RocoLine track
Turnout left hand Wl10 with bedding, manually operated. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Turnout right hand Wr10 with bedding, manually operated. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Single slip turnout EKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frogs
On order, shipped within 10-15 days
Double slip turnout DKW15 with bedding, manually operated. Design “Baeseler” with switch rails located at the outside. Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm. For diagonal installation two D4 and one D 12 spacers are included. Owing to the geometrical characteristics of this type of double slip turnout it is necessary to always use it polarized. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Crossing K15 with bedding. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking. Two D4 and one D12 spacers are included for diagonal installation. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM
On order, shipped within 10-15 days
Centrepiece for double crossover DGV15 with bedding. Length 115 mm, crossing angle 30°. Suitable in combination with 15° turnouts/diamond crossings with slips. The railroad lines that cross each other are not electrically isolated.
On order, shipped within 10-15 days
Sleeper end piece to match flex track with concrete sleepers (42401).
On order, shipped within 10-15 days
Flexible toothed racks for ROCO LINE tracks. Track length: each 230 mm. Flexible installation in straight and curved tracks Can be used from radius 2 (r= 358 mm) Content: 4 toothed rack elements 24 fastening chairs Fastening nails
On order, shipped within 10-15 days
Assembly aid for ROCO LINE toothed rack. For easy positioning of the fastening on the tracks Nailing aid
On order, shipped within 10-15 days
Rerailer makes it easier to place the vehicles on tracks. For all gauge H0 track systems.
On order, shipped within 10-15 days
Buffer stop (construction kit). Prototypical stable construction for all Gauge H0 track systems. Including 2 brake shoes to clip onto the rail. Content: 1 piece
On order, shipped within 10-15 days
DC track connections for turntable 42615. Content: 4 units 2L = track connections, suitable for turntable 42615.
On order, shipped within 10-15 days
AC track connectinos for turntable 42615. 3 units 3L ~ track connections, suitable for turntable 42615.
On order, shipped within 10-15 days
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (the version from production year 2019 on is compatible with RailCom) and can be programmed after installation. RailCom is a registered trademark of the Lenz GmbH, Gießen.
On order, shipped within 10-15 days
Substitute embankment slopes. The package contains 6 pieces, each with a length of 360 mm.
On order, lead time to be confirmed
Ballast board to fill in the spaces between the tracks in the train station area. Colour and grain size match the bedding track. 3 pieces/pack. Size 345 x 93 mm.
On order, shipped within 10-15 days
Track bed, suitable for 1 flex track with wooden sleepers (42400).
On order, shipped within 10-15 days
Track bed, suitable for 1 flex track with concrete sleepers (42401).
On order, shipped within 10-15 days