Locomotives
Prototype Steam locomotive with a tender, class F 1200, of the Swedish State Railways (SJ). Current operating condition, as the locomotive is at present based in working order in Gävle. Model The locomotive and tender are largely made of metal. The locomotive has a digital decoder and extensive light and sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. One axle powered, two axles powered by coupling rods. Traction tyres. The dual headlights change over with the direction of travel, will work in conventional operation and can be controlled digitally. The lantern on the smoke box door can be controlled separately in digital operation. In addition, the cab lighting and the fire flickering in the firebox can be controlled separately in digital operation. Maintenance-free warm white and red LEDs are used for the lighting. Smoke unit fitted as standard, will work in conventional operation, can be controlled digitally. Adjustable coupler with a guide mechanism between the locomotive and the tender. The tender has a close coupler with a guide mechanism and an NEM pocket. The minimum radius for operation is 360 mm. Various plug-in parts such as steps, brake hoses, piping and an imitation screw coupling are included. Length over the buffers approximately 24.5 cm. Highlights Prototypical tooling changes for the version as the F 1200 Particularly delicate metal construction Smoke generator fitted as standard Cab lighting can be controlled separately in digital operation Fire flickering in the firebox can be controlled digitally The lantern on the smoke box door can be controlled separately in digital operation
- 2-rail, direct current
- Sound
On order, shipped within 10-15 days
Prototype Class Be 4/6 electric locomotive of the Swiss Federal Railways (SBB). Rebuilt version until retirement. Basic fir green paint scheme with traffic gray running gear. With sleeve buffers. Cab doors on the sides and ends partially welded shut and without walkover plates. With sanding gear, an authorization to proceed signal and Integra Signum magnets. Cooling coils on the sides with 11 vertical brackets. Locomotive running number 12323. The locomotive looks as it did in the early 1970s. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Both driving wheels and the jackshaft in each of the two powered frames driven via cardan shafts. Traction tires. Articulated chassis that runs smoothly on curves. Triple headlights and 1 white marker light (Swiss light changeover) that change over with the direction of travel will work in conventional operation and can be controlled digitally. For running light, the lighting can be switched to 1 red marker light. Authorization to proceed signal can be controlled separately digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double A light function. Additional cab lighting and engine room lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. Highly detailed metal version with many separately applied details, such as cooling pipes for the transformer oil. Cab and engine room interior details. With sanding gear on the driving wheel groups. Detailed roof equipment with heating resistors, roof wiring, insulators, lightning arrestor coils and roof walkways. Minimum radius for operation 360 mm. Brake hoses, imitation screw couplings and steps are included. Length over the buffers 18.9 cm. Highlights Prototypical changes in shape, such as cab doors on the ends and sides partially welded shut Changed version with 11 cooling coil brackets Highly detailed metal version RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions Cab and engine room lighting can be controlled digitally Additional red authorization to proceed signal can be controlled digitally With a buffer capacitor for bridging short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Steam locomotive of the series 81 (former Prussian G 8.1) with a coal tender of the Belgian State Railways (NMBS/SNCB). Basic moss green and black paint scheme. Locomotive running number 81.340. The locomotive looks as it did in the early/mid 1950s. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 4 axles powered. Traction tyres. The locomotive and tender are largely constructed of metal. The 72270 smoke unit can be installed in the locomotive. The dual headlights change over with the direction of travel and the retrofittable smoke unit will work in conventional operation and can be controlled digitally. Warm white LEDs are used for the lighting. Fixed close coupler with a guide mechanism between the locomotive and tender. Many separately applied details such as lines and sand pipes. Brake lines and imitation screw couplings are included. Length over the buffers 21 cm. Highlights Digital decoder with extensive operating and sound functions Note A matching coach set can be found in the Märklin H0 assortment under item no. 43054. Various Belgian goods wagons from recent years also go with it, with the item numbers 48832, 46029 or 46984. All of the wagons come with information about the DC wheelsets required.
