Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rolling Stock

Locomotives, multiple units, coaches and wagons, new and pre-owned, from Z to G, checked by modellers.
Filter products
H0 Lidded Freight Car K DRG
Brawa 50778 Scale H0
H0 Lidded Freight Car K DRG

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Lidded Freight Car K DR
Brawa 50779 Scale H0
H0 Lidded Freight Car K DR

Prototype For the transport of moisture-sensitive goods, such as lime, the railways introduced so-called “Lidded Freight Cars” in various designs from a very early stage. In the second half of the 1920s, the development of this car type resulted in the K Elberfeld 80 001 ff., which met the requirements for the “Austauschbauart” (a design based on standardised components) that were valid at that time, and was standardised accordingly. The freight car had a length of 8.1 m (without handbrake) and 8.8 m (with handbrake), as well as the short 4 m wheel base that was typical for this period and had a maximum load of 17.5 t. In order to withstand this weight, the side panels and hinge lid were strengthened with prominent crossed beads. While the original paint was RAL 8012, with the undercarriage and offset fittings in RAL 9005, this quickly changed to light grey streaks when loaded with lime. The 991 freigt cars delivered by 1933 were also the last cars to be built in series. Although the lidded freight cars could be loaded mechanically, they could only be unloaded manually. As a result, the development of selfunloading cars for the transport of similar goods was already underway in the days of the Reichsbahn, and there were no significant new developments after the K25. Nevertheless, the vehicles classified by the Bundesbahn (Federal Railway) as K25 remained in regular service until the end of the 1960s and, in isolated cases, for even longer as service vehicles. Model Metal axle holders interchangeable type Individually mounted brake systems True to original construction differences Finely engraved rivets True to scale construction

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Refrigerator Car K2 SBB
Brawa 50780 Scale H0
H0 Refrigerator Car K2 SBB

Prototype The Swiss began standardising some types of goods wagons at an early stage. They were then also procured by all private railways in order to improve repairs and spare part stock-keeping. They included closed goods wagons with a 4.5 m wheel base and a frame length of 7.10 m. Later, the wheel base was increased to 5 m in order to improve the running characteristics. In this form, high numbers of the wagons that were given the K2 designation were procured by SBB. Model Tip bearing wheelsets Precise paintwork and painting Metal axle Precise replica of board joints True to original frame construction Metal axles

Regular price: CHF 49.55

On order, shipped within 10-15 days

H0 Tank Car K2 K.W.St.E.
Brawa 50782 Scale H0
H0 Tank Car K2 K.W.St.E.

Metal wheels Brake blocks in wheel plane Tip bearing wheelsets Free standing ladders Individually mounted railing Individually mounted signs Finely engraved details

Regular price: CHF 72.10

On order, shipped within 10-15 days

H0 Tank Car K2 "D.A.P.G." DRG
Brawa 50784 Scale H0
H0 Tank Car K2 "D.A.P.G." DRG

Metal wheels Brake blocks in wheel plane Tip bearing wheelsets Free standing ladders Individually mounted railing Individually mounted signs Finely engraved details

Regular price: CHF 72.10

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "Storck" DR Brit-US-Zone
Brawa 50798 Scale H0
H0 Tank Car 2-axle Z [P] "Storck" DR Brit-US-Zone

Prototype In the mid-1930ies, the progress in lightweight construction led to new generations in wagon building in rapid succession. The introduction of welded tanks allowed weight savings, the benefit of which was increased cargo weight. Consequently, the wheelbase of the classical two-axle tank wagon design was increased from 4.00 m to 4.50 m starting at the end of thirties. The running gear corresponded to the design which was simultaneously developed for the welded DR wagons, and was conspicuous by its long suspension springs for smooth running, even at higher velocities. The resulting design was built by many European wagon factories in very large numbers until 1943 – MAN alone, although no classical tank wagon manufacturer, delivered 2,250 units. In addition to a few private owners, the sham firms and camouflage organisations of the German Reich were predominantly supplied as part of the war preparations. These included the "Wissenschaftliche Forschungsgemeinschaft" ("Wifo") and various "oil associations" ("Oelvereine"). In another case, the wagon user was more clearly identified by the name "Wilhelmshaven Naval Dockyard"; these wagons were used for the fuel supply of the submarine fleet. In the aggregate, far more than 10,000 units of these wagons with tanks of 20 m3, 22 m3 and 26.5 m3 were probably built. After the war, they were scattered all over Europe and, as a result, came into the possession of many mineral oil industry companies as private wagons. In addition to the classical grey-and-black paint jobs, many wagons were given conspicuous advertising paint jobs from white and yellow (Mobil / Shell) to green and blue (Texaco / Aral). The last wagons were still being used in 1989 in the fleet of the GDR‘s Deutsche Reichsbahn. Model Metal axle holders Bogie with three-point support Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 40.50

