RocoLine track
Curved track R6. Radius 604.4 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Sleeper end piece to match flex track with wooden sleepers (42400).
In stock, shipped within 1-3 days
Curved track R5. Radius 542.8 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Straight track DG1, diagonal straight element. Length 119 mm. The diagonal straight track makes the extension of the distance between the parallel tracks possible but the rail siding still remains on the grid line.
In stock, shipped within 1-3 days
Straight track G½. Length 115 mm (half standard length).
In stock, shipped within 1-3 days
Curved track R20. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.
In stock, shipped within 1-3 days
Straight track G1. Length 230 mm (standard length).
In stock, shipped within 1-3 days
Curved track R3. Radius 419.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R4. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Curved track R2. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.
In stock, shipped within 1-3 days
Straight track G4. Length 920 mm (4x standard length).
In stock, shipped within 1-3 days
Curved track R2¼. Radius 358 mm, arc angle 7.5°.
In stock, shipped within 1-3 days
Curved track R3¼. Radius 419.6 mm, arc angle 7.5°.
In stock, shipped within 1-3 days
Straight track G¼. Length 57.5 mm.
In stock, shipped within 1-3 days
Flex track F4 with wooden sleepers. Length 920 mm. Please note: Each FlexTrack requires a track end piece on only one side. Laying tips: Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw). For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.
In stock, shipped within 1-3 days
Flex track F4 with concrete sleepers. Length 920 mm. Please note: Each FlexTrack requires a track end piece on only one side. Laying tips: Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw). For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.
In stock, shipped within 1-3 days
Curved track R9. Radius 826.4 mm, arc angle 15°.
In stock, shipped within 1-3 days
Turnout right hand Wr15, without turnout mechanism. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°. An 8-mm spacer element (D8) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock, shipped within 1-3 days
Buffer stop (construction kit). Optionally with wood plank or bumpers. For all gauge H0 track systems. Content: 1 piece.
In stock, shipped within 1-3 days
Magnets to trigger the 42605 and 61193 sleeper. Very small construction, therefore can easily be mounted beneath any vehicle. Content: 6 pieces/package.
In stock: 4 on the shelf, shipped within 1-3 days
Electric uncoupler track. Length 115 mm (half standard length).
In stock: 4 on the shelf, shipped within 1-3 days
Turnout left hand Wl15, without turnout mechanism. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°. An 8-mm spacer element (D8) is included for diagonal installation. Suitable turnout mechanisms: 40295, 40297 or 10030. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
In stock: 4 on the shelf, shipped within 1-3 days
Curved turnout left hand BWl3/4, without turnout mechanism. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
In stock: 4 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr3/4, without turnout mechanism. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
In stock: 4 on the shelf, shipped within 1-3 days