- 2-rail, direct current
- Sound
On order, shipped within 10-15 days
Prototype General Electric ES44AC heavy diesel electric freight locomotive of the Norfolk Southern (NS). Basic gray/green/black paint scheme of the former Southern Railway. Running number 8099. Current condition as a heritage locomotive. Model With a digital decoder and extensive sound and light functions. Regulated high-performance motor with a flywheel, centrally mounted. Two axles in each truck powered via cardan shafts. Traction tires. Headlights that can be controlled independently of the direction of travel, consisting of four lamps each on the front and rear of the locomotive. Headlights work in conventional operation and can be turned off separately in pairs in digital operation. Cab lighting, number boards, long distance headlights and flashing function of the headlights can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Factory-installed smoke generator with dynamic smoke output, can be controlled digitally. Many separately applied details. For operation with knuckle couplers, the NEM pocket can be fixed with the included clamping pieces. A pilot with a smaller opening for the front, brake hoses and two clamping pieces for the NEM pocket are included. Length over the couplers approx. 27 cm / 10-5/8". Highlights Limited special model with an individually numbered certificate of authenticity Locomotive chassis and body made of metal Variant with additional lamps on the rear walkway Factory-installed smoke generator with dynamic smoke output Many light and sound functions that can be controlled Cab lighting can be controlled digitally Illuminated number boards can be controlled digitally Long distance headlights can be turned on Motor in the center, four axles powered via cardan shafts Operation with knuckle couplers and normal close couplers possible DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power One-time series This model is being produced in 2026 in a one-time series and is limited to 300 pieces worldwide. An individually numbered certificate of authenticity is included.
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class 260 diesel switch engine of the German Federal Railroad (DB). Basic ocean blue/ivory paint scheme. Diesel hydraulic drive with a jackshaft. Hoods and cab in the series production version. Reinforced radiator grille with a wide frame. Cab roof in the form used on locomotives up to approx. V 60 390. Cab roof with ventilation flaps. With train radio and Indusi on both sides. First version of the muffler. With a Dofa stove without a coal bin. Running number 260 106-0. The locomotive looks as it did around 1980. Model With a digital decoder and extensive sound functions. Regulated high-performance motor. One axle powered, two axles and the jackshaft powered via side rods. Traction tires. Triple headlights and two red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Cab lighting can be controlled digitally. Running gear lighting can be controlled digitally. Double A light can be turned on. Maintenance-free LEDs are used for the lighting. With a buffer capacitor. Telex couplers on the front and rear can each be controlled separately digitally. Applied metal grab irons and railings. Length over the buffers approx. 12 cm / 4-3/4". Highlights With Telex couplers on the front and rear that can be controlled separately digitally With coupler slack function Cab lighting Running gear lighting With a buffer capacitor for bridging short sections without power Digital decoder and extensive sound functions. Original Maybach engine operating sound with changeover switch Original sounds such as horn, squealing brakes, compressor, etc. Typical sound when running over a turnout (operating sound)
- 2-rail, direct current
- Sound
On order, shipped within 10-15 days
Prototype Electric locomotive, class 151 of the German Federal Railway (DB). Basic chrome oxide green paint scheme. Running number 151 034-6. The locomotive looks as it did starting in 1974. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. Detailed roof equipment with newly tooled pantographs of the DBS 54 type. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers approximately 22.4 cm. Highlights Completely new tooling in a highly detailed metal version Newly tooled pantographs of the DBS 54 type Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Electric locomotive, class 151 of the Deutsche Bahn AG. Basic traffic red paint scheme. Running number 151 035-3. The locomotive looks as it did starting in 2009. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof equipment with newly tooled single-arm pantographs. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers 22.4 cm. Highlights Variation in the tooling for the correct representation of the Era VI version Newly tooled single-arm pantographs Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Electric locomotive, class 151 of the Deutsche Bahn AG. Basic orient red paint scheme. Running number 151 025-4. The locomotive looks as it did starting in 1998. