RocoLine track
Embankment end piece. These end pieces provide a neat closure of the roadbed at buffer stops, display cases, etc. The package contains 6 pieces.
In stock: 2 on the shelf, shipped within 1-3 days
Double slip turnout DKW15, without turnout mechanisms. Design “Baeseler” with closure blades located at the outside. Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm. For diagonal installation two D4 and one D 12 are included. Owing to the geometrical characteristics of this type of double slip turnout it is necessary to always use it polarized. Suitable turnout mechanisms (2 pieces are required): 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 1 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 1 on the shelf, shipped within 1-3 days
Curved point, left, BWl9/10, unpowered. The radius of the main track and the turnout track is 826.4 mm (R9), with a curve angle of 30°. Compatible point motors: 40295 or 40296 (electric point motor), 40297 or 40298 (hand-operated point motor), or 10030 (below-baseboard point motor). Please note the operating instructions!
In stock: 1 on the shelf, shipped within 1-3 days
Curved turnout right hand BWr9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions!
In stock: 1 on the shelf, shipped within 1-3 days
Turnout right hand Wr10, without turnout mechanism. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal installation. Suitable turnout mechanisms: 40296, 40298 or 10030.
In stock: 1 on the shelf, shipped within 1-3 days
Straight track G½ with bedding. Length 115 mm (half standard length).
In stock: 1 on the shelf, shipped within 1-3 days
Transition rail joiners. For rail systems with a 2.5-mm rail profile on the ROCO LINE track. Perfect for connecting FLEISCHMANN PROFI track to ROCO LINE track. Content: 24 pieces/pack.
In stock: 1 on the shelf, shipped within 1-3 days
2-pole connecting cable with mounted rail clips for ROCO LINE tracks. Only suitable for intermediate feeds due to insufficient cable cross-section. Cannot be used as the main connection of the model railway system!
In stock: 1 on the shelf, shipped within 1-3 days
Turntable with electric below-baseboard propulsion mechanism and control unit. Suitable for all NEM (European model railway standard) compatible two-rail DC and three-rail AC model railways. Bridge length: 253 mm; this is equivalent to 22 m on an original railway. The minimum angle between two track connections is 9 degrees. Spacers for 1°, 3°, 6° and 9° divisions are supplied with the turntable. This means that any division from 9° upwards in 1° stages between the track connections is feasible. The maximum number of track connections that can be made is 40. Four track connections for two-rail DC operation are supplied with the turntable. Further track connections are available as accessories (42616). If the turntable is to be used with a three-rail AC model railway, your specialist dealer will exchange the enclosed original DC pack to a pack of three-rail AC track connections (42617). The turntable bridge drive is powered by 14 V AC. Depending on the system used, traction power supply will either be DC or AC. The turntable is equipped with a control unit for preselecting the direction of rotation and starting the turntable rotation. When you let go of the turntable switch, the turntable halts exactly at the next track connection. Just like on a real-life turntable, it is also possible to choose between two rotation speeds. Traction power is fed in via the turntable. The traction voltage of the track connections can be assigned via the control unit. This prevents a locomotive that is currently parked from inadvertently moving off if two track connections are located directly opposite to one another.* One 1-meter 5-pole cable (connection between transformer and control unit) and one 2-meter 8-pole cable (connection between control unit with the turntable) are enclosed. Installation dimensions: Required installation opening: 280 mm. Installation depth measured from table top edge: 50 mm. External diameter of the turntable without track connections: 307 mm. Turntable bridge length: 253 mm. Suitable for all locomotives up to a total wheel base of 250 mm. * A terminal loop module is required when using the turntable in DCC mode (digital).
In stock: 1 on the shelf, shipped within 1-3 days
ROCO LINE track set B (tracks with bedding). Content: 13 straight tracks G1 (42510) 1 manual turnout left Wl15 (42534) 1 buffer stop kit (42608) 1 roadbed end piece (42651) Size: approx. 240 x 100 cm The track set A is the minimum layout contained in all starter sets with ROCO LINE with bedding and cannot be purchased separately. All other tracks sets are extensions of this layout. (A+B) Previous item no: 42010
On order, shipped within 10-15 days
ROCO LINE track set C (tracks with bedding). Content: 2 straight tracks G1 (42510) 1 straight track G½ (42512) 1 curved track R10 (42528) 2 curved tracks R2 (42522) 1 manual uncoupler track (G½) 1 manual curved turnout right BWr2/3 (42560) 1 manual turnout right Wr15 (42535) Size: approx. 230 x 100 cm The track set A is the minimum layout contained in all starter sets with ROCO LINE with bedding and cannot be purchased separately. All other tracks sets are extensions of this layout. (A+B+C) Previous item no: 42011
On order, shipped within 10-15 days
ROCO LINE track set D (tracks with bedding). Content: 9 straight tracks G1 (42510) 1 straight track G½ (42512) 1 curved track R2 (42522) 10 curved tracks R3 (42523) 2 manual tournouts left Wl15 (42534) 1 manual curved tounout left BWl2/3 (42556) 1 buffer stop kit (42608) 1 track end piece (42651) 1 substitute embankment slopes (42650) Size: approx. 250 x 105 cm The track set A is the minimum layout contained in all starter sets with ROCO LINE with bedding and cannot be purchased separately. All other tracks sets are extensions of this layout. (A+B+C+D) Previous item no: 42012
On order, shipped within 10-15 days
ROCO LINE track set E (tracks with bedding). Content: 2 straight tracks G½ (42512) 1 straight track G1 (42510) 2 manual tournouts left Wl15 (42534) 2 manual tournouts right Wr15 (42535) 1 manual uncoupler track (G½) 2 buffer stop kits (42608) 2 track end pieces (42651) Size: approx. 250 x 105 cm The track set A is the minimum layout contained in all starter sets with ROCO LINE with bedding and cannot be purchased separately. All other tracks sets are extensions of this layout. (A+B+C+D+E) Previous item no: 42013
On order, shipped within 10-15 days
Curved track R10. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.
On order, shipped within 10-15 days
Asymmetrical three-way turnout DWW15 without turnout mechanisms. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°. To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included. Suitable turnout mechanisms (2 pieces are required): 40296 (electric turnout mechanism right) or 10030 (below baseboard mechanism). Please note the operating instructions!
On order, shipped within 10-15 days
Curved turnout left hand BWI9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives
On order, shipped within 10-15 days
Curved turnout right hand BWr9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechanism), 40297 or 40298 (manual turnout mechanism) or 10030 (below baseboard mechanism). Please note the operating instructions! Frog completely revised Prototypical passing of the frog possible Groove width in the frog area according to NEM Polarisation of the turnout frog possible in combination with electric ROCO turnout drives Previous item no: 42477
On order, shipped within 10-15 days
Straight track G1 with white bedding. Length 230 mm (standard length). Ballast bed in snowy look Perfect for extending the track oval of the ROCO Christmas train
On order, shipped within 10-15 days
Straight track G4 with bedding. Length 920 mm (4x standard length).
On order, shipped within 10-15 days
Curved track R2¼ with bedding. Radius 358 mm, arc angle 7.5°.
On order, shipped within 10-15 days
Curved track R3¼ with bedding. Radius 419.6 mm, arc angle 7.5°.
On order, shipped within 10-15 days
Straight track G¼ with bedding. Length 57.5 mm (quarter standard length).
On order, shipped within 10-15 days
Digital feeder track with bedding. Length 115 mm (half standard length). This feeder track is not equipped with interference suppressors for radio interference suppression and therefore only approved for use in digital systems.
On order, shipped within 10-15 days