Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Rolling Stock

Locomotives, multiple units, coaches and wagons, new and pre-owned, from Z to G, checked by modellers.
Filter products
H0 Tank Car 2-axle Z[P] "VTG" DB
Brawa 50848 Scale H0
H0 Tank Car 2-axle Z[P] "VTG" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "HOBUM" DB
Brawa 50849 Scale H0
H0 Tank Car 2-axle Z [P] "HOBUM" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Esso" DB
Brawa 50850 Scale H0
H0 Tank Car 2-axle Z[P] "Esso" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z [P] "BP" DB
Brawa 50851 Scale H0
H0 Tank Car 2-axle Z [P] "BP" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z DR
Brawa 50852 Scale H0
H0 Tank Car 2-axle Z DR

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Zw DR
Brawa 50853 Scale H0
H0 Tank Car 2-axle Zw DR

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Esso" DB
Brawa 50855 Scale H0
H0 Tank Car 2-axle Z[P] "Esso" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "VTG" DB
Brawa 50856 Scale H0
H0 Tank Car 2-axle Z[P] "VTG" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "BP" ÖBB
Brawa 50857 Scale H0
H0 Tank Car 2-axle Z[P] "BP" ÖBB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "EVA" DB
Brawa 50860 Scale H0
H0 Tank Car 2-axle Z[P] "EVA" DB

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "Dapolin" DRG
Brawa 50861 Scale H0
H0 Tank Car 2-axle Z[P] "Dapolin" DRG

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Tank Car 2-axle Z[P] "NITAG" DR Brit-US-Zone
Brawa 50862 Scale H0
H0 Tank Car 2-axle Z[P] "NITAG" DR Brit-US-Zone

Prototype By the end of the 1920s, the Deutsche Reichsbahn had completed its own development programme for standardised replaceable running gear. The wagon industry installed this running gear in countless wagons from 1928 onwards, which greatly simplified the subsequent installation of spare parts during vehicle maintenance and thus contributed to significant cost savings. Tank wagons with a capacity of 19.2 m³ were among the first types to use the new replacement components. These wagons were often used to transport various flammable liquids such as fuel oil, tar oils or vegetable oils. The many small orders received from a variety of customers and vehicle manufacturers resulted in numerous wagon variants that differed slightly in terms of the finer details. What they all had in common, however, was the use of a uniform undercarriage in a riveted design with a wheelbase of 4 m and a length over buffers of 8.8 m. Due to the limitations of welding technology circa 1928, most of the boilers were still produced using conventional rivet construction. Over 1,000 wagons were built between 1928 and 1938, the last of which remained in service in Germany until 1983. Model Metal axle holders Multi-part brake system Brake blocks in wheel plane Individually mounted axle box cover Free standing ladders Individually mounted railing

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Flat Car Xr35 DB, with load "Railway sleeper"
Brawa 50887 Scale H0
H0 Flat Car Xr35 DB, with load "Railway sleeper"

Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Flat Car Xr35 DB, with load "Railway sleeper"
Brawa 50888 Scale H0
H0 Flat Car Xr35 DB, with load "Railway sleeper"

Prototype Work wagons have always been indispensable for the railway company.They were used, for example, on every working site, how ever small, to transport construction materials such as crushed stone or tools. However, as no money could be earned with these so-called X-wagons by the transport of goods for third parties, the intent from the beginning was to find cheap solutions for the procurement of work wagons. A solution that offered itself for this purpose was to refurbish wagons of older types by modification and to adapt them to the new requirements. Due to the continuously changing demand and the decommissioning of worn wagons, the number of the X-wagons strongly fluctuated time and again between around 48,500 (1920), 25,000 (1930), 41,500 (1943) and 15,000 (1953).The Xr-35 type selected by BRAWA is based on Gms-30 type wagons that lost their wagon bodies in the early 50s, or already before due to damage suffered during the war. The remaining undercarriages were equipped with new, stable side panels, thus adapting the wagons to the changed task areas. Model Perforated car body supports Individually mounted brake systems Metal axle holders Individually mounted axle box cover Individually mounted steps