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. Two axles in each bogie are powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Cab lighting changing with the direction of travel and engine room lighting can be controlled digitally. In addition, a starting lamp can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Detailed roof equipment with pantographs of the DBS 54 type. The pantographs can be raised and lowered digitally. Many separately applied parts such as imitation wheels, grab rails, sand boxes, UIC sockets and roof lines. Buffer height to NEM standards. Brake lines, screw couplers and various sockets are included as separate plug-in parts. Length over the buffers 22.4 cm. Highlights Locomotive faded and weathered Detailed pantographs of the DBS 54 type Pantographs can be raised and lowered digitally Many separately applied details Separately applied imitation wheels Cab and engine room lighting can be controlled digitally Starting lamp can be controlled separately digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Local service diesel railcar, class 648.2 (LINT 41) of the Deutsche Bahn AG (DB AG). Basic traffic red paint scheme. Version with low-level entrances. Used in the Koblenz service area, with the destination display "RE25 Gießen". Railcar running numbers 648 206-0 and 648 706-9. The railcar looks as it did around 2016. Model The railcar has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel located in the Jacobs bogie. 2 axles powered. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. The headlights at railcar ends 2 and 1 can each be switched off separately digitally. Double "A" light function. Interior lighting fitted as standard. Maintenance-free warm white and red LEDs are used for the headlights and the interior lighting. The destination display is prototypical with yellow LEDs. The headlights, destination display and interior lighting will work in conventional operation and can be controlled digitally. Detailed version of the running gear and the body. Unobstructed view through the windows. Closed diaphragm and guide mechanism on the Jacobs bogie between the vehicle halves. Representation of the centre buffer couplers at the ends. Total length approximately 48.1 cm. Highlights LED interior lighting fitted as standard. With a RailCom-capable DCC/mfx digital decoder Illuminated destination display "RE25 Gießen"
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class M28 diesel shunting locomotive as a works locomotive of the Märklin plant in Györ, Hungary. Former shunting locomotive of the Hungarian State Railways (MÁV). Chrome oxide green basic paint scheme. Running number M28.1001. Current visually refurbished condition, Era IV appearance. Model With a 21-pin digital interface. Regulated high-performance drive. Both axles powered, one of them via the coupling rod. Traction tyres. Triple headlights that change over with the direction of travel will work in conventional operation. Lighting with maintenance-free warm white LEDs. Handrails and many other details separately applied. Buffer height to NEM. Length over the buffers approx. 8.5 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Buffer height to NEM
- 2-rail, direct current
Pre-order, release expected in Q1 2027
Prototype EG 524 HALLE electric locomotive (later Class E 71.1) of the German State Railroad Company (DRB). Basic brown-green paint scheme. Running number EG 524. The locomotive looks as it did starting in 1921. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel, centrally mounted. Both axles in each powered truck driven via cardan shafts. Traction tires. Dual headlights and two red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. In addition, the third headlight as a light for meeting oncoming trains and the cab lighting can be controlled digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab irons and brake hoses. Both powered trucks connected to each other by a side rod. Buffer height to NEM standards. A booklet provides information on the history of the locomotive. Length over the buffers 13.3 cm. Locomotive 1 of 6 in the collector series "History of Electric Locomotives from Era I-VI". Highlights Extensive changes in shape for a correct rendering as an Era I variant Completely new tooling for the pantographs Especially delicate metal version Many separately applied details Cab lighting can be controlled digitally Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power With an included booklet on the history of the locomotive
- 2-rail, direct current
- Digital
- Sound
Pre-order, release expected in December 2026
Prototype Electric locomotive, class 186 of the Deutsche Bahn AG. Basic traffic red paint scheme. Running number 186 339-8. The locomotive looks as it did starting in 2019. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. High beams can be controlled. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. The cab and driver's desk lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab rails, sand boxes, UIC sockets and roof lines. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, France and Belgium. Buffer height to NEM standards. Brake lines, screw couplers, sockets and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details High beams, cab and driver's desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Shunting and special markers for Belgium and France that can be controlled Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Electric locomotive, class 186 of Akiem SAS, leased to SBB Cargo International. Basic light grey paint scheme with two differently designed side surfaces. Running number 186 904-9 "Ceneri". The locomotive looks as it did starting in 2022. