Skip to main content Skip to search Skip to main navigation
Swiss model railway specialists Shipped from Switzerland Märklin · Trix · LGB

Locomotives

Filter products
13% off the recommended price
ICE 4 Class 412/812 Powered Railcar Train
Trix 22971 Scale H0
ICE 4 Class 412/812 Powered Railcar Train

Prototype ICE 4 high-speed train as class 412/812 of the Deutsche Bahn AG (DB AG). 1 end car EW 1.2-H, class 812, 1st class. 1 restaurant car RW "Bordrestaurant", class 812, 1st class. 1 service car TW 2.2, class 412, 2nd class. 1 intermediate car MW 2-H, class 812, 2nd class. 1 end car EW 2.2-H, class 812, 2nd class. Multiple unit 9010 as ICE 786, for the train run München Hbf - Würzburg Hbf - Fulda - Hamburg-Altona. Current operating condition in 2019. Model 5-part version to a scale length of 1:87. The train has a digital decoder and extensive sound and light functions. It also has a centrally mounted, regulated high-performance motor with a flywheel in the on-board restaurant car. All 4 axles in both bogies are powered using cardan shafts. Traction tyres. The cabs of the end cars have interior details. Power is supplied through whichever end car is leading, depending on the direction of travel. Special close couplers guided in a slot. The triple headlights and two red tail lamps change over with the direction of travel; they will work in conventional operation and can be controlled digitally. Interior lighting fitted as standard. The interior lighting is supplied through the continuous electrical connection running the length of the whole train. Different colour scenarios for the interior lighting can be controlled digitally. In addition, the cab lighting can each be controlled separately digitally. All of the lighting uses maintenance-free warm white and differently coloured LEDs. Both pantographs on the service car can be raised and lowered separately as a digital function. The minimum radius for operation is 437.5 mm. Length of the train 151.5 cm. Highlights Completely new tooling LED interior lighting fitted as standard Different lighting scenarios for the interior lighting can be controlled digitally Pantographs on the service car can be raised and lowered by means of a digital function Digital decoder with extensive light and sound functions. The 5-part base set can be expanded with a 3-part add-on set and an additional single intermediate car Note The 5-part base set 22971 can be expanded with the 3-part add-on car set 23971 as well as the single intermediate car 23972.

  • 2-rail, direct current
  • Sound

Selling price: CHF 725.20 RRP CHF 839.00

On order, shipped within 10-15 days

13% off the recommended price
Class 92 Steam Locomotive
Trix 22993 Scale H0
Class 92 Steam Locomotive

Prototype Class 92 steam locomotive. Version as an exhibition locomotive of the Dampflok-Erlebniswelt in Meiningen. Lettered as 92 739 in the appearance of the German Federal Railway. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. Four axles powered. Traction tyres. The dual headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. The lighting uses maintenance-free warm white LEDs. Screw couplers are included as separate plug-in parts. An enclosed booklet provides information about the history of the locomotive. Length over the buffers 12.8 cm. Highlights With a booklet about the history of the locomotive Digital decoder with extensive light and sound functions

  • 2-rail, direct current
  • Sound

Selling price: CHF 310.30 RRP CHF 359.00

On order, shipped within 10-15 days

13% off the recommended price
Class 77 Diesel Locomotive
Trix 22996 Scale H0
Class 77 Diesel Locomotive

Prototype JT42CWRM diesel electric goods train locomotive, better known as the Class 77. Diesel locomotive of Euro Cargo Rail, hired out to DB Schenker Rail Deutschland. Running number 247 047-4. The locomotive looks as it did around 2018. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a centrally mounted, regulated high-performance motor with a flywheel. 4 axles powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel; they will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function works at both ends. Cab lighting can be controlled digitally. Control desk lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. Smoke generator fitted as standard. Many separately applied details. Detailed buffer beam. Plug-in brake hoses are included. Locomotive with authentic weathering. Length over the buffers approximately 24.7 cm. Highlights Cab lighting can be controlled digitally Control desk lighting can be controlled digitally Smoke generator fitted as standard with dynamic smoke output Digital decoder and extensive sound and light functions. Locomotive with authentic weathering

  • 2-rail, direct current
  • Sound

Selling price: CHF 431.35 RRP CHF 499.00

On order, shipped within 10-15 days

15% off the recommended price New
Steam Locomotive 12.11
Trix 25012 Scale H0
Steam Locomotive 12.11