Regular price: CHF 54.05

On order, shipped within 10-15 days

H0 Through Train Set D 1050 DR, set of 6
Brawa 50892 Scale H0
H0 Through Train Set D 1050 DR, set of 6

Prototype In order to make daily journeys from the larger urban centres to the capital easier, the East German Deutsche Reichsbahn (DR) introduced a city express service to Berlin at the end of 1960. These connections, designed as through trains, had fewer stops compared to normal D trains, which resulted in shorter journey times. Each morning, the city express train – originally designated as the D 150, and from 1975 onwards as the D 1050 – travelled conveniently from Meiningen to Berlin-Schöneweide via Suhl, Erfurt, Weimar, Halle and Berlin-Schönefeld Airport. In the evening, passengers could complete the return journey to Meiningen aboard the D 1057. In both directions, the locomotives were switched from combustion traction (“V traction") to electric traction (“E traction") in Erfurt. Following the timetable change in May 1989, the designation for the city express service was dropped and the last remaining connections were absorbed into the DR’s normal service. Model Electric Locomotive BR 211 (Road no. 211 080-7) Luggage Car (Road no. 57 50 82-15 025-2) Dining Car WRg (Road no. 51 50 88-15 041-9) 2 x Passenger Coach Bmh (Road no. 50 50 21-12 062-9 / 50 50 21-12 063-7) Mail Car (Road no. 50 50 00-10 456-0) Passenger Coach (Order no. 50797) is a suitable add-on car for the BRAWA D 1050 train set.

Regular price: CHF 595.10

On order, shipped within 10-15 days

H0 Train Set "Höllentalbahn" DB, set of 5
Brawa 50894 Scale H0
H0 Train Set "Höllentalbahn" DB, set of 5

Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)

Regular price: CHF 629.30

On order, shipped within 10-15 days

H0 Train Set "Höllentalbahn" DB, set of 5
Brawa 50895 Scale H0
H0 Train Set "Höllentalbahn" DB, set of 5

Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)

Regular price: CHF 791.75

On order, shipped within 10-15 days

H0 Train Set "Höllentalbahn" DB, set of 5
Brawa 50896 Scale H0
H0 Train Set "Höllentalbahn" DB, set of 5

Prototype The Höllentalbahn (from Freiburg central station via Neustadt/Schwarzwald to Donaueschingen) rightfully ranks among the most impressive stretches of railway in Germany thanks to its breathtaking route through the narrow Höllental (Hell Valley) with gradients of up to 57.14 per mille. Today, it is deservedly registered as a culturally significant monument in the Southern Upper Rhine region. In 1933, the line was electrified with a voltage of 20kV and a frequency of 50Hz. At the same time, the fleet was modernised with the BR 85 and E 244 locomotives as well as Ci-33 and BCi-34 light branch line carriages. It was not until May 1960 that the voltage was switched to the now standard 15kV at 16²/3 Hz. Consequently, the E 244 was promptly succeeded by the E44w from the Freiburg railway depot. These vehicles provided the electric traction on the Höllentalbahn and also pulled the typical passenger trains that were used on this line, consisting of various standard secondary line coaches. Model Electric Locomotive BR E44w DB (Road no. E44 176) Passenger Coach ABie-34 DB (Road no. 39 025 Kar) Passenger Coach Bie-33 DB (Road no. 98 083 Kar) Passenger Coach Bie-33 DB (Road no. 98 101 Kar) Luggage Car Pwie-30 DB (Road no. 114 832 Kar)

Regular price: CHF 791.75

On order, shipped within 10-15 days

H0 Train Set N 2570 DB, set of 4
Brawa 50897 Scale H0
H0 Train Set N 2570 DB, set of 4

Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)