On order, shipped within 10-15 days

H0 Low-loader Freight Car Uikk631 DB
Brawa 50801 Scale H0
H0 Low-loader Freight Car Uikk631 DB

Friedrich Krupp Maschinenfabriken AG built a total of 15 type St 309a low-loader wagons for Deutsche Bundesbahn (DB) between 1957 and 1966. These wagons were specially designed for transporting small but heavy goods. With a dead weight of approximately 15 tonnes, a maximum payload of 21 tonnes was possible. Due to the compact design, which was dominated exclusively by the curved solebar, it was not possible to equip the vehicles with a compressed air brake. To secure the wagons when they were parked, it was only possible to lock one wheel set via a handbrake. In addition to DB, the Dutch State Railway also purchased five of these vehicles from Krupp for the same purposes from 1962 onwards. In Germany, the last six wagons were retired from the DB AG inventory in 2004.

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Low-loader Freight Car Uikk631 DB AG
Brawa 50802 Scale H0
H0 Low-loader Freight Car Uikk631 DB AG

Friedrich Krupp Maschinenfabriken AG built a total of 15 type St 309a low-loader wagons for Deutsche Bundesbahn (DB) between 1957 and 1966. These wagons were specially designed for transporting small but heavy goods. With a dead weight of approximately 15 tonnes, a maximum payload of 21 tonnes was possible. Due to the compact design, which was dominated exclusively by the curved solebar, it was not possible to equip the vehicles with a compressed air brake. To secure the wagons when they were parked, it was only possible to lock one wheel set via a handbrake. In addition to DB, the Dutch State Railway also purchased five of these vehicles from Krupp for the same purposes from 1962 onwards. In Germany, the last six wagons were retired from the DB AG inventory in 2004.

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Flat Car Sggmrrs InnoFreight
Brawa 50803 Scale H0
H0 Flat Car Sggmrrs InnoFreight

Prototype Innofreight, as the name suggests, is fully committed to innovation in rail freight transport. The company claims that its self-developed InnoWaggons allow freight transport on the railways to be organised more efficiently than ever before. Innofreight achieves this efficiency by offering its InnoWaggons in three different lengths: 2x30 ft, 2x40 ft and 2x45 ft. Each vehicle consists of two short-coupled carrying wagons. The InnoWaggons can be fitted with a variety of different superstructures and transport racks by means of standardised folding container spigots. The wagons can thus be individually equipped and loaded for each customer and, if required, even for each transport assignment. This is certainly a very far-sighted innovation, especially given the increasingly complex approval procedures for rail vehicles. Model Replica of all three InnoWaggons double carriages Replica of the latest generation Y25 bogie Extra mounted brake-switch Fine engravings NEM-standard short-coupling True-to-original replica of the car bottom Wheelsets with inside contours Bogie with three-point support Without loading, for free arrangement

Regular price: CHF 112.70

On order, shipped within 10-15 days

H0 Covered Freight Car Gmhs 35 "Westfalia" DB
Brawa 50804 Scale H0
H0 Covered Freight Car Gmhs 35 "Westfalia" DB