Prototype Express steam locomotive with tender 12.11 of the Austrian Federal Railways (ÖBB). Version with dual headlights, small DRG lanterns, large smoke deflectors, long dome cover, closed front end and rebuilt tender of the Class 9184. Operating condition 1952. Model The locomotive has a digital decoder and comprehensive sound functions. It features a regulated high-performance drive with a flywheel mounted in the boiler. One axle is powered, and three axles are powered via the coupling rods. It has traction tyres. The locomotive and tender are largely made of metal. A smoke generator is fitted as standard, with speed-dependent, dynamic smoke output. The dual headlights change over with the direction of travel, work in conventional operation, and can be controlled digitally. Cab lighting and firebox flickering can be controlled separately digitally. Running gear lighting is digitally controllable. The lighting uses maintenance-free warm white and red LEDs. It is equipped with a buffer capacitor. Close coupling with a guide mechanism is provided between the locomotive and tender. The tender has a close coupling with a guide mechanism and an NEM pocket. The buffer height on both the locomotive and tender conforms to NEM standards. The minimum radius for operation is 360 mm. Piston rod protective sleeves and brake hoses are included. Length over the buffers is approx. 25.4 cm. Highlights Completely new tooling Express steam locomotive 12.11 with the rebuilt Class 9184 tender available in the Trix range for the first time Particularly fine metal construction A wide range of prototypical details on the boiler, frame and cab Largely prototypical implementation of the running gear frame under the cab Fitted as standard with a smoke generator and speed-dependent dynamic smoke output Cab lighting and firebox flickering can be controlled digitally Running gear lighting can be controlled digitally With RailCom-capable DCC/mfx digital decoder Buffer height according to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 594.15 RRP CHF 699.00

On order, shipped within 10-15 days

15% off the recommended price
Saxon Pride Class 19.0 Steam Locomotive
Trix 25019 Scale H0
Saxon Pride Class 19.0 Steam Locomotive

Prototype Class 19.0 "Sachsenstolz" express steam locomotive (Saxon class XX HV), with a Saxon 2´2 T31 coal tender. Deutsche Reichsbahn of the DDR (DR/DDR). With large smoke deflectors. Locomotive running number 19 016. The locomotive looks as it did in Era IIIa, at the beginning of the 1950s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 4 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. A smoke unit is fitted as standard, with speed-dependent, dynamic smoke output. The dual headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The cab lighting and the firebox flickering can each be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. Swivelling cab doors and an imitation of the curtains between the cab and the tender. There is a close coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The buffer height on the locomotive and tender conforms to NEM. The minimum radius for operation is R2, 437.5 mm. Piston rod protective sleeves and brake hoses are included. Length over the buffers 26.0 cm. Highlights Completely new development Especially fine metal construction A multitude of separately applied details Fitted as standard with a smoke unit and speed-dependent, dynamic smoke output Cab lighting and firebox flickering can be controlled digitally. RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Buffer height on the locomotive and tender conforms to NEM. With a buffer capacitor to bridge short sections without power Note A matching express coach set and a coach to go with them can be found under item nos. 42514 and 42522 in the Märklin H0 assortment, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 577.15 RRP CHF 679.00

On order, shipped within 10-15 days

15% off the recommended price
Class 18.3 Steam Locomotive
Trix 25029 Scale H0
Class 18.3 Steam Locomotive

Prototype Express steam locomotive 18 314 with oil firing and a 2´2´T34 oil tender of the Deutsche Reichsbahn of the DDR (DR/DDR). Rebuilt version as a test locomotive of the VES-M Halle (Saale). Version with a Reko boiler and partial cladding, based on the steam locomotive 18 314 (former Baden IVh). With Witte smoke deflectors and Indusi on one side. The locomotive looks as it did around 1968. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 3 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. A smoke unit is fitted as standard, with speed-dependent, dynamic smoke output. The triple headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. In addition, two red lamps at the front of the locomotive can be controlled digitally. The cab lighting and the running gear lighting can be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. There is a close coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The minimum radius for operation is 360 mm. For large radii or for a display case, a cladding piece without a wheel cut-out below the cab is included as a replacement. Piston rod protective sleeves and brake hoses are also included. Length over the buffers 27.2 cm. Highlights Especially fine metal construction A multitude of separately applied details Fitted as standard with a smoke unit and speed-dependent, dynamic smoke output Cab lighting and running gear lighting can be controlled digitally. RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 560.15 RRP CHF 659.00

