Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Digital DCC electronics

YaMoRC, DCC electronics for your layout

Command station, booster, accessory decoders and feedback modules: products made by modellers, for modellers.

Choose a family See all items

  • 26items in the shop
  • DCCthe control system
  • 3feedback buses: LocoNet, s88N, R-Bus
YaMoRC YD7010 DCC digital command station with WLAN and LAN

What makes YaMoRC

  • By modellers, for modellers: that is the motto of YaMoRC, a brand of Drenth Design & Consulting B.V. in Apeldoorn, the Netherlands. All products are designed by Karst Drenth.
  • Digital control first: DIGITAL is the first range the brand has launched: everything needed to run a DCC layout.
  • Feedback for every bus: 16-input modules for LocoNet with RailCom, s88N and R-Bus, with or without current sensors.
  • From turntable to reversing loop: turntable control with an adapter for Märklin and Roco turntables, a LocoNet RailCom reversing loop module, decoders for solenoid or servo point motors.

Our favourites

8-fold point decoder for solenoid point motors
YaMoRC YD8008
8-fold point decoder for solenoid point motors

Specially designed to cope with, high-current, solenoid point-motors, the YD8008 is our 8-fold solenoid decoder with intelligent CDU. It presents the following features: - Eight independent 9.5Amp solenoid outputs - Smart, 9400 uF CDU, monitoring charge levels for safe and powerful switching - Only 380 mA power consumption during charging - Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address - No complicated CV settings. - Clear-text configuration based upon our new ES-Link technology. With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface. No need for PC-software or Phone/Tablet Apps ! - or - when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration. - Eight address to output mappings, each mapping can a free choice address which can switch any and every output - Sequential output activation based upon pulse time and CDU charge level. - CDU startup delay adjustable to prevent tripping short circuit protection in boosters - Very modest power supply requirements. Even for SEEP/Gaugemaster motors a 15V/500mA wall wart is more than enough. - Not suitable for motorized point motors. For these motors, use our YD8116. This also counts for MTB point motors. - For two-wire solenoid motors, like Kato, adapter YD6940 should be used.

Regular price: CHF 68.00

In stock: 2 on the shelf, shipped within 1-3 days

New
16-fold LocoNet feedback module with RailCom
YaMoRC YD6016LN-RC
16-fold LocoNet feedback module with RailCom

The YD6016LN-RC is a feedback module for LocoNet with sixteen inputs and sixteen local RailCom detectors. Up to four locomotive addresses are detected per section via RailCom Channel 1 or Channel 2 and reported to the central station. An additional global detector monitors the track output. For vehicles without RailCom, the inputs also function as current sensors. The module supports reading out locomotive and accessory decoders via POM, as well as reporting QoS, speed, and container fill level. Power is supplied via the track input, with the connection to LocoNet T or B. An extension to 96 feedback units is possible via s88N-IN or ES-IN Link. Address range 1 to 4096 Occupancy detection from 3 mA 2 A per input, 4 A total Configuration and firmware update via USB

Regular price: CHF 127.00

On order, lead time to be confirmed

16-fold s88N feedback module with current sensors
YaMoRC YD6016ES-CS
16-fold s88N feedback module with current sensors

Our classic s88N feedback module with current sensing inputs It presents: - 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common - 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module - 5 Amp short duration overload (100ms) capable per detector. - 1-1.5mA current sensitivity - Capacitive input filter on every input, to suppress noise on long cables and track-sections - Configurable on- and off-delay setting for each input for optimal de-bouncing in case of non optimal wheel-track contact - ES-OUT-Link for direct connection to an ES-Link-master - ES-IN-Link connection to other ES-Link enabled modules for module-configuration - Standard s88N connections over RJ45 connectors and ethernet patch cables - Firmware updatable and settings configurable over ES-Link - Power supply directly from ES-Link or s88 bus

Regular price: CHF 69.00

In stock: 1 on the shelf, shipped within 1-3 days

Reversing loop module with LocoNet and RailCom
YaMoRC YD7432
Reversing loop module with LocoNet and RailCom

The YaMoRC solution for practically all polarity reversing tasks. It presents the following features: - 2-sensor short-circuit free operation. - alternative short-circuit detection mode - follow polarity with external (LocoNet) occupation feedback - follow polarity with turnout at entry - via LocoNet - via DCC - set turnout at exit - 100% solid-state, no relays - RailCom Block-, Address and Rail-Direction Report - LocoNet occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity - ES-Link occupation of S1, Track and S2 feedback, as well as short circuit status and track-polarity - ES-Link configuration - Firmware updatable - Current Ratings: - 2A - Continuous Operation - 2.5-2.75A Short Circuit Detection treshold. For reversing as well as short circuit shurdown. - 3.5A - Maximum Current during maximum 5 Seconds ( Command Station/Booster should switch off in this time )

Regular price: CHF 88.00

In stock: 1 on the shelf, shipped within 1-3 days

Switched-mode power supply, 15 V DC output, for booster and central station
YaMoRC YD7460-15
Switched-mode power supply, 15 V DC output, for booster and central station

The YD7460-15 is a switched-mode power supply with 15 V DC voltage and 4 A output for YaMoRC digital central stations and boosters, for example YD7010 or YD7403. According to the manufacturer, the 15 V version is suitable for Gauge TT and smaller gauges. The power supply is double-insulated (Protection Class 2), short-circuit and overload protected, and does not heat up when the central station or booster is idle. It has a compact design and a two-core low-voltage cable instead of a thin coaxial cable. It was manufactured in accordance with the manufacturer's specifications to match the YaMoRC boosters and central stations. Output 15 V DC, 4 A Protection class 2 Short-circuit and overload cut-off

