
In stock, shipped within 1-3 days
Prototype Märklin K track. The track with many possibilities. The Märklin K track range offers the discerning model railway enthusiast every possibility for generous line routing and prototypical layout design. Model With a removable electromagnetic drive (75491). Inner curve 30°. Outer curve 30° at a parallel circuit spacing of 64.6 mm. The length and curvature of the inner curve correspond to 2221. With five track radii, flexible track, slender points and crossings, the Märklin H0 K track lets you create elegant model railway lines, narrow track spacing and gentle curves. The prototypical solid-profile rail, finely engraved sleepers without a ballast bed and the option of below-baseboard mounting of the point motors offer complete freedom for natural-looking design. Use our Gleisplanung planning software, item no. 60521, to plan your model railway. Highlights Prototypical solid-profile rail, finely engraved sleepers without a ballast bed Electrical operating reliability thanks to the proven centre conductor For everyone wanting to combine plastic tracks with metal tracks, there is the 2291 transition track
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin double slip combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Märklin double slip with a length of 188.3 mm / 24.3°. With a built-in 74491 electric point motor and an illuminated point lantern. The 74462 digital decoder can be retrofitted. The click connection with the "Click". Set up and taken down in no time at all. Sturdy and durable. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. To plan your model railway, use our planning software Gleisplanung, item no. 60521 Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin point combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and can even be combined with old track systems using special transition tracks. The ideal track system for newcomers and professionals. Model Length 236.1 mm. Crossing angle 12.1°. With a built-in 74491 electric point motor. With a manual control lever. Four 24071 tracks are required at the ends of the double slip (not included with the 24720). Two matching ballast base wedges are included. The 74477 point lantern and the 74467 digital decoder can be retrofitted. The Märklin H0 system: The Märklin track systems can be combined with each other at any time thanks to transition tracks. The reliably functioning centre conductor operation and the common return on both rails are always preserved, thus allowing great track routings without complicated wiring (for example, for reversing loops and track triangles). Perfect connection: The mechanical and electrical connection between two C tracks is not visible from the outside. The track thereby looks as if it were made from a single piece, just as on the prototype. Special fishplates are not necessary. Invisible strength: Thanks to this sturdy click connection on the underside of the track, the geometry of the track can be maintained precisely without having to screw the tracks down. They can thus be set up at any time and quickly taken down again. Anywhere! Versatile space: The ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Fast setup and takedown by means of the sturdy click connection, even on the carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype The Märklin uncoupler track combines robustness, electrically reliable connections and a prototypical appearance. The C track system can be expanded as desired and, with special transition tracks, can even be combined with older track systems. The ideal track system for newcomers and professionals. Model Märklin uncoupler track with a length of 94.2 mm. Electric. The click connection with the "Click". Assembled and dismantled in next to no time. Stable and durable. The Märklin H0 system: the Märklin track systems can be combined with one another at any time thanks to transition tracks. Reliable centre conductor operation and the common return on both rails are always retained and thus allow great track arrangements without complicated wiring (for example for reversing loops and track triangles). Perfect connection: the mechanical and electrical connection between two C tracks is not visible from the outside. The line thus looks as if it were made from a single length, just as on the prototype. Special fishplates are not required. Invisible strength: thanks to this stable click connection on the underside of the track, the geometry of the line can be maintained precisely without having to screw the tracks down. They can therefore be assembled at any time and quickly dismantled again. Anywhere! Versatile space: the ballast base (underside of the track) offers plenty of room for installing electric point motors or decoders, for laying cables and much more. All of this is completely invisible from the outside. Use our Gleisplanung planning software, item no. 60521, to plan your model railway Highlights Prototypical appearance with ballast, sleepers and rails made of metal Electrical operating reliability thanks to the proven centre conductor Quick assembly and dismantling thanks to the stable click connection, even on carpet
In stock: 5 on the shelf, shipped within 1-3 days
Prototype Two former Db type crew escort coaches of the Swiss Federal Railways (SBB/CFF/FFS). Pebble grey/blood orange basic paint scheme, in use as coupling coaches for the Swiss Express. The coaches look as they did starting in 1975. Model Completely new tooling for the Db type "Sputnik" crew escort coach. Type-specific underbody design with many separately applied details. Buffer height according to NEM. Separately applied grab rails, handbrake crank, gas box, and roof ventilators. With interior details. Length over the buffers approximately 21.3 cm. DC wheelset E700580. Highlights Completely new tooling for the "Sputnik" crew escort coach. For the "50 Years of the Swiss Express" anniversary. Many separately applied details Buffer height according to NEM
In stock: 5 on the shelf, shipped within 1-3 days
Model Receiver for controlling points, signals and uncoupling tracks. The m 83 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 83 has 8 outputs, each of which can be controlled separately or in pairs. The default setting is for controlling up to 4 points. Other functions include switching up to 8 lights (dimmable) with a defined switch-on behaviour (e.g. street lighting, building lighting). An external power feed, e.g. by means of the 66360, can be implemented, only in conjunction with the 60822. The m 83 and m 84 decoders can be connected in any sequence. One 60821 accessory set is required per pair of outputs for motorised drives. The connections are made by means of lift terminals. The maximum current-carrying capacity is 3A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days
Model Receiver for switching continuous current on and off for lighting, motors, Hobby colour light signals (74371, 74380, 74391) and other electrical accessories. The m 84 supports the Motorola, DCC and mfx digital formats. The digital address can be set with coding switches or by means of the programming track in steps of 4. The address range available goes up to address 320 in the Motorola format and up to address 2040 in the DCC format. The m 84 contains 8 relays in 4 electrically isolated groups for switching loads. By using a 66360 power supply, the bistable state of the relays and the storage of the switch setting can be implemented. 4 Hobby colour light signals and 4 Hobby distant signals can be controlled, with the option of switching the track current at the same time. The m 84 also contains 8 inputs for switching the relays manually (similar to the 7244 remote switch). The m 83 and m 84 decoders can be connected in any sequence. The connections are made by means of lift terminals. The maximum current-carrying capacity per group is 5A. Highlights Supports the mfx digital format LED indicators for quickly recognising operating states Can be updated
In stock: 5 on the shelf, shipped within 1-3 days
Model Feedback module with current sensors for layouts with a two-rail supply. Can be plugged into the L 88 (60883) with the connecting cable included. Connection socket for another s88 DC decoder (60882). 2x 8 inputs for current sensors (with optocouplers) in 2 different circuits can be combined into one circuit with 16 inputs. The L 88 (60883) is required for connecting s88 feedback units to the CS2 or CS3! Highlights All connections with lift terminals With a network cable
In stock: 5 on the shelf, shipped within 1-3 days
