H0 model trains, track and Z21
Roco, Swiss and European railways in H0
Re 460, Re 4/4 II "Swiss Express", BLS Re 465, EW II coaches and Hupac wagons: Roco reproduces Swiss and European railways in 1:87, often for both DC and AC, with its geoLine and RocoLine track and its Z21 digital command station.
- 1714items in the shop
- 1:87for your H0 layout
- Since 1960a brand from Salzburg

What Roco brings to your layout
- Swiss locomotives: SBB Re 460, Re 4/4 II, Re 10/10, Re 420 and Re 482, BLS Re 465 and Re 486, De 4/4 and RABe 502 multiple units.
- Two-rail or three-rail: many models come in a DC version and an AC version, often with sound.
- The Z21 command station: up to 9,999 DCC locomotive decoders, driven with the multiMAUS or the Z21 app for smartphone and tablet (iOS and Android). Updates by smartphone.
- Two track systems: geoLine, the track with integrated ballast, and RocoLine, with or without ballast, flexible track with wooden or concrete sleepers.
The Roco families
H0 rolling stock (1:87)
693 itemsLocomotivesElectric, diesel and steam, from the Re 460 and Re 4/4 II to classes from across Europe.See the items
61 itemsMultiple units and railcarsElectric multiple units and diesel railcars, including the De 4/4 and RABe 502.See the items
247 itemsPassenger coachesSBB EW II, Eurocity and IC2000 coaches, plus coaches from across Europe.See the items
248 itemsGoods wagonsCovered and open wagons, Hupac pocket wagons, rolling motorway.See the items
61 itemsCoach and wagon setsCoach and wagon sets to make up a train.See the itemsTrack and digital control
37 itemsgeoLine trackThe track with integrated ballast: straights, curves, points and accessories.See the items
116 itemsRocoLine trackWith or without ballast, flexible track and 10° and 15° points.See the items
70 itemsZ21 and electronicsCommand stations, handsets, decoders, cables and electronic accessories.See the itemsAll Roco items
Straight track G¼ with bedding. Length 57.5 mm (quarter standard length).
On order, shipped within 10-15 days
Digital feeder track with bedding. Length 115 mm (half standard length). This feeder track is not equipped with interference suppressors for radio interference suppression and therefore only approved for use in digital systems.
On order, shipped within 10-15 days
Circuit track with potential-free switching contact, with bedding. Length 115 mm (half standard length). Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to avoid switching spikes. With bumper protection Can also be used as a response instantaneous contact along with a response module or detector 10808.
On order, shipped within 10-15 days
Electric uncoupler track with bedding. Length 115 mm (half standard length). The electromagnetic drive is completely hidden inside the roadbed.
On order, shipped within 10-15 days
Feeder track with bedding and EMC interference suppressor. Length 115 mm (half standard length). Not suitable for digital operation!
On order, shipped within 10-15 days
Curved track R2 with bedding. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R3 with bedding. Radius 419.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R4 with bedding. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R5 with bedding. Radius 542.8 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R6 with bedding. Radius 604.4 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R9 with bedding. Radius 826.4 mm, arc angle 15°.
On order, shipped within 10-15 days
Curved track R10 with bedding. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.
On order, shipped within 10-15 days
Curved track R20 with bedding. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.
On order, shipped within 10-15 days
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Turnout right hand Wr15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Asymmetrical three-way turnout DWW15 with bedding, manually operated. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°. To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails. Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 spacers are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frogs
On order, shipped within 10-15 days
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Curved turnout left hand BWl2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days
Curved turnout right hand BWr2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days
Curved turnout left hand BWl9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Previous item no: 42568
On order, shipped within 10-15 days
Curved turnout right hand BWr9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Curved turnout left hand BWl3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
On order, shipped within 10-15 days
Curved turnout right hand BWr3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
On order, shipped within 10-15 days