Rolling Stock
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, shipped within 10-15 days
Prototype Before the war, standardised large containers were already beginning to be transported right to the customer with rail and road vehicles. The outbreak of the Second World War stopped the further spread of the system, however. In 1949, the Deutsche Bundesbahn (DB) returned to the "pa" container system (pa: French abbreviation for "porteur am nager") and decided to introduce it on a large scale. While the containers were newly constructed, the DB fell back on underframes of various pre-war wagons that were available in ample numbers, but had suffered war damage to the superstructures. During the conversion work, undercarriages from Omm 34, which were classified as BT(hs) 30, were used in a common number range with BT wagons repurposed from other donor wagons. After the refurbishing of a total of 273 BT 30, the exclusively new construction of container waggons started in 1952. Shortly after being renumbered in Lb(r)s 577, the last refurbished BT 30 waggons were taken out of service in 1971. There were numerous open and closed containers for the greatest variety of cargoes, and moreover, there were special containers for liquids, foodstuffs such as beer, and for the transport of frozen goods. From the end of the 60s, increasingly crowded out by the emerging containers, transport with the "pa" containers ceased at the end of the 90s. Model With 3 containers Brake shoes in wheel plane Three-point support Model with transition platform or hand-brake platform Perforated coach body supports Wheelsets in toe bearing True to original frame construction Individually mounted axle brake frame and axle box cover Perforated frame Extra mounted brake system, handrails and steps
On order, lead time to be confirmed
Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover
On order, shipped within 10-15 days
Prototype Innofreight, as the name suggests, is fully committed to innovation in rail freight transport. The company claims that its self-developed InnoWaggons allow freight transport on the railways to be organised more efficiently than ever before. Innofreight achieves this efficiency by offering its InnoWaggons in three different lengths: 2x30 ft, 2x40 ft and 2x45 ft. Each vehicle consists of two short-coupled carrying wagons. The InnoWaggons can be fitted with a variety of different superstructures and transport racks by means of standardised folding container spigots. The wagons can thus be individually equipped and loaded for each customer and, if required, even for each transport assignment. This is certainly a very far-sighted innovation, especially given the increasingly complex approval procedures for rail vehicles. Model Replica of all three InnoWaggons double carriages Replica of the latest generation Y25 bogie Extra mounted brake-switch Fine engravings NEM-standard short-coupling True-to-original replica of the car bottom Wheelsets with inside contours Bogie with three-point support Without loading, for free arrangement
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover
On order, shipped within 10-15 days
Prototype In 1942, Tnf Berlin (Tnfs38) came into being as a simplified refrigerator car. The basic design was provided by the Glmhs Dresden, as a welded version. In contrast to these, the refrigerator cars were given 300 mm thick insulation and zinc plate inner lining in order to protect the internal wood cladding against moisture penetration. In order to ensure that the doors sealed completely, the double-leaf revolving doors were replaced with sliding doors. However, the most significant change was the vertical panelling combined with the typical white paint of the refrigerator cars. From the mid-1950s onwards, the German Federal Railway (DB) carried out several design modifications and modernisation work on the coaches it had acquired. The maintenance-intensive wheelsets with slide bearings were replaced with roller bearings; car bodies were rebuilt with the same design if their insulating properties were inadequate. As a result, the coaches retained their main dimensions; however, the eye-catching car body frame was now hidden under horizontal panelling, and later even under laminated wood panelling. New refrigerator car developments at DB made it possible for private breweries to purchase a variety of cars from DB and use them for transporting their beer. Since these were private cars belonging to specific breweries, in most cases they were decorated with the company’s own advertising. Model Axle brake frame with brake blocks in wheel plane Individually mounted brake systems Individually mounted handle bars Individually mounted wheelchocks Individually mounted steps NEM-standard short-coupling Metal wheels True to original frame construction Wheelsets with inside contours Perforated car body supports True to original construction differences
On order, shipped within 10-15 days
Prototype Tariff conditions on the one hand and technical conditions on the other resulted in all State railway administrations developing box cars with almost identical dimensions and payloads. These cars had a 4.5 m wheelbase, a length over buffers of 9.3 m for unbraked cars, a payload of 15 t, later 17 t and a floor area of approx. 21 square metres. This type of freight construction became the most important and most built box car; it originally had the type identifier Gm. The most common of these State railway cars, which numbered 47,533, were built according to the Prussian style sheet IId8. After the founding of the Deutscher Staatsbahn Wagen Verband (German state railway car federation) DWV in 1909, the federation car construction type A2 was developed from this. From 1911 a phenomenal total of 121,770 units were built, making it the most heavily produced box car. It dominated the image of the German goods trains until the early days of the third era. These cars were scattered all over Europe by two world wars, there were no European railway administrations where this type of car was not used at least temporarily. Model True to original frame construction Precise replica of board joints Metal wheels and axles Multi-part brake system Individually mounted signal holder Brake blocks in wheel plane Perforated car body supports Precise paintwork and painting Individually mounted axle box cover
On order, shipped within 10-15 days
Prototype The association construction types of the German national railway association already included an open-plan covered freight car, which was used in particular for freight with a high weight and low volume. After the foundation of the DRG, the main standard freight cars were redesigned according to the so-called principles of interchangeability. For this the production tolerances were kept so small that it was very easy to change replacement parts. The design of the new open-plan freight car was heavily based on its association type predecessor. The main dimensions such as wheelbase and length over buffers was adopted, as were the two metre wide doors opening to the right, which however were installed suspended. New features included the riveted strut bracing, which allowed a lower design of the longitudinal beam, and the barrel design of the roof instead of the basket arch of the predecessor cars. Some of the cars had a handbrake with brakeman’s cab and/or variable gauge wheel sets for adaptation to Russian wide gauge, identifiable by the white painted buffer sleeves and the sub-class mark "r". All covered open-plan cars were allocated to the "Dresden" class district. As already mentioned, the cars were particularly suitable for light freight with large volumes (e.g. glass industry). When the design was revised later, a few changes were made, for example longer and softer suspension springs, which allowed higher speeds and therefore also use in passenger trains. Due to the turmoil of the war, not only the two German railway administrations but also many other European railways had cars of this type in their stock after 1945. The last ones were only retired in the 1980s - proof of the quality and durability of the design. Model Axle holders made of embossed sheet metal Individually mounted wheelchocks Fine replica of the wheel bearing Individually mounted brake switch NEM-standard short-coupling True to original car bottom Wheelsets with inside contours
On order, shipped within 10-15 days
Prototype Although its payload was lower than that of the newer cars of Classes Gm and Glm, Bavaria was not able to dispense with the older G-cars. In particular when transporting lighter package freight, e.g. products of the large glass industry in the Bavarian forest, the limited load-bearing capacity did not play a role. Therefore the older cars also had red-brown livery after 1912 and were assigned to the newly created “Regensburg” grouping. All cars with a payload of less than 15 tonnes were included in this group. Model Metal wheels Tip bearing wheelsets Precise replica of board joints Fine replica of the wheel bearing True to original brake unit Individually mounted handrails Individually mounted signal holder
On order, shipped within 10-15 days