On order, shipped within 10-15 days

Flash offer 25% off the recommended price New
Class Ae 4/4 Electric Locomotive
Trix 25044 Scale H0
Class Ae 4/4 Electric Locomotive

Prototype Ae 4/4 electric locomotive of the Bern-Lötschberg-Simplon Railway (BLS). Basic paint scheme in nut brown. Running number 251. Current operating condition as a working museum locomotive of BLS Historic. Model The locomotive has a digital decoder and comprehensive sound functions. It features a centrally mounted, regulated high-performance drive with a flywheel. All four axles are powered using cardan shafts. It has traction tyres. The triple headlights and a white tail lamp (Swiss lighting changeover) change over with the direction of travel, will work in conventional operation and can be controlled digitally. In solo running, the lighting can be switched to a red tail lamp. The headlights at locomotive end 2 and end 1 can each be switched off separately via digital control. Warning signals, wrong-line signals, and long-distance headlights are digitally controllable. Cab and engine room lighting are digitally controllable. The lighting uses maintenance-free warm white and red LEDs. It is equipped with a buffer capacitor. The roof superstructures are detailed and feature a newly designed pantograph. The pantograph can be raised and lowered digitally. There are many separately applied details. The buffer height conforms to NEM standards. Brake lines, screw couplings, and closed rail guards are supplied as separate plug-in parts. Length over the buffers is 17.9 cm. Highlights Completely new tooling in a highly detailed metal version Newly designed scissors-type pantograph, can be raised and lowered digitally Many separately applied details Cab and engine room lighting can be controlled digitally Additionally switchable warning and wrong-line signals, plus long-distance headlight Close couplings with a guide mechanism Supplied with a digital decoder and a wide range of light and sound functions Capable of DCC, mfx and RailCom Buffer height according to NEM. Supplied with a buffer capacitor to bridge short sections without power.

  • Digital
  • Sound

Selling price: CHF 333.00 RRP CHF 449.00

Pre-order, release expected in Q1 2027

13% off the recommended price New
Class 80 Steam Locomotive
Trix 25080 Scale H0
Class 80 Steam Locomotive

Prototype Class 80 tank locomotive of the German Federal Railroad. Version with three boiler domes, bell and turbo generator on the left, smoke box door without a central locking mechanism and with the number plate in the center. Basic deep black paint scheme. Running number 80 016. The locomotive looks as it did around 1953. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel in the boiler. Three axles powered. Traction tires. Locomotive made largely of metal. Factory-installed smoke generator. Dual headlights that change over with the direction of travel and the smoke generator contact will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Telex couplers on the front and rear can each be controlled separately digitally. Numerous applied grab irons and lines. Buffer height to NEM standards. Brake lines are included as separate parts to be plugged in. Length over the buffers 11.1 cm / 4-3/8". Highlights Delicate version made largely of metal Unobstructed view between the frame and the boiler Many separately applied details For the first time with a smoke generator, factory-installed Unobstructed view through the cab With Telex couplers on the front and rear that can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

Pre-order, release expected in November 2026

15% off the recommended price
Class 1189 Electric Locomotive
Trix 25090 Scale H0
Class 1189 Electric Locomotive

Prototype Class 1189 "Österreichisches Krokodil" electric locomotive of the Austrian Federal Railways (ÖBB). Basic blood orange paint scheme. Running number 1189.02. The locomotive looks as it did in the middle to the end of the 1970s. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a centrally mounted flywheel. 2 driving wheels in each of the two drive bogies are powered using cardan shafts. Traction tyres. Articulated running gear able to negotiate tight curves. The triple headlights and one red tail lamp change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The lighting can be switched over to one white tail lamp. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Double "A" light function. The cab lighting and the engine room lighting can each be controlled separately digitally. The lighting uses maintenance-free warm white and red LEDs. Highly detailed metal version with many separately applied details. Brake hoses and imitation screw couplings are included as separate plug-in parts. Length over the buffers approximately 23.4 cm. Highlights Tooling changes for the prototypical reproduction of the 1189.02 Highly detailed metal version Many separately applied details Cab and engine room lighting can be controlled digitally Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 492.15 RRP CHF 579.00

On order, shipped within 10-15 days

15% off the recommended price New
Class 1189 Electric Locomotive
Trix 25092 Scale H0
Class 1189 Electric Locomotive