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a centrally mounted flywheel. All four axles powered using cardan shafts. Traction tyres. The triple headlights change over with the direction of travel and two red tail lamps will work in conventional operation and can be controlled digitally. High beams can be controlled. The headlights at locomotive ends 2 and 1 can each be switched off separately digitally. Double "A" light function. The cab and driver's desk lighting can each be controlled separately digitally. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab rails, sand boxes, UIC sockets and roof lines. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, Switzerland and Italy. Buffer height to NEM standards. Brake lines, screw couplers, sockets and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details High beams, cab and driver's desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Many shunting and special markers for Italy and Switzerland that can be controlled Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom-capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class 186 electric locomotive owned by Railpool GmbH, leased to HSL. Running number 186 181-4. The locomotive looks as it did starting in 2018 with an attractive "HSL - Wir verbinden Europa" advertising design. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. The cab lighting and the control desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for the lighting. It has a buffer capacitor. Many separately applied parts such as handrails, sandboxes, UIC sockets, and roof cables. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, Belgium, the Netherlands, and Austria. Buffer height per NEM. Brake lines, screw couplers, sockets, and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long-distance headlights, cab lighting, and control desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Controllable shunting and special markers for Belgium and the Netherlands Buffer height per NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class 186 electric locomotive of the Euro Cargo Rail (ECR). Light grey basic paint scheme. Running number 186 310-9. The locomotive looks as it did starting in 2018. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. All four axles powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. The cab lighting and the control desk lighting can each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for the lighting. It has a buffer capacitor. Many separately applied parts such as handrails, sandboxes, UIC sockets, and roof cables. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, France, and Belgium. Buffer height per NEM. Brake lines, screw couplers, sockets, and closed pilots are included as separate plug-in parts. Length over the buffers 21.7 cm. Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long-distance headlights, cab lighting, and control desk lighting can be controlled digitally Newly tooled pantographs with different contact strips Controllable shunting and special markers for Belgium and France Buffer height per NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class elT electric powered rail car with a class elS cab control car of the German State Railroad Company (DRG). Version with front doors on the powered rail car and a cab control car with walkover plates on the ends. Marker lanterns mounted at the top. Arrangement of the sand boxes as delivered. Beige/wine red paint scheme. Running numbers elT 1126 and elS 2126. Cab control car elS with the destination board "To Ismaning - To München Ost Pbf". Home station Munich. The train looks as it did in 1932. Model Class elT powered rail car as the powered unit with a digital decoder and extensive sound functions. Regulated high-performance motor. Four axles powered. Traction tires. Dual headlights and two red marker lights across both units on the outer ends changing over with the direction of travel, can be controlled digitally. Additional 3rd headlight at the top as a light for meeting oncoming trains, on the leading end in the direction of travel, can be controlled separately digitally. Both units are permanently coupled to each other with a multi-conductor coupler. Interior lighting in the elT powered rail car and elS cab control car will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. The headlights on powered rail car end 1 and cab control car end 2 can each be turned off separately in digital operation. Cab lighting in the outer cabs can be controlled separately digitally. With a buffer capacitor. Very detailed running gear and body. Car body and car floor made of metal. Multi-part and multi-colored interior details. Replica bell, brake lines and two close coupler heads are included. Total length over the buffers approx. 46.8 cm / 18-7/16". Highlights Prototypical changes in shape With a buffer capacitor for bridging short sections without power Car body and car floor made of metal Factory-installed LED interior lighting Powered rail car and cab control car in different and very detailed versions Individually designed, multi-colored interior details With a digital decoder Cab lighting can be controlled digitally Elaborate paint scheme according to the DRG standards One-time series One-time series.