Prototype The East-German National Railway (Deutsche Reichsbahn) was constantlystriving to expand and upgrade its vehicle fleet. The Gm(h)s Bremen can thus be seen as the successor to the Gms Oppeln design. Representing the state of the art, the Gm(h)s Bremen wagons were manufactured from 1943 onwards in a welded design and had an extremely long wheelbase of seven metres to ensure the required smooth running. In addition, 260 mm-high solebars were used for the first time, which were lighter and reduced costs by around 25% compared to the predecessor design, the Gms Oppeln. The exact number of wagons delivered by the end of the war is unknown. Based on the existing inventories, however, it can be assumed that at least 7,230 units were acquired by various state railways. In 1949, with growing transport volumes creating an urgent need to replace the large numbers of goods wagons lost during the war, the head office of the Reichsbahn in the British/US zone placed new orders that prompted the resumption of production of the Gm(h)s 35. In terms of the design, there were only minor changes compared to the original version. Without doubt, the most striking of these were the new vertical strut on the loading door and the omission of the front diagonals. The Deutsche Bundesbahn’s (DB) inventory was thus expanded by an additional 5,925 Gm(h)s wagons by the end of 1950. In the Soviet zone, the Deutsche Reichsbahn resumed production at the end of 1945 and classified these wagons as Gmhs 11. The Reichsbahn accumulated a total stock of about 800 wagons of this type, of which a large number were modernised at the Reichsbahn repair shed Magdeburg from 1967 onwards. The upgrades included UIC sliding loading doors and ventilation hatches as well as cladding on the upper third of the side panels. The wagons were also fitted with metal roofs and converted to wheel sets with roller bearings. Model Metal axle bearing Different design of the car bodies True to original frame construction Individually mounted axle box cover Brake blocks in wheel plane Individually mounted handrails, steps and brake systems Individually mounted axle brake rod Perforated car body supports

Regular price: CHF 47.75

On order, shipped within 10-15 days

H0 Tank Car 4-axle Zas "Wasserwagen" H.F. Wiebe
Brawa 50807 Scale H0
H0 Tank Car 4-axle Zas "Wasserwagen" H.F. Wiebe

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry of the GDR succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. As the GDR also exported these to obtain foreign currency, the cars also came to the NSW or non-socialist economic area with such transports. Model Precise paintwork and painting Individually mounted brake systems Etched walkway Individually mounted railing Finely detailes Y-25 bogie Brake blocks in wheel plane

Regular price: CHF 56.75

On order, shipped within 10-15 days

H0 Tank Car 4-axle Uia "DHL" GATX
Brawa 50808 Scale H0
H0 Tank Car 4-axle Uia "DHL" GATX

Prototype In the 1970s, the works of the GDR coach building industry produced almost exclusively for export. The DR therefore had to look elsewhere to replace the ageing fleet of vehicles and have more vehicles available for the increased transport requirements. This was partly solved by producing new cars in own repair shops but this technology was not suitable for special cars. At the beginning of the 1970s, the foreign trade ministry of the GDR succeeded in concluding comprehensive compensation business with France, as a result of which the DR received approx. 20,000 new freight cars of various classes. Among these, 1,250 four-axle mineral oil tank cars were delivered from 1975 onwards, which were classified under the documentation number 8105 and Class Uahs. Their number group began with 727 0000. The car had a welded undercarriage made of St 52-3 without middle longitudinal supports with bogies of type Y25Cs and a divided draw gear. The five-section tank made of 7mm steel plate (9mm in the floor area) has a volume of 85150 litres and therefore allows complete exploitation of the maximum permissible wheelset load at that time of 20t. The compressed air brake of type KE-GP with brake rod actuators and mechanical load braking was complemented by a handbrake operated from a platform and complied with the latest technical standards of that time. The cars were used above all in block trains mainly to transport fuels such as petrol and diesel. As the GDR also exported these to obtain foreign currency, the cars also came to the NSW or non-socialist economic area with such transports. Model Precise paintwork and painting Individually mounted brake systems Etched walkway Individually mounted railing Finely detailes Y-25 bogie Brake blocks in wheel plane

Regular price: CHF 56.75

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50809 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50810 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50811 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Passenger Coach B4mgl DR
Brawa 50812 Scale H0
H0 Passenger Coach B4mgl DR