Prototype Class 1189 "Austrian Crocodile" electric locomotive of the Austrian Federal Railways (ÖBB). Version with a basic fir green paint scheme. Running number 1189.08. The locomotive looks as it did in the mid to late 1970s. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. 2 driving wheels in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and one red marker light that change over with the direction of travel will work in conventional operation and can be controlled digitally. The lighting can be switched to one white marker light. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are off at both ends of the locomotive, the switching light function is on at both ends (1 white light at each end). Cab and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and engine room interior details. Detailed roof equipment. Minimum radius for operation 360 mm. Brake hoses and imitation screw couplings are included. Length over the buffers approx. 23.4 cm. Highlights New locomotive running number 1189.08 RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 500.65 RRP CHF 589.00

On order, shipped within 10-15 days

13% off the recommended price
Class 211 Diesel Locomotive
Trix 25101 Scale H0
Class 211 Diesel Locomotive

Prototype Class 211 diesel locomotive of the German Federal Railway (DB). The locomotive looks as it did around 1981. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All 4 axles are powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at both ends of the locomotive can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is active at both ends. The cab lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. Detailed buffer beam. Brake hoses that can be plugged in are included. Length over the buffers approximately 13.9 cm. Highlights Cab lighting can be controlled digitally Metal body Centre motor, all four axles powered using cardan shafts RailCom-capable DCC/mfx digital decoder with extensive sound functions

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 293.05 RRP CHF 339.00

On order, shipped within 10-15 days

13% off the recommended price
Class 1100 Electric Locomotive
Trix 25110 Scale H0
Class 1100 Electric Locomotive

Prototype Class 1100 electric locomotive of the Dutch Railways (NS). Locomotive from the 1st production run, without front reinforcement. Dark blue locomotive body with black running gear. With raised decorative trim strips. Bogies with rounded cut-outs. Locomotive running number 1108. The locomotive looks as it did in the middle of the 1970s. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights, in the form of an inverted L signal (2 x yellow below, 1 x white above), and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, there is shunting lighting of 1 x yellow below at each end of the locomotive. The cab lighting and the engine room lighting can each be controlled separately digitally. The lighting uses maintenance-free yellow, warm white, and red LEDs. It has a buffer capacitor. Detailed roof equipment with newly tooled Faively G5 scissors pantographs. Close couplers in standard pockets on the bogies. The buffer height conforms to NEM. Brake lines and screw couplers are included as separate plug-in parts. Length over the buffers 14.9 cm. Highlights Completely new tooling A one-time series for the anniversary "75 Jahre Elektrolokomotive Serie 1100". Locomotive from the 1st production run, without front reinforcement (locomotive numbers 1101 to 1150) Finely detailed metal version with many separately applied details Cab lighting and engine room lighting can be controlled digitally Close couplers in standard pockets RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor to bridge short sections without power Buffer height conforms to NEM Note A matching set of spherical tank wagons can be found in the Märklin H0 assortment under item no. 46632, with information about the DC wheelsets required.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

On order, shipped within 10-15 days

13% off the recommended price New
Class 1100 Electric Locomotive
Trix 25111 Scale H0
Class 1100 Electric Locomotive

Prototype Class 1100 electric locomotive of the Dutch Railways (NS). Current condition as a museum locomotive in the Railway Museum Utrecht. Locomotive from the 1st construction series, without front reinforcement. Colour-approximated condition of the 1950s at entry into service with a turquoise body and agate grey running gear. With raised decorative strips. Bogies with square cut-outs. Locomotive running number 1125. Current museum condition. Model With a digital decoder and extensive light and sound functions. Regulated high-performance drive with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. Dual headlights and two red tail lamps at the top change over with the direction of travel, will work in conventional operation, can be controlled digitally. Special L-signal function (2 x yellow at the bottom, 1 x white at the top) can additionally be controlled digitally. Headlights at locomotive end 2 and 1 can each be switched off separately in digital operation. When the headlights are switched off at both locomotive ends, shunting lighting 1 x yellow at the bottom on each locomotive end. Cab lighting and engine room lighting can each be controlled separately digitally. Lighting with maintenance-free yellow, warm white and red LEDs. With a buffer capacitor. Finely detailed roof superstructures with newly tooled Faively G5 scissors-type pantographs. Close couplings in the standard pocket on the bogie. Buffer height according to NEM. Brake lines and screw couplings are included as separately plug-in parts. Length over the buffers 14.9 cm. Highlights New tooling with prototypical detail changes Version of the museum locomotive with locomotive number 1125 of the Railway Museum in Utrecht Locomotive from the 1st construction series, without front reinforcement (locomotive numbers 1101 to 1150) Delicate metal version with many separately applied details Cab lighting and engine room lighting can be controlled digitally Close couplings in the standard pocket RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor for bridging short sections without power Buffer height according to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 344.90 RRP CHF 399.00