- 2-rail, direct current
- Sound
On order, shipped within 10-15 days
Prototype Electric railcar ET 85 with an ES 85 driving trailer of the German Federal Railway (DB). Version with tail signal lanterns mounted up high, in a purple red paint scheme. Running numbers ET 85 21 and ES 85 20. Home depot Munich. The unit looks as it did starting in 1958. Model The ET 85 is the powered unit with a digital decoder and extensive sound functions. Regulated high-performance motor. Four axles powered. Traction tyres. Triple headlights and two red tail lamps at the outer ends over both units, changing over with the direction of travel, can be controlled digitally. Both units are permanently coupled to one another by a multi-pole coupling. The interior lighting in the ET 85 railcar and the ES 85 driving trailer will work in conventional operation and can be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. The headlights at railcar End 1 and driving trailer End 2 can each be turned off separately, digitally. The cab lighting in the outer cabs can be controlled separately, digitally. Very detailed version of the running gear and the body. The car body and the car floor are of metal. Multi-part, multi-coloured interior details. Reproductions of brake lines and two close coupler heads are included. Total length over the buffers approximately 46.8 cm. Highlights Completely new tooling Car body and car floor of metal LED interior lighting fitted as standard Railcar and driving trailer in different and very detailed versions Interior details designed individually and in several colours With a RailCom-capable DCC/mfx digital decoder Cab lighting can be controlled digitally
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class RCe 2/4 electric express railcar "Roter Pfeil", 3rd class, maintained as a heritage vehicle for special runs by the Oensingen-Balsthal-Bahn AG (OeBB). Refurbished, the railcar externally reproduces its condition in the middle of the 1950s in the purple red basic paint scheme of the SBB. Railcar running number 607. The railcar looks as it did in 2023. Model The railcar has a digital decoder and extensive light and sound functions. Regulated high-performance motor. Special motor with a flywheel and a cardan shaft to the drive bogie. 2 axles powered. Traction tyres. Swiss lighting changeover, triple headlights and 1 white tail lamp will work in conventional operation and can be controlled digitally. They can also be changed over to a red tail lamp. Interior lighting fitted as standard. Maintenance-free warm white and red LEDs are used for the headlights and the interior lighting. Various ambient sounds can also be triggered by means of the function buttons. Length over the buffers 25.7 cm. Highlights 125 years since the opening of the Oensingen-Balsthal-Bahn Railcar with interior lighting fitted as standard. Headlights and interior lighting with warm white LEDs. Can be changed over to a red tail lamp With a RailCom-capable DCC/mfx digital decoder and a wide range of operating and sound functions Note In good time for the 125th anniversary of the opening of the Oensingen-Balsthal-Bahn, the RCe 2/4 607 "Roter Pfeil" express railcar was restored to operating condition and can now be hired again for special runs.
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Heavy class 193 goods train electric locomotive of the German Federal Railway (DB). Chrome oxide green basic paint scheme. 6 sandboxes, a starting lamp, and Indusi. Locomotive running number 193 008-0. Stuttgart Railway Division, Kornwestheim locomotive depot. The locomotive looks as it did around 1976. Model The locomotive has a digital decoder and extensive sound and light functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. 2 axles in each drive bogie powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. When the headlights are turned off at both ends of the locomotive, the double "A" light works at both ends. The cab lighting can be controlled digitally depending on the direction of travel. A starting lamp can also be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. Applied handrails. The cabs and the engine room have relief interior details. Plug-in brake hoses and coupler hooks are included separately. Length over the buffers 20.3 cm. Highlights Locomotive for the "175 Jahre Eröffnung Geislinger Steige" anniversary. Detailed version largely of metal RailCom-capable DCC/mfx digital decoder with extensive operating and sound functions. Starting lamp can be controlled digitally Cab lighting can be controlled digitally Note A suitable goods wagon set can be found in the Märklin H0 assortment under item no. 47371, with information about changing the wheelsets to DC wheelsets.