Prototype In the early 70ies, the DR planned to improve the gastronomic supply in the domestic express trains. In addition,many of the pre-war restaurant cars still in use were waiting to be taken out of service. The DR therefore considered the procurement of new restaurant cars. Delivery by the wagon building industry of the GDR was not possible for capacity reasons; hence the manufacture in DR repair sheds remained as sole alternative. Although the Mitropa factory in Gotha had constructed six cars fromolder vehicles as "Reko coaches" already in 1960, a new design on the basis of the Bghw coaches manufactured in Halberstadt was decided. These were built as completely new types and did not comprise any used parts. Atotal of fifty vehicles designated as WRge emerged intwo series in 1973 (20) and 1977 (30). They received the typical wine-red Mitropa paint coating with inscriptions in four languages, but without the previously used decorative lines. Both series were only different in two windows in the kitchen section which were supposed to improve the lighting conditions in this area. With a maximum velo city of 140 km/h and a multi-voltage heating, the coaches were capable of being used internationally and thus also reached destinations in the FRG and CSSR. After the modification of the major part of the cars, just five original restaurant cars with the red paint were still in operation in 1989. Although the restaurant cars were to receive the new type number 541, they were completely decommissioned by 1993. Due to their short length and the robust furniture and implements, many of them found a new home with museum railway organisations. Model True to original doors Precise replica of the „Görlitz V“ bogies Interior fittings in multicolour painting NEM-standard short-coupling True to scale windows Precise paintwork and painting Passageway between coaches with separately mounted rubber beading

Regular price: CHF 67.60

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50828 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 569.05

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50829 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 822.65

On order, shipped within 10-15 days

H0 Express Train Set E 1642 DB, set of 5
Brawa 50830 Scale H0
H0 Express Train Set E 1642 DB, set of 5

Prototype With the goal of improving rail connections between the less structurally developed regions and the major conurbations, the Bundesbahn launched an improved service for its customers in the 1950s. The aim was to enable passengers to reach their destination in the nearest major city without changing trains if possible. The resulting repurposed express trains were well received by the public. The chosen routes largely avoided the main lines and arteries, earning these trains the nickname “hedgerow express". One such train was the E 1642, which was commissioned in 1974. This train travelled from Braunschweig to Aachen via Kreiensen – Holzminden – Wehrden (Weser) – Beverungen – Scherfede – Brilon Wald – Schwerte – Hagen – Wuppertal – Cologne. Model Diesel Locomotive BR 216 (Road no. 216 209-7) Luggage Car MDyg986 (Road no. 50 80 92-11 850-6) 2 x Passenger Coach 2nd class (Road no. 50 80 21-11 220-8 / 50 80 21-11 388-3) 1 x Passenger Coach 1st / 2nd class (Road no. 50 80 30-11 054-0)

Regular price: CHF 827.15

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50843 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 762.15

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50844 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 1,037.40

On order, shipped within 10-15 days

H0 Train Set F 3/4 Merkur DB, set of 5
Brawa 50845 Scale H0
H0 Train Set F 3/4 Merkur DB, set of 5

Prototype Reconstruction in Germany was in full swing when the Federal Railway (DB) launched a network of F-trains for official and commercial transport in the summer of 1951. This internationally recognised move by the DB was a clear response to the emerging trend of private motorised transport and the rapidly growing aviation industry. From the outset, the F 3/4 train service, which ran from Frankfurt (M) via Cologne to Hamburg and back, was part of this train network. In 1952, these trains were given the name “Merkur” (Mercury), representing the Roman god of trade, merchants and travellers. Over time, the Merkur trains underwent frequent changes in appearance, and the line was also adapted to suit customer needs. Initially, BR 01-series locomotives were used to pull these trains. In subsequent years, vehicles of the series 03, 03.10, 18.5, 18.6, 39, V200 and E18 took turns as train locomotives. From the summer of 1959 to 1961, the F3 line was redirected from Frankfurt via Wiesbaden central station. The rolling stock had already transitioned to the new 26.4 metre-long 1st class carriages including an old-style dining car of the type WR4ü-28, -35 or -39. During the summer of 1959, the 01 149 locomotive from the Darmstadt railway depot was regularly deployed on this section of the line. No doubt driven by economic considerations, the task of pulling the trains was later given to the BR 01 locomotives from the Wiesbaden railway depot, as visually documented by our 01 115. Model Express Train Locomotive BR 01 DB (Road no. 01 115) Express Train Coach A4ümg-54 DB (Road no. 11 918 Ffm) Express Train Coach A4ümg-54 DB (Road no. 11 855 Stg) Express Train Coach A4ümg-54 DB (Road no. 11 904 Stg) Dining Car WR4ü-28/51 DSG (Road no. 12 30)

Regular price: CHF 1,050.95

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Ölverein" DRG
Brawa 50846 Scale H0
H0 Tank Car 2-axle Z[P] "Ölverein" DRG

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "B.V.-Aral" DRG
Brawa 50847 Scale H0
H0 Tank Car 2-axle Z [P] "B.V.-Aral" DRG

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days