On order, shipped within 10-15 days

13% off the recommended price
Class E10.3 Electric Locomotive
Trix 25128 Scale H0
Class E10.3 Electric Locomotive

Prototype Class E10.3 electric locomotive of the German Federal Railway (DB). Locomotive body with an aerodynamic front, the so-called "Bügelfalte", with a continuous ventilation grille band, a wraparound rain gutter, and handrails on the ends. With buffer cladding and a skirt. Steel blue locomotive body with a stone grey frame. Locomotive running number E10 384. The locomotive looks as it did around 1967. Model The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Double "A" light function. The cab lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. Detailed roof equipment with type DBS 54 pantographs. The pantographs can be raised and lowered digitally. The buffer height conforms to NEM. Close couplers with a guide mechanism. Brake lines, heating lines, and screw couplers are included as separate plug-in parts. Length over the buffers 18.9 cm. Highlights With detailed type DBS 54 pantographs, without visible mounting Pantographs can be raised and lowered digitally Cab lighting can be controlled digitally Close couplers with a guide mechanism RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With a buffer capacitor to bridge short sections without power Buffer height conforms to NEM

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 1800 Electric Locomotive
Trix 25161 Scale H0
Class 1800 Electric Locomotive

Prototype Class 1800 electric locomotive of Strukton Rail B.V. Basic yellow paint scheme with a striking side design by Strukton Rail. Running number 1824 "Nicole". The locomotive looks as it did starting at the end of 2021, with additional decals for "100 Jahre Strukton". Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Additional light functions such as various shunting lights and danger signals can be controlled separately. The cab lighting can be controlled digitally. The lighting uses maintenance-free yellow and red LEDs. The pantographs can be raised and lowered digitally. Separately applied windscreen wipers, ventilation grilles, handrails, and roof lines. The buffer height conforms to NEM. Brake lines are included as separate plug-in parts. Length over the buffers approximately 20.3 cm. Highlights Finely detailed metal version with many separately applied details Pantographs can be raised and lowered digitally Cab lighting can be controlled digitally Many switchable shunting and special signals Buffer height conforms to NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable One-time series This model is available in H0 gauge exclusively from Trix and Märklin.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 370.85 RRP CHF 429.00

On order, shipped within 10-15 days

15% off the recommended price
Class VT 18.16 Diesel Express Powered Rail Car Train
Trix 25175 Scale H0
Class VT 18.16 Diesel Express Powered Rail Car Train

Prototype Class VT 18.16 high-speed diesel multiple unit (type SVT "Görlitz"), as the refurbished heritage train set of the SVT Görlitz gGmbH looks. Based on the version of the Deutsche Reichsbahn of the DDR (DR/DDR) from the 1960s and 1970s, as a flagship for international express services. 4-part unit. 1 power car VTa, 1 intermediate car VMc with a dining area and kitchen, 1 intermediate car VMd, 1 power car VTb. Current operating condition from 2025/26. Model 4-part unit. The train has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel in one power car, all four axles powered using cardan shafts. Traction tyres. The LED interior lighting, cab lighting, driver's desk lighting, engine room lighting, kitchen area lighting, and wall lamps in the dining area, all fitted as standard, can each be controlled digitally. The triple headlights, two red tail lamps, and interior lighting change over with the direction of travel, will work in conventional operation, and can be controlled digitally. All of the lighting uses maintenance-free warm white and red LEDs. Multi-part interior details. Multi-pole current-conducting special couplers guided in a slot between the vehicles. Power supply depending on the direction of travel by way of the leading power car in each case. It has a buffer capacitor. Many separately applied details. A reproduction of the automatic coupler at both ends (non-functional). The minimum radius for operation is 360 mm. Length of the 4-part train set approximately 113 cm. Highlights Completely new tooling True-to-scale reproduction 1:87. Reproduction of the refurbished 4-part heritage train set Highly detailed and heavy metal version High-performance motor with a flywheel in one power car All four axles in one power car powered using cardan shafts Fitted as standard with cab, driver's desk, engine room, and interior lighting RailCom-capable DCC/mfx digital decoder with extensive operating, sound, and light functions With a buffer capacitor to bridge short sections without power Note Märklin is supporting the restoration of this legendary multiple unit with a donation of 25,000.-- euros.