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Heavy class 44 goods train steam locomotive, with a standard design 2´2´T34 coal tender, of the Austrian Federal Railways (BBÖ). Black basic paint scheme. With Wagner smoke deflectors of the standard version, Reichsbahn lamps, a leading wheelset with spoked wheels, a central smoke box door lock, and without an Indusi magnet. Locomotive running number 44 542. The locomotive looks as it did around 1949. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel in the boiler. 5 axles powered. Traction tyres. The locomotive and coal tender are largely of metal. The 7226 smoke unit can be installed in the locomotive. The dual headlights change over with the direction of travel and they and the smoke unit that can be retrofitted will work in conventional operation and can be controlled digitally. The cab lighting, firebox flickering, and flickering in the ash pan can also each be controlled separately, digitally. Maintenance-free warm white and red LEDs are used for the lighting. There is a close coupler with a guide mechanism between the locomotive and the tender. There is a close coupler with a guide mechanism and an NEM pocket on the rear of the tender and on the front of the locomotive. The minimum radius for operation is 360 mm. Piston rod protective sleeves, brake hoses, and imitation screw couplings are included. Length over the buffers 26 cm. Highlights Tooling variation Version with Wagner smoke deflectors Air and feed pumps offset on the running board Prototypical change in the shape of the running board The running board slopes down at the smoke box towards the buffer beam With Reichsbahn lamps as dual headlights on the locomotive and tender Cab lighting, firebox flickering, and flickering in the ash pan can be controlled digitally Open bar frame with a largely clear view between the running gear and the boiler High-performance motor with a flywheel in the boiler With a RailCom-capable DCC/mfx digital decoder Note A suitable vintage tank wagon set can be found in the Märklin H0 assortment under item no. 46755 with information about the DC wheelsets required.
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Class 2019 dual-power locomotive (Stadler Euro9000) of the European Loc Pool AG (ELP), leased to Rail Force One. Grey/black basic paint scheme in an attractive RFO design. Running number 2019 302-9. The locomotive looks as it did starting in 2023. Model The locomotive has a digital decoder and extensive sound functions. It also has a regulated high-performance motor with a flywheel, centrally mounted. Two axles in each bogie powered using cardan shafts. Traction tyres. The triple headlights and two red tail lamps change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The long-distance headlights can be controlled. The headlights at Locomotive Ends 2 and 1 can each be turned off separately, digitally. Double "A" light function. The cab lighting changing over with the direction of travel and various shunting and special markers can be controlled digitally. Coupler compartment lighting can also be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. It has a buffer capacitor. Many separately applied parts such as handrails, sandboxes, UIC sockets, and roof cables. Detailed roof equipment with four newly tooled pantographs with different contact strips for use in Germany, the Netherlands, Belgium, Switzerland, and Italy. All four pantographs can be raised and lowered separately, digitally, independently of one another. The fan wheels on the roof are powered and can be controlled digitally. Buffer height per NEM. Brake lines, screw couplers, and closed pilots are included as separate plug-in parts. Length over the buffers 26.4 cm. Highlights Completely new tooling in a highly detailed metal version For the first time, all four pantographs can be raised and lowered separately, digitally Many separately applied details Long-distance headlights and cab lighting can be controlled digitally Coupler compartment lighting can be controlled digitally Controllable shunting and special markers for the Netherlands, Belgium, Switzerland, and Italy Powered fan wheels on the roof Highly detailed roof design Buffer height per NEM. Digital decoder with extensive operating and sound functions DCC, mfx, and RailCom capable With a buffer capacitor to bridge short sections without power
- 2-rail, direct current
- Digital
- Sound
Pre-order, release expected in Q2 2027
Prototype Class 2159 dual power locomotive (Stadler Eurodual) of European Loc Pool AG (ELP), leased to Railsystems RP. Basic silver/blue paint scheme. Running number 2159 234-4. The locomotive looks as it did starting in 2023. Model With a digital decoder and extensive sound functions. Regulated high-performance motor with a flywheel, centrally mounted. Two axles in each truck powered via cardan shafts. Traction tires. Triple headlights and two red marker lights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Long distance headlights can be turned on. The headlights at Locomotive End 2 and 1 can each be turned off separately in digital operation. Double A light function. Cab lighting changing over with the direction of travel and engine room lighting can be controlled digitally. In addition, coupler area lighting can be controlled digitally depending on the direction of travel. Maintenance-free warm white and red LEDs are used for the