Regular price: CHF 505.05

On order, shipped within 10-15 days

H0 Train Set N 2570 DB, set of 4
Brawa 50898 Scale H0
H0 Train Set N 2570 DB, set of 4

Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)

Regular price: CHF 775.80

On order, shipped within 10-15 days

H0 Train Set N 2570 DB, set of 4
Brawa 50899 Scale H0
H0 Train Set N 2570 DB, set of 4

Prototype The introduction of push-pull-capable locomotives from the V100.20/212 series and the modern “n-Wagen” (stainless steel regional coaches) in the early 1960s presented Deutsche Bundesbahn (the Federal Railway) with an opportunity to significantly streamline its operations. The resulting changes were particularly evident in regional services, where many outdated steam locomotives and pre-war passenger carriages were replaced by new diesel locomotives and modern rolling stock. The Wuppertal-Steinbeck railway depot was among the first to phase out steam locomotive maintenance in favour of diesel vehicles as early as September 1953. The diesel locomotives stationed there were primarily used to serve the Bergisches Land region, which posed significant operational challenges due to its numerous main and branch lines. The N 2570 was a regular service on these routes and, in 1974, featured a Steinbeck-based 212 locomotive coupled with three n-Wagen coaches on the route from Remscheid Hbf to Wuppertal-Vohwinkel. Model Diesel Locomotive BR 212 DB (Road no. 212 097-0) Passenger Coach ABnb703 DB (Road no. 50 80 31-11 374-1) Passenger Coach Bnb719 DB (Road no. 50 80 22-11 183-7) Passenger Coach BDnf738 DB (Road no. 50 80 82-11 263-4)

Regular price: CHF 829.95

On order, shipped within 10-15 days

H0 Covered Freight Car Gos253 DB AG
Brawa 50907 Scale H0
H0 Covered Freight Car Gos253 DB AG

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Covered Freight Car Gos245 Wiebe
Brawa 50908 Scale H0
H0 Covered Freight Car Gos245 Wiebe

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours

Regular price: CHF 45.05

On order, shipped within 10-15 days

H0 Covered Freight Car Gos[1404] DR
Brawa 50909 Scale H0
H0 Covered Freight Car Gos[1404] DR

Prototype Based on the UIC standard coach Gmhs 53, DB developed a 2-m longer waggon which otherwise complied with the UIC requirements in all its equipment features. Unlike its predecessor, it already had the newly standardised 2-m-wide loading door. At the time, UIC was not able to agree on a larger standard design, so this emerged only later in the form of the Glmms 61. Therefore, the waggon - designated Glm(e)hs 50 - was only a little longer than the pre-war large-capacity covered freight cars, which caused a great deal of controversy even at the time of construction. Even then, there were demands for a waggon with a loading length of at least 12.5 m, which meant the enlargement of the loading space did not go far enough for many customers, while others considered the waggons were too far removed from UIC requirements. Despite all these issues, some 12,000 waggons were built from 1953 – 1958 – up to 1954 with board walls, then with plate walls. Some one quarter of all waggons were fitted with a handbrake, at first with the characteristic sheet metal brakeman's cab. At least 700 waggons featured electric heating so that they could compete in express goods traffic in passenger trains. Some waggons were rented long-term and painted with advertising of the renting company. By the mid-seventies, the waggons with board walls had been decommissioned or upgraded with plate walls. Since 1965, the Glm(e)hs 50 were designated Gbrs(-v) 245, in 1980 after the heating pipes were mostly removed, they were renamed Gos(-uv) 245. Then, in the 80s, the inventory started to be reduced, although larger inventories were sold to DR In 1997, 35 waggons were still in the inventory, and the last three were taken out of service in 2000. Model Brake blocks in wheel plane Bogie with three-point support Individually mounted axle brake rod Individually mounted brake systems True to scale narrow frame Metal axle holders Wheelsets with inside contours

Regular price: CHF 45.05

On order, shipped within 10-15 days