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 934.15 RRP CHF 1,099.00

Pre-order, release expected in Q1 2027

15% off the recommended price
Class 181.2 Electric Locomotive
Trix 25186 Scale H0
Class 181.2 Electric Locomotive

Prototype Class 181.2 electric locomotive of the Schlünß Eisenbahn Logistik (SEL). Basic Orient red paint scheme. Running number 181 218-9. The locomotive looks as it did starting in September 2025 with the name "GÖPPINGEN". Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles are powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be turned off separately digitally. Double "A" light function. The cab lighting, changing with the direction of travel, and the engine room lighting can be controlled digitally. The lighting uses maintenance-free warm white and red LEDs. It has a buffer capacitor. The pantographs can be raised and lowered digitally. Separately applied wheel imitations, handrails, windscreen wipers, UIC sockets, and roof lines. The buffer height conforms to NEM. Brake lines, screw couplers, and various sockets are included as separate plug-in parts. Length over the buffers 20.5 cm. Highlights Name "GÖPPINGEN". Tooling variation for the correct representation of the Era VI version Fine metal construction with many separately applied details Pantographs can be raised and lowered digitally Pantographs prototypically fitted with different contact strips Cab and engine room lighting can be controlled digitally Separately applied wheel imitations Digital decoder with extensive light and sound functions DCC, mfx, and RailCom capable Buffer height conforms to NEM. With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 381.65 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class EB 3200 Electric Locomotive
Trix 25194 Scale H0
Class EB 3200 Electric Locomotive

Prototype Class EB 3200 electric locomotive (Vectron) of the Danish State Railways (DSB). Running number 3203. The locomotive looks as it did in 2020. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. 4 axles powered. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. The long-distance headlights can be controlled separately. The cab lighting can be controlled digitally. The shunting special marker and wrong-line running light functions can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Plug-in brake hoses are included separately. Length over the buffers 21.9 cm. Highlights Locomotive body and frame of the locomotive constructed of die-cast zinc Many separately applied details Numerous light functions can be controlled digitally Digital decoder with extensive operating and sound functions

  • 2-rail, direct current
  • Sound

Selling price: CHF 336.20 RRP CHF 389.00

On order, shipped within 10-15 days

13% off the recommended price
Class 193 Electric Locomotive
Trix 25195 Scale H0
Class 193 Electric Locomotive

Prototype Class 193 electric locomotive (Vectron) of Siemens Dispo GmbH, leased to MRCE, sub-leased to Mercitalia Rail S.r.l. (Rome). Locomotive number X4 E – 643. The locomotive looks as it did in 2016. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. Four axles powered. Traction tyres. The dual headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled separately. The cab lighting can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. The wrong-line running and long-distance light functions can be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Length over the buffers 21.9 cm. Highlights Locomotive body and frame of the locomotive constructed of die-cast zinc Many separately applied details Cab lighting can be controlled digitally Numerous other light functions can be controlled digitally Digital decoder with extensive operating and sound functions

  • 2-rail, direct current
  • Sound

Selling price: CHF 370.75 RRP CHF 429.00

On order, shipped within 10-15 days

13% off the recommended price
Class 370 Electric Locomotive
Trix 25199 Scale H0
Class 370 Electric Locomotive

Prototype Class 370 electric locomotive (Siemens Vectron MS) of PKP Cargo. Running number 370 057. The locomotive looks as it did in 2023. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. 4 axles powered. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled separately. The cab lighting can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. Maintenance-free warm white and red LEDs are used for the lighting. The locomotive has a buffer capacitor. Length over the buffers 21.8 cm. Highlights With a buffer capacitor to bridge short sections without power Locomotive body and frame of the locomotive constructed of die-cast zinc Many separately applied details Cab lighting can be controlled digitally Digital decoder with extensive light and sound functions

  • 2-rail, direct current
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 220 Diesel Locomotive
Trix 25201 Scale H0
Class 220 Diesel Locomotive