lighting. With a buffer capacitor. Many separately applied parts such as grab irons, sand boxes, UIC receptacles and roof wiring. Detailed roof equipment with two newly designed pantographs. Pantographs can be raised and lowered digitally. Fan wheels on the roof powered and can be controlled digitally. Buffer height to NEM standards. Brake lines, prototype screw couplers and closed pilots are included as separate parts to be plugged in. Length over the buffers 26.4 cm / 10-3/8". Highlights Completely new tooling in a highly detailed metal version Many separately applied details Long distance headlights, cab and engine room lighting can be controlled digitally Coupler area lighting can be controlled digitally Newly designed pantographs can be raised and lowered digitally Powered fan wheels on the roof Highly detailed roof design Buffer height to NEM standards. Digital decoder with extensive operating and sound functions DCC, mfx and RailCom capable With a buffer capacitor for bridging short sections without power
- 2-rail, direct current
- Digital
- Sound
Pre-order, release expected in Q2 2027
Prototype Class 01.5 express steam locomotive with a 2'2'T34 coal tender. Reconstructed version of the German State Railroad of the GDR (DR/DDR). Basic black paint scheme with white decorative striping and red running gear. With Boxpok wheels, Witte smoke deflectors in a special design for the Class 01.5, a continuous dome casing and side skirting on the running boards. Locomotive running number 01 504. The locomotive looks as it did in the 1960s. Model With a digital decoder and extensive light and sound functions. Regulated high-performance motor with a flywheel in the boiler. 3 axles powered. Traction tires. Locomotive and tender made largely of metal. Factory-installed smoke generator. Triple headlights that change over with the direction of travel will work in conventional operation and can be controlled digitally. Cab lighting can also be controlled digitally. Maintenance-free warm white LEDs are used for the lighting. With a buffer capacitor. Close coupling with a guide mechanism between the locomotive and tender. Close coupler with a guide mechanism and an NEM pocket on the tender. Minimum radius for operation 360 mm. Piston rod protection sleeves and brake hoses are included. Length over the buffers 28.2 cm / 11-1/8". Highlights Different design with side skirting on the running boards Black steam locomotive paint scheme with red running gear Delicate model made largely of metal Continuous dome casing Open bar frame and many applied details Factory-installed smoke generator RailCom-capable DCC/mfx digital decoder with a variety of operating and sound functions With a buffer capacitor for bridging short sections without power
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days
Prototype Heavy US steam locomotive of Class 3900 "Challenger", in the rebuilt version with an oil tender of the Union Pacific Railroad (UP). Version in the condition of a museum locomotive in Cody Park in North Platte NE, with the running number 3977. Era III and VI. Model The locomotive has a digital decoder and extensive light and sound functions. Various operating sounds such as refilling oil and water, or the sounds of the sliding window and ventilation flaps on the cab opening and closing, can also be controlled digitally. Regulated high-performance drive with a flywheel in the boiler. 6 axles powered. Traction tyres. Articulated running gear able to negotiate tight curves. Boxpok wheels. Headlight on the locomotive and tender. Headlights will work in conventional operation, can be controlled digitally. Cab lighting and illuminated number boards/marker lights can be controlled separately digitally. Lighting with maintenance-free warm white LEDs. Buffer capacitor. Dynamic smoke output dependent on speed fitted as standard and also can be controlled digitally. Powerful speaker in the tender. Imitation coupling at the front can be plugged into the standard pocket on the rail guard. Close coupling with a guide mechanism between locomotive and tender. Steam lines on the front drive bogie are guided with the cylinders and can swivel. Separately applied metal handrails. Many other separately applied details. Driver and fireman figures in the cab. Locomotive screwed to a display base as transport protection. Length over the couplings 42.5 cm. Highlights Limited worldwide to 500 pieces Numbered certificate of authenticity is included Dynamic smoke output dependent on speed fitted as standard Heavy metal version with many separately applied details Driver and fireman in the cab Distinctive smoke deflectors RailCom-capable DCC/mfx digital decoder with extensive light and sound functions With buffer capacitor, for bridging short sections without power One-time series One-time series. Note Notes on operation: The locomotive can be used on curved track from a radius of 360 mm, but we recommend larger radii. Due to the overhang of the long boiler, signals, catenary masts, bridge railings, tunnel portals etc. must maintain sufficient clearance from the track curve. For the high weight of the locomotive the track must be firmly fastened. Turntable and traverser can only be driven over in the through position. Products bearing "Union Pacific" are made under trademark license from the Union Pacific Railroad Company.
- 2-rail, direct current
- Digital
- Sound
On order, shipped within 10-15 days