RocoLine track
Circuit track with potential-free switching contact, with bedding. Length 115 mm (half standard length). Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to avoid switching spikes. With bumper protection Can also be used as a response instantaneous contact along with a response module or detector 10808.
On order, shipped within 10-15 days
Electric uncoupler track with bedding. Length 115 mm (half standard length). The electromagnetic drive is completely hidden inside the roadbed.
On order, shipped within 10-15 days
Feeder track with bedding and EMC interference suppressor. Length 115 mm (half standard length). Not suitable for digital operation!
On order, shipped within 10-15 days
Curved track R2 with bedding. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R3 with bedding. Radius 419.6 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R4 with bedding. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R5 with bedding. Radius 542.8 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R6 with bedding. Radius 604.4 mm, arc angle 30°. 12 pieces are needed to form a full circle.
On order, shipped within 10-15 days
Curved track R9 with bedding. Radius 826.4 mm, arc angle 15°.
On order, shipped within 10-15 days
Curved track R10 with bedding. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.
On order, shipped within 10-15 days
Curved track R20 with bedding. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.
On order, shipped within 10-15 days
Turnout left hand Wl15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Turnout right hand Wr15 with bedding, manually operated. Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization. An 8-mm spacer element (D8) is included for diagonal installation. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Asymmetrical three-way turnout DWW15 with bedding, manually operated. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°. To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails. Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 spacers are included. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions! Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frogs
On order, shipped within 10-15 days
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails. Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm. For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts. Suitable turnout mechanisms (2 pieces are required): 42620 or 42624. Please note the operating instructions!
On order, shipped within 10-15 days
Curved turnout left hand BWl2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days
Curved turnout right hand BWr2/3 with bedding, manually operated. Radius of main track and branch track 358 mm (R2), arc angle 30°, polarization pre-installed. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Note: The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
On order, shipped within 10-15 days
Curved turnout left hand BWl9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Previous item no: 42568
On order, shipped within 10-15 days
Curved turnout right hand BWr9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days
Curved turnout left hand BWl3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
On order, shipped within 10-15 days
Curved turnout right hand BWr3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. New construction! Newly designed frog pieces ensure a smooth crossing Turnout opening/width in the frog piece area according to NEM standards
On order, shipped within 10-15 days
Curved turnout left hand BWl5/6 with bedding, manually operated. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog Previous item no: 42570
On order, shipped within 10-15 days
Curved turnout right hand BWr5/6 with bedding, manually operated. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable electric turnout drive: 42620 or 42624. Frog and wheel guide completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Pre-installed polarisation of the turnout frog
On order, shipped within 10-15 days