Prototype Class 220 diesel locomotive of the Deutsche Bahn AG (DB AG), also known by the nickname "Taigatrommel". With a Soviet-type silencer, intake grilles with vertical louvres, and a radiator fan with fluttering louvres. The locomotive looks as it did in 1994. Running number 220 274. Model The locomotive has a digital decoder and extensive sound functions. It also has a centrally mounted regulated high-performance motor. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. The cab lighting changes over with the direction of travel and can be controlled digitally. The engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Metal grab rails applied on the sides. The front apron can be exchanged for closed front aprons. The DB AG logo is included as a transfer. Length over the buffers approximately 20.2 cm. Highlights With a Soviet-type silencer Buffer height according to NEM. Chassis and body of the locomotive largely constructed of metal Metal grab rails applied on the sides Cab lighting can be controlled digitally Engine room lighting can be controlled digitally DCC/mfx digital decoder with a wide variety of light and sound functions Elaborately designed bogies

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 362.20 RRP CHF 419.00

On order, shipped within 10-15 days

13% off the recommended price
Diesel Locomotive, Road Number T 679.1266
Trix 25202 Scale H0
Diesel Locomotive, Road Number T 679.1266

Prototype Diesel locomotive T 679.1266 of the Czechoslovak State Railways CSD, also known by the nickname "Taigatrommel". With a Soviet-type silencer, intake grilles with horizontal louvres, and a radiator fan with a grille. The locomotive looks as it did around 1980. Model The locomotive has a digital decoder and extensive sound functions. It also has a centrally mounted regulated high-performance motor. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights and 2 red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light function is on at both ends. The cab lighting changes over with the direction of travel and can be controlled digitally. The engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Metal grab rails applied on the sides. The front apron can be exchanged for closed front aprons. Length over the buffers approximately 20.2 cm. Highlights With a Soviet-type silencer Buffer height according to NEM. Chassis and body of the locomotive largely constructed of metal Metal grab rails applied on the sides Cab lighting can be controlled digitally Engine room lighting can be controlled digitally DCC/mfx digital decoder with a wide variety of light and sound functions Elaborately designed bogies

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 362.20 RRP CHF 419.00

On order, shipped within 10-15 days

13% off the recommended price New
Class 120 Diesel Locomotive
Trix 25203 Scale H0
Class 120 Diesel Locomotive

Prototype Class 120 diesel locomotive of the German State Railroad (DR), also known by the nickname "Taiga Drum". Version with a Soviet-design muffler. The locomotive looks as it did in 1973. Running number 120 323. Model With a digital decoder and extensive sound functions. Regulated high-performance motor, centrally mounted. Two axles in each truck powered via cardan shafts. Traction tires. Triple headlights and 2 red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. When the headlights are off at both ends of the locomotive, the double A light function is on at both ends. Cab lighting changes over with the direction of travel and can be controlled digitally. Engine room lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. Metal grab irons applied on the sides. Front skirting can be replaced with closed front skirting. Length over the buffers approx. 20.2 cm. Highlights With buffer height to NEM standards. Locomotive chassis and body made largely of metal Metal grab irons applied on the sides Cab lighting can be controlled digitally Engine room lighting can be controlled digitally Digital decoder with a variety of light and sound functions Elaborately designed trucks

  • 2-rail, direct current
  • Sound

Selling price: CHF 388.10 RRP CHF 449.00

On order, shipped within 10-15 days

13% off the recommended price
Class 193 Electric Locomotive
Trix 25210 Scale H0
Class 193 Electric Locomotive

Prototype Class 193 electric locomotive (Vectron) of SBB Cargo AG in the new design. The locomotive looks as it did in 2024. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor. 4 axles powered. Traction tyres. The triple headlights and 1 white tail lamp change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately digitally. When the headlights are turned off at both ends of the locomotive, the "double A light" function is on at both ends. The changeover between the Swiss lighting changeover and the white/red lighting changeover can be controlled. The long-distance headlights can be controlled digitally. The cab lighting can be controlled digitally. The shunting light, the warning signal, and wrong-line running can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. The locomotive has a buffer capacitor. Plug-in brake hoses are included separately. Length over the buffers 21.9 cm. Highlights New design of SBB Cargo AG. Locomotive body and frame of the locomotive constructed of die-cast zinc Many separately applied details Numerous light functions can be controlled separately digitally RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions With a buffer capacitor to bridge short sections without power

  • 2-rail, direct current
  • Digital
  • Sound

Selling price: CHF 362.20 RRP CHF 419.00

On order, shipped within 10-15 days