Regular price: CHF 37.50

In stock: 1 on the shelf, shipped within 1-3 days

ES-Link connector, 5 pieces
YaMoRC YD6901ES-LINK
ES-Link connector, 5 pieces

The YD6901ES-LINK is the connector that establishes the ES-Link connection between two modules mounted directly next to each other. It is plugged into the ES-Link connections of the two modules, for example between a feedback module YD6016LN and a YD6016ES or a point decoder. This connection is used to expand feedback modules, configure modules with ES-PGM Link, and supply them with firmware updates. For greater distances between the modules, the adapter YD6902ES-EXT with an RJ45 cable is provided. A connector of this type is also included with the configuration stick YD9100. Connector for ES-Link between two modules Contents: 5 pieces

Regular price: CHF 14.00

On order, shipped within 3-8 days

All YaMoRC items

Filter products
ES-Link USB configuration stick
YaMoRC YD9100
ES-Link USB configuration stick

The YD9100 is a USB configuration module for all YaMoRC modules with an ES-PGM-Link or ES-OUT-Link connection, for example the YD8008, YD8044 and YD8116 decoders or the YD7403 booster. It provides a virtual COM port on the PC, through which the PC configuration software changes the settings of the connected modules and carries out firmware updates. The stick has a genuine FTDI USB chip and a mini-USB connection. The connection to the module is made using the supplied YD6901 connector; for greater distances, the YD6902ES-EXT adapter and an RJ45 cable are used. The manufacturer recommends a USB isolator. USB with virtual COM port Mini-USB socket Includes YD6901 ES-Link connector

Regular price: CHF 23.00

On order, shipped within 3-8 days

Network/Wi-Fi upgrade module for DR5000
YaMoRC YD9401
Network/Wi-Fi upgrade module for DR5000

The YD9401 is a retrofit module that replaces the RM04 WLAN/LAN module of the Digikeijs DR5000 digital central station. Together with the associated firmware, the DR5000 is converted into a YD7001 central station. The module provides a WLAN access point without an external router, a 100baseT LAN connection, and a built-in web server for configuration in a browser. The XpressNet-LAN, Z21, LocoNet Binary, LocoNet LBServer, and WiThrottle protocols can be used simultaneously via WLAN and LAN. The installation can be carried out by the user; a licence key must be requested by email to activate the module. Opening the DR5000 voids the Digikeijs warranty. Replacement for the DR5000 RM04 module WLAN access point and 100baseT LAN Configuration via web browser Installation requires: Windows PC, USB cable, cross-head screwdriver

Regular price: CHF 64.00

On order, shipped within 3-8 days

DCC digital command station based on DR5000, revision E
YaMoRC YD7001-E
DCC digital command station based on DR5000, revision E

The YD7001-E is a pure DCC digital command station with a 3 A output current and RailCom support. It is based on a brand-new, revised DR5000 main board with a pre-installed YD9401 network module, and it additionally measures input and track voltage. It controls up to 117 locomotive addresses and 2048 accessory addresses and supports DCCext. Connections: LocoNet T and B, XpressNet, Roco B-Bus, RS-Bus, S88 ES-Link, a fully functional programming track, USB, LAN and WLAN access point. In the network, the Z21, WiThrottle, LocoNet and XpressNet protocols are available. An IR receiver allows remote controls such as Uhlenbrock or Piko DigiFern. Formats such as mfx and Motorola are not supported. Track output 3 A Power supply 15 to 19 V DC, max. 3.5 A Programming track max. 750 mA Housing 157 x 88 x 22 mm

Regular price: Price to follow
Position sensor for Fleischmann turntables
YaMoRC YD7652HS
Position sensor for Fleischmann turntables

The YD7652HS is a position sensor board for use with all variants of Fleischmann turntables. The YD7652HS has been specially developed for turntables that no longer have ‘contact tabs’ on the bridge, which would otherwise make Basic-Plus operation (turning without the ‘click-clack’ sound) impossible. With this board mounted beneath the pit and a magnet beneath the turntable bridge, the bridge’s position is detected with pinpoint accuracy. It is also a cost-effective alternative to the YD7652ES sensor when there are more than 12 access tracks. It presents: - 48 Hall-effect sensors, highly sensitive - Extremely strong neodymium magnet included - ES-Link connected directly to the YD7652 via an RJ45 cable - All fixing materials included - Available for both large and small Fleischmann turntables - Very simple installation and adjustment

Regular price: Price to follow
Turntable adapter for stepper motors
YaMoRC YD7652ST-STEP
Turntable adapter for stepper motors

The YD7652ST-STEP is an extension of the turntable control YD7652 for connecting turntables with stepper motor drive. It contains a quiet stepper motor driver, whose settings are controlled by the processor, with micro-steps from 8 to 256 as well as dynamic acceleration and deceleration. A connection for a home or index sensor (for example Hall or infrared) is built in. The supply of the turntable track is passed through by the YD7652 with automatic polarisation. Supply 12 to 19 V Motor current max. 1.2 A Microsteps 8 to 256 Connection for home/index sensor

Regular price: Price to follow